Microsoft Flight Simulator

Microsoft Flight Simulator

AVERAGE FPS
23
limited

This combination may struggle with this title, averaging 23 FPS. Consider upgrading hardware or significantly lowering settings.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 13 14 18 23
1440p QHD 17 18 24 31
1080p Full HD 22 23 30 39

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 23
3840x2160 Medium 18
3840x2160 High 14
3840x2160 Ultra 13
2560x1440 Low 31
2560x1440 Medium 24
2560x1440 High 18
2560x1440 Ultra 17
1920x1080 Low 39
1920x1080 Medium 30
1920x1080 High 23
1920x1080 Ultra 22

Microsoft Flight Simulator with Intel Core i5-14600KF + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis

# How This Combo Ranks

This combination of the Intel Core i5-14600KF and NVIDIA GeForce GTX 1050 Ti ranks extremely poorly for Microsoft Flight Simulator, sitting at position 3665 out of 3714 tested combos. That places it in the bottom 1.3% of all configurations tested for this flight simulator, a result that indicates a severe hardware imbalance. The ranking reflects not just low absolute performance, but a pairing where the GPU is dramatically underpowered relative to the CPU's capabilities. The data shows this combo is only 49 positions away from the absolute bottom of the tested pool, meaning nearly every other combination of processor and graphics card delivers better playable performance in this title.

# GPU Role

The NVIDIA GeForce GTX 1050 Ti is the clear bottleneck in this configuration. With only 4 GB of GDDR5 memory on a 128-bit bus delivering 112.1 GB/s of bandwidth, this Pascal-era GPU (14 nm process, 3,300 million transistors) is fundamentally limited for a modern flight simulator. The GPU's base clock sits at 1291 MHz with a boost of 1392 MHz, while memory operates at 1752 MHz (7 Gbps effective). These clocks are modest by any standard, and the 2.138 TFLOPS of FP32 compute power puts it in the lowest quartile of all GPUs — the data shows it ranks in the 25th percentile versus all GPUs tested.

The GTX 1050 Ti's benchmark scores reinforce this picture. Its PassMark G3D score is 6340, with DirectX 12 performance scoring just 26 in PassMark, DirectX 11 scoring 45, and DirectX 10 scoring 31. The GPU's average benchmark score of 4193 places it in close competition with the AMD Radeon R5 M330 (0.6% ahead), NVIDIA Quadro K2100M (1% ahead), while trailing the NVIDIA Quadro K3000M by 1.1% and AMD Radeon Vega 3 by 1.8%. This is entry-level territory, and in Microsoft Flight Simulator's demanding rendering environment, the GPU's 768 shading units and 32 ROPs are simply overwhelmed.

The 4 GB VRAM capacity is particularly problematic for this game, which loads extensive terrain textures, aircraft models, and environmental detail. At higher settings, the simulator's memory demands quickly exceed what this GPU can hold, forcing texture streaming and causing frame rate collapses. The GPU has no ray tracing cores and no tensor cores, so it relies entirely on traditional rasterization through its DirectX 12 (12_1) and Vulkan 1.4 API support.

# Resolution Scaling

The measured FPS data reveals how the GTX 1050 Ti struggles as resolution increases. From 1920x1080 to 2560x1440, the average frame rate drops by roughly 20-25% across all settings, and moving from 1440p to 4K (3840x2160) produces another similar drop. This scaling pattern is consistent with a GPU that is memory-bandwidth and fill-rate limited rather than compute limited.

At 1080p Low, the combo achieves 39 FPS average, which is the only playable result in the entire dataset. Dropping to 1440p Low yields 31 FPS — a 20.5% reduction. At 4K Low, the average falls to 23 FPS, which is a further 25.8% reduction from 1440p. The scaling from 1080p Low to 4K Low represents a total 41% loss in average frame rate, demonstrating that the GPU's 112.1 GB/s bandwidth cannot sustain higher pixel counts.

The pattern becomes even more pronounced at higher settings. At Medium settings, 1080p averages 30 FPS, 1440p averages 24 FPS (20% lower), and 4K averages 18 FPS (25% lower from 1440p). At High settings, 1080p gives 23 FPS, 1440p gives 18 FPS (21.7% lower), and 4K gives 14 FPS (22.2% lower). The Ultra preset shows similar arithmetic: 22 FPS at 1080p, 17 FPS at 1440p (22.7% lower), and 13 FPS at 4K (23.5% lower). This consistent ~20-25% drop per resolution step indicates the limiting component is the GPU's pixel processing throughput, not the CPU or system memory.

# Measured FPS Breakdown

The full measured FPS dataset shows this combo cannot deliver smooth gameplay in Microsoft Flight Simulator at any resolution above 1080p Low. At 1920x1080 with Low settings, the average FPS is 39, which is marginally playable but far from ideal for a flight simulator where smooth camera panning matters. The Medium preset at 1080p drops to 30 FPS average, with minimums of 26 FPS and maximums of 35 FPS — this variance indicates frame pacing issues. The High preset at 1080p produces 23 FPS average, and the Ultra preset produces 22 FPS average, both well below smooth thresholds.

Moving to 2560x1440, the Low preset averages 31 FPS, which is still below what most users would consider acceptable. Medium at 1440p averages 24 FPS (minimum 21, maximum 28), High averages 18 FPS, and Ultra averages 17 FPS. These numbers confirm that 1440p is only marginally usable with the lowest settings, and even then, the frame rate hovers near the edge of playability.

At 3840x2160, the situation becomes dire. Low averages 23 FPS, Medium averages 18 FPS (minimum 15, maximum 21), High averages 14 FPS, and Ultra averages 13 FPS. None of these results are acceptable for sustained gameplay, and the minimum FPS of 15 at 4K Medium suggests stutter-heavy experiences during dense scenery or weather events. The data shows that 4K is effectively unplayable with this GPU in this simulator, regardless of settings.

