Lockdown Protocol

# Lockdown Protocol with AMD Ryzen 7 5800X + NVIDIA GeForce RTX 3050 4 GB

The AMD Ryzen 7 5800X paired with the NVIDIA GeForce RTX 3050 4 GB produces a performance profile that is heavily skewed by resolution and settings in Lockdown Protocol. The measured data shows this combo ranks 1481 out of 1637 tested combinations, placing it in the lower percentile of systems. This is not a high-end pairing, but the benchmark results reveal interesting scaling behavior that tells a clear story about which component becomes the limiting factor as graphical load increases. The RTX 3050 4 GB sits at the 50th percentile among all GPUs, while the Ryzen 7 5800X ranks at the 84th percentile among all CPUs — a mismatch that becomes increasingly apparent as resolution climbs.

Resolution Scaling

The FPS drop from 1080p to 4K is dramatic and consistent across all settings presets, indicating that the GPU is the primary bottleneck at higher resolutions. At Low settings, the average frame rate falls from 111.9 FPS at 1920x1080 to 83.2 FPS at 2560x1440 — a reduction of roughly 26% — and then to 53.4 FPS at 3840x2160, which represents a further 36% drop from the 1440p figure. This steep decline suggests that pixel throughput becomes the dominant constraint as resolution increases.

The scaling pattern at High settings is similarly steep: 72.5 FPS at 1080p, 53.5 FPS at 1440p, and 32.7 FPS at 4K. The drop from 1080p to 1440p is about 19 FPS, while the drop from 1440p to 4K is about 21 FPS. This nearly linear degradation points to the RTX 3050 4 GB's limited memory bandwidth of 192.0 GB/s and its 128-bit bus width being insufficient for the higher pixel counts.

At Ultra settings, the situation is more severe. The 4K result of 23.2 FPS is barely playable, and even 1440p only manages 37.2 FPS. The 1080p Ultra result of 50.7 FPS is the only resolution where this preset approaches a smooth experience. The data suggests that the RTX 3050 4 GB is designed for 1080p gaming, and pushing it beyond that resolution requires significant settings reductions.

The gap between Low and Ultra settings widens as resolution increases. At 1080p, the difference between Low and Ultra is 61.2 FPS (111.9 vs 50.7). At 4K, the difference shrinks to 30.2 FPS (53.4 vs 23.2). This compression at higher resolutions indicates that the GPU is so heavily pixel-bound that settings changes have less impact on absolute frame rates.

CPU Role

The AMD Ryzen 7 5800X brings substantial processing power to this pairing, with 8 cores and 16 threads running on the Zen 3 architecture. Its boost clock of 4.70 GHz and base clock of 3.80 GHz provide strong single-threaded performance, as evidenced by a 3dmark_single_thread score of 943 and a passmark_single_thread score of 3445. In Lockdown Protocol, an FPS title, single-thread performance often matters more than raw core counts.

The CPU's multi-threaded capabilities are also impressive, with a cinebench_r23_multicore score of 23571 and a passmark_multithread score of 27732. However, the benchmark data from this game suggests that the CPU is not the limiting factor at any resolution tested. At 1080p Low, the system achieves 111.9 FPS, which is a solid result that indicates the CPU can feed the GPU adequately at lower resolutions.

The Ryzen 7 5800X's nearest rivals in overall CPU benchmarks include the AMD Ryzen 7 5800 with a delta of 0.3%, the AMD Ryzen 5 8500GE at -0.4%, the Intel Core i7-13700H at -0.4%, and the Intel Core i5-12600KF at -0.8%. These are all closely matched scores, suggesting that the 5800X is a mid-pack performer relative to its contemporaries. The 32 MB of L3 cache is notable for gaming workloads, as it helps reduce memory latency.

The CPU's memory bandwidth of 51.2 GB/s via dual-channel DDR4 is modest by modern standards, but it does not appear to create a bottleneck in this game's measured results. The fact that FPS scales so dramatically with resolution and settings indicates that the GPU is the primary constraint, not the CPU or memory subsystem.

FAQ

Q: Can this combo run Lockdown Protocol at 4K?

A: Yes, but only at Low settings with an average of 53.4 FPS. At Medium settings, the 4K average drops to 38.7 FPS, and at High it falls to 32.7 FPS. Ultra settings at 4K produce just 23.2 FPS, which is likely too low for smooth gameplay.

Q: What is the best resolution for this pairing?

A: The data indicates that 1920x1080 provides the most usable frame rates across all settings. At Low settings, the system achieves 111.9 FPS, and even at Ultra it manages 50.7 FPS. At 2560x1440, only Low settings (83.2 FPS) and Medium settings (60.8 FPS) deliver consistently smooth results.

Q: How does the RTX 3050 4 GB compare to other GPUs?

A: The GPU ranks at the 50th percentile among all GPUs, placing it exactly in the middle of the performance distribution. Its 4 GB of GDDR6 memory and 192.0 GB/s bandwidth are relatively limited for modern titles, which explains the significant FPS drops at higher resolutions.

Q: Is the Ryzen 7 5800X holding back the RTX 3050?

A: The benchmark data suggests it is not. The CPU's 84th percentile ranking among all CPUs and strong single-threaded scores mean it can keep up with the GPU at 1080p. The FPS drops at higher resolutions are more consistent with GPU limitations than CPU bottlenecks.

Q: What settings preset gives the highest FPS at 1080p?

A: Low settings produce the highest average at 111.9 FPS, followed by Medium at 81.5 FPS, High at 72.5 FPS, and Ultra at 50.7 FPS. The choice depends on whether the user prioritizes frame rate or visual quality.

