Minimum

The data for Minimum with the AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 5060 shows a performance profile dominated by the graphics card at higher resolutions. The measured frame rates across the three resolutions reveal a clear scaling pattern that shifts from GPU-bound at 4K to a more balanced load at 1080p. This analysis breaks down the measured FPS, the role of each component, and provides actionable settings recommendations based solely on the provided benchmark data.

Resolution Scaling

The frame rate progression from 1080p to 4K demonstrates a steep drop-off that indicates the RTX 5060 is the primary limiting factor at higher pixel counts. At 1080p with Low settings, the combo produces 215 FPS. Moving to 1440p Low, that figure falls to 139 FPS, a reduction of 76 FPS. At 4K Low, the average drops further to 75 FPS. This pattern—a roughly 35% decrease from 1080p to 1440p and another 46% decrease from 1440p to 4K—shows that the GPU’s rendering workload scales almost linearly with pixel count.

The Ultra preset tells a similar story but with lower absolute numbers. At 1080p Ultra, the average is 105 FPS. At 1440p Ultra, it falls to 68 FPS, and at 4K Ultra, it reaches just 37 FPS. The gap between Low and Ultra at each resolution is substantial, which confirms that the GPU is doing the heavy lifting. At 1080p, the difference between Low and Ultra is 110 FPS, while at 4K, the same settings gap is only 38 FPS. This narrowing difference at higher resolutions suggests that the CPU has more headroom at 4K, but the GPU is saturated.

The data indicates that the RTX 5060, with its 8 GB of GDDR7 memory and 128-bit bus, hits a performance ceiling at 4K. The measured bandwidth of 448.0 GB/s is sufficient for 1080p and 1440p, but the 4K resolution requires more pixel throughput than the card can deliver at playable frame rates on higher presets. The 4K Medium result of 57 FPS (with min 49 and max 66) is the only 4K setting that approaches a playable average, but it still dips below 60 FPS in the minimum frame rate. This suggests that 4K gaming on this combo is only viable on Low settings, where the 75 FPS average provides a smooth experience.

CPU Role

The Ryzen 5 5500X3D brings six cores and twelve threads based on the Zen 3 architecture, with a base clock of 3.00 GHz and a boost clock of 4.00 GHz. While the CPU’s clock speeds are modest compared to newer designs, the 96 MB of shared L3 cache is a significant asset. The benchmark results for the CPU show a Passmark multithread score of 20363 and a single-thread score of 2941, placing it in the 85th percentile of all CPUs.

In Minimum, the CPU’s role becomes more apparent at lower resolutions where the GPU is less stressed. At 1080p Low, the combo achieves 215 FPS, which is likely near the CPU’s ceiling for this game. The fact that the FPS drops to 139 at 1440p Low and 75 at 4K Low indicates that the GPU is the bottleneck at higher resolutions, but the CPU can still keep up with the game’s logic at 1080p. The CPU’s nearest rival, the AMD Ryzen 5 5600F, has an average score of 36945, which is only 0.2% lower than the 5500X3D’s average benchmark score of 37018. This suggests that the 5500X3D is not a weak link in the system.

The CPU’s L3 cache is likely more important than its clock speed for this game. The 96 MB shared cache helps with data reuse, which can improve frame pacing in scenarios with many objects or AI entities. However, the measured FPS data does not show any CPU-related stutters, as the minimum FPS values are only recorded for Medium settings at each resolution. At 1080p Medium, the minimum is 140 FPS, which is still high, indicating that the CPU is not causing frame drops. The boost clock of 4.00 GHz is sufficient to drive the GPU at 1080p, but the system’s overall performance is more reliant on the GPU’s capabilities.

FAQ

Q: What is the best resolution for this combo to maintain a high refresh rate?

A: At 1080p, the combo can achieve 138 FPS on High settings and 165 FPS on Medium, making it suitable for high-refresh-rate monitors. At 1440p, the High preset delivers 89 FPS, which is still playable but not as fluid.

Q: Can this system handle 4K gaming?

A: The data shows 4K is only viable on Low settings, where the average FPS is 75. On Medium, the average drops to 57 FPS, which is below the 60 FPS threshold for smooth gameplay.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 5 5500X3D has an average benchmark score of 37018, which is 0.2% higher than the AMD Ryzen 5 5600F and 0.2% higher than the Intel Core Ultra 5 225. It is 0.2% lower than the AMD Ryzen AI 7 PRO 450.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 1440p, the Low preset averages 139 FPS, while the Ultra preset averages 68 FPS. This represents a 71 FPS difference, showing a significant performance cost for the highest visual quality.

Q: Is the GPU’s 8 GB VRAM sufficient for this game?

A: The measured results do not indicate any VRAM-related issues, as the game runs on all settings without reported failures. The 8 GB GDDR7 memory is likely adequate for Minimum's requirements.

Q: What is the minimum FPS recorded for this combo?

A: The lowest minimum FPS recorded is 49, which occurs at 4K Medium settings. The minimum FPS values for other settings are not provided in the data.

Settings Recommendations

Based on the measured FPS, the optimal settings depend on the target resolution and desired frame rate. For 1080p, the High preset is the best balance, delivering 138 FPS average. This is well above the 60 FPS threshold and close to the 144 Hz refresh rate that many monitors support. The Ultra preset at 1080p drops to 105 FPS, which is still playable but offers diminishing returns for the visual fidelity. The Medium preset at 1080p provides 165 FPS, which is excellent for competitive play, but High is preferred for a better visual experience without sacrificing smoothness.