The frame time consistency worsens with resolution. At 1080p Medium, the range between minimum and maximum is 9 FPS; at 1440p Medium, it expands to 7 FPS; at 4K Medium, it narrows to 6 FPS but from a much lower baseline. This pattern suggests that at higher resolutions, the GPU is consistently saturated rather than occasionally bottlenecked.

# FAQ

Q: Can this combo run Microsoft Flight Simulator at 1080p?

A: Yes, but only at Low settings, where it averages 39 FPS. The Medium preset drops to 30 FPS average, High to 23 FPS, and Ultra to 22 FPS, all below the 60 FPS target most users prefer.

Q: What is the best resolution for this hardware?

A: The data shows 1920x1080 with Low settings is the only configuration producing an average frame rate above 30 FPS (39 FPS). All other resolutions and settings combinations fall below that threshold.

Q: How does the GTX 1050 Ti compare to its nearest rivals?

A: The GPU's average benchmark score of 4193 places it 0.6% ahead of the AMD Radeon R5 M330 and 1% ahead of the NVIDIA Quadro K2100M, while trailing the NVIDIA Quadro K3000M by 1.1% and AMD Radeon Vega 3 by 1.8%. These are all similarly low-performing GPUs.

Q: Is the Intel Core i5-14600KF the bottleneck?

A: No. The CPU ranks in the 90th percentile versus all CPUs, with an average benchmark score of 49394. It scores 32544 in Cinebench R23 multi-core and 4594 in single-core, indicating it is far more capable than the GPU for gaming workloads.

Q: What frame rates can be expected at 4K with this combo?

A: The measured data shows 4K averages of 23 FPS (Low), 18 FPS (Medium), 14 FPS (High), and 13 FPS (Ultra). Even the best 4K setting falls well below playable thresholds.

Q: Does the GPU's VRAM affect performance in this game?

A: The 4 GB GDDR5 memory with 112.1 GB/s bandwidth is likely a limiting factor, evidenced by the sharp FPS drops when moving from 1080p to 1440p to 4K, where texture memory demands increase substantially.

# CPU Role

The Intel Core i5-14600KF is a high-end desktop processor that is completely wasted in this pairing for Microsoft Flight Simulator. With 14 cores and 20 threads based on the Raptor Lake architecture (10 nm process, 257 mm² die size), this CPU operates with a base clock of 3.50 GHz and a boost clock of 5.30 GHz. Its cache hierarchy includes 80 KB of L1 per core, 2 MB of L2 per core, and 24 MB of shared L3 cache. The CPU supports DDR4 and DDR5 memory in dual-channel configuration, has 16 PCIe Gen 5 lanes, and supports ECC memory.

The CPU's benchmark scores confirm its strength. In Cinebench R23, it scores 32544 multi-core and 4594 single-core; in Cinebench R20, 13668 multi-core and 1929 single-core; in Geekbench, 17085 multi-core and 2445 single-core. PassMark results show 38697 for multi-thread and 4273 for single-thread performance. The CPU's average benchmark score of 49394 places it 0.3% ahead of the AMD Ryzen 9 7900 and 0.4% ahead of the AMD Ryzen 7 PRO 5755G, while trailing the AMD Ryzen AI Max+ 388 by 0.8% and leading the Intel Core Ultra 5 245 by 0.8%.

In the context of Microsoft Flight Simulator, this CPU has ample headroom. The game's simulation and physics calculations benefit from the 5.30 GHz boost clock and the high single-thread performance (4594 in Cinebench R23 single-core). The 24 MB of shared L3 cache helps with the large data sets used in flight simulation. However, the GTX 1050 Ti cannot translate this CPU capability into frame rate. The measured FPS data shows that even at 1080p Low, where the CPU would have the most influence, the combo only achieves 39 FPS average — a number that reflects GPU limitations rather than CPU potential.

The CPU's 14 cores and 20 threads are far more than this game needs at the GPU's performance level, but they ensure that the processor is never the limiting factor, even when the simulator's complex flight models and weather systems are active. The 125 W TDP and unlocked multiplier indicate this is a performance-oriented chip, but in this configuration, its capabilities are entirely masked by the GPU. The data suggests that pairing this CPU with a more capable GPU would yield dramatically better results, as the processor's 90th percentile ranking versus all CPUs indicates it is not the constraint in this system.

Hardware Specifications

Intel Core i5-14600KF

Cores / Threads 14 / 20
Base Clock 3500 MHz
Boost Clock 5300 MHz
TDP 125W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce GTX 1050 Ti

VRAM 4 GB GDDR5
Base Clock —
Boost Clock 1392 MHz MHz
TDP 75 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-14600KF + NVIDIA GeForce GTX 1050 Ti in Microsoft Flight Simulator

Resolution Settings Avg FPS
3840x2160 Low 23.0
3840x2160 Medium 18.0
3840x2160 High 14.0
3840x2160 Ultra 13.0
2560x1440 Low 31.0
2560x1440 Medium 24.0
2560x1440 High 18.0
2560x1440 Ultra 17.0
1920x1080 Low 39.0
1920x1080 Medium 30.0
1920x1080 High 23.0
1920x1080 Ultra 22.0

Microsoft Flight Simulator with ii5-14600KF + Other GPUs

See how Microsoft Flight Simulator performs with the same CPU but different graphics cards.

Microsoft Flight Simulator with GTX 1050 Ti + Other CPUs

See how Microsoft Flight Simulator performs with the same GPU but different processors.

Other Games with ii5-14600KF + GTX 1050 Ti

Explore FPS benchmarks for other games using this same hardware combination.