Q: Does the combo rank well among tested systems?

A: This combo ranks 1481 out of 1637 tested combinations, placing it in the lower portion of the field. This rank reflects the GPU's mid-tier positioning rather than the CPU's stronger performance.

Measured FPS Breakdown

At 1920x1080, the measured results show a clear hierarchy across settings. Low settings deliver the highest average at 111.9 FPS, which is a very smooth experience for an FPS title. Medium settings produce 81.5 FPS, still comfortably above 60 FPS. High settings yield 72.5 FPS, maintaining playability. Ultra settings drop to 50.7 FPS, which dips below the 60 FPS threshold that many players consider ideal for competitive shooters.

Moving to 2560x1440, the performance degrades noticeably. Low settings average 83.2 FPS, which remains solid. Medium settings hit 60.8 FPS, just barely clearing the 60 FPS mark. High settings fall to 53.5 FPS, and Ultra drops to 37.2 FPS. These numbers indicate that 1440p requires careful settings management to maintain smooth gameplay.

At 3840x2160, the results become marginal. Low settings average 53.4 FPS, which is playable but not ideal. Medium settings produce 38.7 FPS, High settings yield 32.7 FPS, and Ultra settings drop to 23.2 FPS. None of the 4K results reach 60 FPS, and only Low settings approach a playable frame rate.

The pattern across all resolutions is consistent: Low settings provide roughly 2.1 to 2.2 times the FPS of Ultra settings. This ratio remains stable regardless of resolution, indicating that the GPU's rendering load scales proportionally with settings changes.

GPU Role

The NVIDIA GeForce RTX 3050 4 GB is built on the Ampere architecture with a GA107 chip manufactured on Samsung's 8 nm process. Its boost clock of 1740 MHz and base clock of 1545 MHz are modest, and the 4 GB GDDR6 memory with a 128-bit bus provides 192.0 GB/s of bandwidth. These specifications explain why the GPU struggles at higher resolutions — the memory interface is simply too narrow to feed enough data to the shading units.

The GPU features 2048 shading units, 64 TMUs, and 32 ROPs, with 16 RT cores and 64 tensor cores. Its FP32 performance of 7.127 TFLOPS is respectable for a mid-range card, but the 4 GB memory capacity limits its ability to handle high-resolution textures and complex scenes. The pixel rate of 55.68 GPixel/s and texture rate of 111.4 GTexel/s are adequate for 1080p but insufficient for 4K.

The 90 W TDP and 250 W suggested PSU indicate this is a low-power card, which aligns with its modest performance profile. The PCIe 4.0 x8 interface provides sufficient bandwidth for the GPU's needs, but the 4 GB memory becomes a hard constraint in demanding scenarios.

The measured FPS data supports the conclusion that the GPU is the primary bottleneck in this pairing. The significant FPS drops as resolution increases — from 111.9 at 1080p Low to 53.4 at 4K Low — are characteristic of a GPU that runs out of memory bandwidth and pixel throughput. The CPU, by contrast, maintains sufficient performance to avoid becoming the limiting factor.

Settings Recommendations

Based on the measured data, the optimal settings for this combo depend heavily on the target resolution. At 1920x1080, the Low preset delivers 111.9 FPS, which is ideal for competitive play where high frame rates are crucial. For players who prefer better visual quality, the Medium preset at 81.5 FPS offers a strong balance, while High at 72.5 FPS remains playable. The Ultra preset at 50.7 FPS sacrifices too much frame rate for marginal visual gains.

At 2560x1440, the Low preset at 83.2 FPS is the only setting that provides a comfortable margin above 60 FPS. The Medium preset at 60.8 FPS is borderline, and players with lower sensitivity to frame rate fluctuations might find it acceptable. The High preset at 53.5 FPS and Ultra at 37.2 FPS are not recommended for this resolution.

At 3840x2160, only the Low preset at 53.4 FPS is worth considering, and even that is marginal. The Medium preset at 38.7 FPS, High at 32.7 FPS, and Ultra at 23.2 FPS are all too slow for a responsive FPS experience. For 4K gaming, this combo would require significant compromises.

The data suggests that the best overall experience is achieved at 1080p with Medium or High settings, striking a balance between visual fidelity and frame rate. The Medium preset's 81.5 FPS is 10.9 FPS higher than High's 72.5 FPS, making it the better choice for players who prioritize smoothness.

How This Combo Ranks

This combination of AMD Ryzen 7 5800X and NVIDIA GeForce RTX 3050 4 GB ranks 1481 out of 1637 tested combos in Lockdown Protocol. This places it in the bottom 9.5% of all tested systems, which reflects the GPU's limitations rather than any deficiency in the CPU. The Ryzen 7 5800X is a strong processor that ranks in the 84th percentile among all CPUs, but the RTX 3050 4 GB's mid-tier positioning drags down the overall ranking.

The rank suggests that most other tested combos deliver higher frame rates in this game. The GPU's 50th percentile ranking among all GPUs indicates that half of all GPUs are faster, which directly impacts the combo's standing. The CPU's close performance to rivals like the AMD Ryzen 7 5800 (0.3% delta) and AMD Ryzen 5 8500GE (-0.4% delta) means that swapping the CPU would not significantly change the outcome.

The 1481 rank is a clear signal that this combo is not designed for high-end gaming performance in Lockdown Protocol. It is better suited for 1080p gaming at medium settings, where it can deliver playable frame rates. The data shows that the GPU is the limiting factor across all resolutions and settings, and any upgrade path would need to focus on replacing the RTX 3050 4 GB rather than the Ryzen 7 5800X.