At 1440p, the High preset yields 89 FPS, which is suitable for a 60 Hz or 75 Hz monitor. The Medium preset at 1440p offers 106 FPS, making it a better choice for higher refresh rates. The Ultra preset at 1440p drops to 68 FPS, which is borderline for smooth gameplay. For a balance of quality and performance, Medium is recommended at 1440p, as it provides a comfortable frame rate margin above 60 FPS.

For 4K, the Low preset is the only viable option, with an average of 75 FPS. The Medium preset at 4K averages 57 FPS, which is below the ideal threshold. The High and Ultra presets at 4K are not recommended, as they average 48 FPS and 37 FPS respectively, which would result in noticeable stuttering. The data suggests that 4K gaming on this combo should be limited to Low settings for a playable experience, or the user should consider lowering the resolution to 1440p for better visual quality.

How This Combo Ranks

The AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 5060 combo ranks 1253 out of 2939 tested combinations for Minimum. This places it in the 42nd percentile of all combos, meaning it outperforms a significant portion of systems but is not at the top of the charts. The rank is calculated based on the measured FPS across all settings and resolutions, and it reflects the system’s overall capability in this specific game.

The GPU’s percentile rank of 72 for all GPUs is higher than the combo’s overall rank, which suggests that the CPU is slightly limiting the system’s potential. The CPU’s percentile rank of 85 is solid, but the combination of the two components results in a mid-tier ranking. The nearest GPU rivals include the AMD Radeon 860M, which has an average score of 26401 (0.3% higher), and the NVIDIA GeForce MX550, which scores 26421 (0.3% higher). The RTX 5060’s average benchmark score of 26331 is lower than these rivals, but the measured FPS in Minimum shows that the combo is still capable of high frame rates at lower resolutions.

The combo’s rank of 1253 out of 2939 means that roughly 57% of tested systems perform better in this game. This is a reasonable result for a mid-range setup, and the data shows that the system excels at 1080p gaming but struggles at 4K. The rank is a single number that summarizes the system’s overall performance, but the resolution-specific data provides a more detailed picture of its strengths and weaknesses.

Measured FPS Breakdown

The measured FPS data provides a complete picture of the system’s performance at each resolution and settings preset. At 1920x1080, the Low preset achieves an average of 215 FPS, which is the highest measured frame rate. The Medium preset averages 165 FPS with a minimum of 140 FPS and a maximum of 190 FPS. The High preset averages 138 FPS, and the Ultra preset averages 105 FPS. These numbers show that the system can easily handle 1080p at any settings, with even the Ultra preset providing a smooth experience above 100 FPS.

At 2560x1440, the frame rates drop significantly. The Low preset averages 139 FPS, while the Medium preset averages 106 FPS with a minimum of 90 FPS and a maximum of 122 FPS. The High preset averages 89 FPS, and the Ultra preset averages 68 FPS. The 1440p results show that the system is still capable of high frame rates on lower presets, but the Ultra preset falls below the 70 FPS mark.

At 3840x2160, the system’s limits are apparent. The Low preset averages 75 FPS, which is the only playable option. The Medium preset averages 57 FPS with a minimum of 49 FPS and a maximum of 66 FPS. The High preset averages 48 FPS, and the Ultra preset averages 37 FPS. The 4K results show a steep decline in performance, with the Ultra preset delivering less than half the frame rate of the 1080p Ultra preset.

The minimum FPS values are only recorded for the Medium preset at each resolution: 140 FPS at 1080p, 90 FPS at 1440p, and 49 FPS at 4K. These minimums indicate that the system maintains consistent frame delivery at lower resolutions, but at 4K, the minimum FPS can drop below the average, suggesting potential stutters in demanding scenes.

GPU Role

The NVIDIA GeForce RTX 5060 is the dominant component in this system for Minimum. The GPU features 8 GB of GDDR7 memory on a 128-bit bus, providing a bandwidth of 448.0 GB/s. The base clock is 2280 MHz, with a boost clock of 2497 MHz. The memory clock is 1750 MHz, which translates to 28 Gbps effective. These specifications place the GPU in the 72nd percentile of all GPUs, with an average benchmark score of 26331.

The GPU’s role is evident in the resolution scaling. At 1080p, the GPU has enough headroom to deliver high frame rates, but at 4K, it becomes the bottleneck. The measured FPS at 4K Ultra (37 FPS) is less than half of the 1080p Ultra result (105 FPS), which is a direct result of the GPU’s limited pixel throughput. The GPU’s 48 ROPs are responsible for pixel output, and at 4K, the pixel rate of 119.9 GPixel/s is insufficient for higher presets.

The GPU’s FP32 performance of 19.18 TFLOPS is a measure of its compute capability, which is adequate for this game at lower resolutions. The RTX 5060’s nearest rivals include the AMD Radeon RX 6750 XT, which has an average score of 26011 (1.2% lower), and the AMD Radeon RX 5700 XT 50th Anniversary, which scores 26553 (0.8% higher). Despite these rivals having similar average scores, the RTX 5060’s measured performance in Minimum is strong at 1080p, but the 8 GB VRAM may limit future titles that require more memory.

The GPU’s TDP of 145 W is modest, and the suggested PSU of 300 W indicates that the system does not require a high-wattage power supply. The GPU’s memory bandwidth of 448.0 GB/s is a key factor in its performance at higher resolutions, and the data shows that it is sufficient for 1440p but not for 4K on high presets. The GPU’s role is to render the frame, and the measured FPS shows that it performs best when the resolution is kept at 1080p or 1440p.