Lockdown Protocol

# Lockdown Protocol with AMD Ryzen 9 5950X + NVIDIA GeForce RTX 5060

Lockdown Protocol, a 2024 FPS title, exhibits a clear and consistent performance scaling pattern with this AMD Ryzen 9 5950X and NVIDIA GeForce RTX 5060 pairing. The measured frame rates across the three primary resolutions — 1080p, 1440p, and 4K — reveal a system that transitions from a CPU-leaning state at lower resolutions to a GPU-bound configuration at 4K. The data shows that the RTX 5060, with its 8 GB GDDR7 memory and 128-bit bus, becomes the decisive factor as pixel count rises, while the 16-core, 32-thread Ryzen 9 5950X provides ample headroom at the lower end.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent across all settings, indicating a predictable scaling curve governed primarily by the GPU. At Low settings, the average frame rate falls from 197.8 FPS at 1920x1080 to 148.5 FPS at 2560x1440, then to 93.6 FPS at 3840x2160. That represents a 52.7% reduction from 1080p to 4K. The pattern is similar at High settings, where the average drops from 126.3 FPS at 1080p to 89 FPS at 1440p, and finally to 62.1 FPS at 4K — a 50.8% reduction overall. Medium settings show a comparable trajectory: 139.8 FPS at 1080p, 106 FPS at 1440p, and 67.6 FPS at 4K, a 51.6% decline. Ultra settings exhibit the most severe scaling, with 95.5 FPS at 1080p falling to 70.2 FPS at 1440p and 44.3 FPS at 4K, a 53.6% drop.

This consistent ~50% degradation moving from 1080p to 4K strongly suggests that the limiting component is the GPU. The Ryzen 9 5950X, with its 64 MB L3 cache and 3.40 GHz base clock boosting to 4.90 GHz, has more than enough compute headroom to feed the RTX 5060 at 1080p, where even Ultra settings exceed 95 FPS. The RTX 5060's 448.0 GB/s memory bandwidth and 19.18 TFLOPS FP32 performance are the constraining factors at 4K. The resolution scaling delta between Low and Ultra at each resolution is also telling: at 1080p, the gap between Low and Ultra is 102.3 FPS, while at 4K it narrows to 49.3 FPS. This compression at higher resolutions confirms that the GPU becomes the sole bottleneck, as pixel fill rate and memory bandwidth dominate the workload.

Settings Recommendations

The measured data indicates that High settings at 2560x1440 provide the most balanced experience for this combo. At 89 FPS average, it clears the 60 FPS threshold with a comfortable margin while still delivering a visual quality step above Medium. The 1440p High result represents a 27.4% reduction from the 1080p High figure, but the absolute frame rate remains smooth for a competitive FPS title. For players prioritizing maximum frame rates, 1080p Low delivers 197.8 FPS, which is ideal for high-refresh-rate displays, though it sacrifices visual fidelity.

At 4K, the data suggests that High settings (62.1 FPS) are the practical ceiling for maintaining playable performance, while Ultra (44.3 FPS) falls below the 60 FPS target. Medium at 4K (67.6 FPS) is a viable alternative if High proves too demanding in scenes not captured by the average. The 1440p Medium result of 106 FPS offers a robust middle ground for those who want both high resolution and high refresh, sacrificing only 17 FPS compared to Low at the same resolution. For competitive play, 1080p Medium at 139.8 FPS is recommended over Low, as the 58 FPS difference between Medium and Low is substantial but the visual uplift from Medium is often worth the trade-off.

FAQ

Q: What is the best resolution for this CPU-GPU combo in Lockdown Protocol?

A: The data shows 2560x1440 at High settings (89 FPS) as the sweet spot, balancing visual quality and performance. At 4K, High settings (62.1 FPS) are playable but leave little headroom.

Q: Why does performance drop so significantly from 1080p to 4K?

A: The average FPS drops by roughly 50% across all settings when moving from 1920x1080 to 3840x2160. This indicates the NVIDIA GeForce RTX 5060 becomes the primary bottleneck at higher resolutions, as its 8 GB GDDR7 memory and 128-bit bus are saturated by the increased pixel workload.

Q: How does the RTX 5060 compare to its nearest rival in this context?

A: According to the benchmark data, the RTX 5060's average score of 30109 is nearly identical to the AMD Radeon RX 7700 XT (30097, 0% delta) and slightly below the AMD Radeon RX 570 (30158, -0.2% delta). This places it in a tight competitive cluster.

Q: Is the Ryzen 9 5950X holding back the RTX 5060 at 1080p?

A: No. At 1920x1080, even Ultra settings achieve 95.5 FPS, and Low reaches 197.8 FPS. The CPU's 3dmark_max_threads score of 11597 and cinebench_r23_multicore score of 38607 suggest it has ample processing power to keep the GPU fed at lower resolutions.

Q: What settings should be avoided for a smooth 4K experience?

A: Ultra settings at 3840x2160 produce an average of 44.3 FPS, which is below the 60 FPS target. Medium (67.6 FPS) and High (62.1 FPS) are the only viable 4K presets according to the measured data.

Q: How does this combo rank among all tested configurations in Lockdown Protocol?

A: The combo ranks 802nd out of 1637 tested combinations, placing it in the 49th percentile. This mid-pack positioning reflects the balanced but not class-leading performance of the Ryzen 9 5950X and RTX 5060 pairing.

Measured FPS Breakdown

At 1920x1080, the full settings sweep shows a clear hierarchy. Low settings deliver the highest average at 197.8 FPS, followed by Medium at 139.8 FPS, High at 126.3 FPS, and Ultra at 95.5 FPS. The gap between Low and Ultra is 102.3 FPS, representing a 51.7% performance penalty for maxing out visual quality. The step from Medium to High is modest (13.5 FPS difference), while the jump from High to Ultra is larger (30.8 FPS difference), suggesting that Ultra introduces disproportionately heavy effects.

At 2560x1440, the same ordering holds but with compressed margins. Low averages 148.5 FPS, Medium 106 FPS, High 89 FPS, and Ultra 70.2 FPS. The total spread between Low and Ultra narrows to 78.3 FPS. Notably, the 1440p High result (89 FPS) is nearly identical to the 1080p Ultra result (95.5 FPS), indicating that moving up in resolution costs roughly the same performance as moving up one or two quality tiers.

At 3840x2160, the performance envelope tightens further. Low averages 93.6 FPS, Medium 67.6 FPS, High 62.1 FPS, and Ultra 44.3 FPS. The spread between Low and Ultra is 49.3 FPS. This 4K data shows that even Low settings cannot reach 100 FPS, confirming that the RTX 5060's memory bandwidth of 448.0 GB/s and pixel rate of 119.9 GPixel/s are the definitive limiting factors. The 4K Low result (93.6 FPS) is actually lower than the 1080p Ultra result (95.5 FPS), which underscores how resolution scaling outpaces settings scaling for this GPU.

How This Combo Ranks

The combo's rank of 802 out of 1637 tested configurations places it just below the median, which is consistent with its component-level benchmark positions. The Ryzen 9 5950X sits at the 93rd percentile among all CPUs, while the RTX 5060 is at the 73rd percentile among all GPUs. The CPU's nearest rivals — the Intel Core i5-14600K (delta -0.2%), Intel Core i5-14600KF (delta -0.6%), Intel Xeon Gold 5318H (delta 0.7%), and AMD EPYC 4345P (delta -1.1%) — all score within 1.1% of the Ryzen 9 5950X's average benchmark score of 49062. This indicates that the CPU is performing as expected for its class.

The GPU's nearest rivals show a similar clustering: the AMD Radeon RX 7700 XT (delta 0%), AMD Radeon RX 570 (delta -0.2%), NVIDIA Tesla M60 (delta 0.5%), and NVIDIA GeForce RTX 5070 Mobile (delta 0.6%) all fall within 0.6% of the RTX 5060's average score of 30109. The mid-pack ranking in Lockdown Protocol specifically suggests that this game is more demanding than average on the GPU, pulling the combo's standing down from what the CPU's 93rd percentile might imply. The measured FPS data confirms this: at 4K Ultra, the combo only achieves 44.3 FPS, which is below the playability threshold for many users, while at 1080p Low it reaches 197.8 FPS, showing the system's true potential when the GPU is not the primary constraint.