Lockdown Protocol

The AMD Ryzen 7 5700X and NVIDIA GeForce RTX 3050 4 GB pairing in Lockdown Protocol delivers a playable but heavily GPU-bound experience. The data shows a combo ranking in the 1478th position out of 1637 tested combinations, placing it in the lower tier of systems. This analysis breaks down how each component contributes to the measured results and what you can expect across resolutions and settings.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 7 5700X is a Zen 3 (Vermeer) part built on TSMC's 7 nm process, featuring 8 cores and 16 threads. Its base clock runs at 3.40 GHz with a boost up to 4.60 GHz, and it carries a 65 W TDP. The processor accesses 32 MB of shared L3 cache, along with 64 KB of L1 and 512 KB of L2 per core. Memory support includes dual-channel DDR4 with a theoretical bandwidth of 51.2 GB/s, and it connects via PCIe Gen 4 with 20 lanes from the CPU.

In synthetic benchmarks, the 5700X posts a Cinebench R23 multi-core score of 22620 and a single-core score of 3193. Its 3DMark results show a 16-thread score of 6858, which drops to 1821 for 2-thread workloads, indicating strong scaling across its cores. The processor sits at the 83rd percentile against all CPUs, with an average benchmark score of 26214. Its nearest rivals include the Intel Core i9-11900KF (average score 26196, delta 0.1%), the AMD Ryzen 7 PRO 6850U (26262, delta -0.2%), the AMD Ryzen 5 5500GT (26161, delta 0.2%), and the AMD Ryzen 5 7600X (26272, delta -0.2%). These deltas are all within a fraction of a percent, meaning the 5700X offers essentially identical CPU throughput to those alternatives.

For Lockdown Protocol, an FPS title, the CPU's 8-core/16-thread configuration provides ample headroom for game logic and physics. The measured FPS data, however, shows that the processor is not the limiting factor here. At 1080p Low settings, the combo achieves 112.2 FPS, but even at 4K Ultra it drops to 24.2 FPS. The scaling pattern across resolutions points to the GPU as the bottleneck, since the CPU's strong multithreaded performance would easily sustain higher frame rates if the graphics card could deliver them. The 5700X's single-thread score of 921 in 3DMark and 3385 in PassMark single-thread tests further confirm it has enough per-core strength for typical FPS workloads without holding back the RTX 3050.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 3050 4 GB is an Ampere architecture part based on the GA107 chip, manufactured on Samsung's 8 nm process. It operates with a base clock of 1545 MHz and a boost clock of 1740 MHz, while the memory runs at 1500 MHz with 12 Gbps effective speed. The card features 2048 shading units, 64 TMUs, and 32 ROPs, along with 16 RT cores and 64 tensor cores. Its 4 GB of GDDR6 memory sits on a 128-bit bus, yielding a bandwidth of 192.0 GB/s. The GPU's FP32 throughput is 7.127 TFLOPS, and its pixel rate is 55.68 GPixel/s with a texture rate of 111.4 GTexel/s.

The 4 GB VRAM capacity is the critical constraint in this title. At 1080p, the card manages 112.2 FPS on Low settings, but that falls to 54.3 FPS on Ultra. Going to 1440p drops the Low setting to 82.9 FPS and Ultra to 38.5 FPS. At 4K, the card struggles even at Low, hitting 55.2 FPS, and Ultra falls to just 24.2 FPS. The 4 GB frame buffer likely fills up quickly at higher resolutions and settings, causing the steep performance penalties. The GPU sits at the 50th percentile against all GPUs, which aligns with its mid-range positioning, and its 90 W TDP is modest for a discrete card.

The RTX 3050's boost clock of 1740 MHz is relatively modest, but the bigger issue is the VRAM ceiling. In a fast-paced FPS like Lockdown Protocol, texture quality and resolution directly impact frame rates, and the data shows how quickly performance degrades as demand on the 4 GB buffer increases. The card's 192.0 GB/s bandwidth also becomes a limiting factor at 4K, where memory throughput requirements outpace what the 128-bit bus can provide.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data reveals a clear pattern of GPU-bound scaling. At 1080p Low, the combo delivers 112.2 FPS. Moving to 1440p Low drops that to 82.9 FPS, a reduction of about 26%. At 4K Low, the frame rate falls to 55.2 FPS, which is roughly 51% lower than the 1080p result. This consistent drop as resolution increases indicates that the GPU is the primary constraint, since a CPU-bound scenario would show much smaller changes across resolutions.

At High settings, the same scaling appears: 69.9 FPS at 1080p, 49 FPS at 1440p, and 34.9 FPS at 4K. The percentage drops are similar, reinforcing that the RTX 3050's compute and memory resources are saturated. The gap between Low and High settings at the same resolution also shows the GPU's limits. At 1080p, Low hits 112.2 FPS while High gets 69.9 FPS, a 37.7% difference. At 4K, Low gets 55.2 FPS and High gets 34.9 FPS, a 36.8% difference. This consistency suggests the GPU's shading units and memory bandwidth are the limiting factors, not the CPU.

The CPU's role is to feed the GPU with draw calls and game state updates. With 8 cores and 16 threads, the 5700X is more than capable of handling Lockdown Protocol's demands at any of these resolution and settings combinations. The data shows that the frame rate scales almost entirely with GPU workload, meaning the processor is not holding back performance. If the CPU were the bottleneck, you would see smaller FPS differences between 1080p and 4K, but the measured values show steep declines, confirming the GPU as the limiting component.

How This Combo Ranks — use comboRankInGame vs other tested combos

The AMD Ryzen 7 5700X and NVIDIA GeForce RTX 3050 4 GB combination ranks 1478th out of 1637 tested combos in Lockdown Protocol. This places it in the bottom 10% of all systems tested, which is a poor showing for a gaming-focused pairing. The data indicates that this combo struggles to maintain high frame rates at demanding settings, and the rank reflects that reality.

The low ranking is primarily due to the GPU's 4 GB VRAM limitation and modest compute power. While the CPU is competitive with its nearest rivals — the Intel Core i9-11900KF, AMD Ryzen 7 PRO 6850U, AMD Ryzen 5 5500GT, and AMD Ryzen 5 7600X all score within 0.2% of the 5700X — the graphics card drags the overall combo down. The RTX 3050's 50th percentile standing among all GPUs means half of all tested graphics cards outperform it, and in a game like Lockdown Protocol that relies heavily on GPU throughput, this results in a bottom-tier ranking.

The 1478th position out of 1637 combos means there are only 159 tested systems that perform worse. This is not a configuration you would choose for high-refresh-rate gaming at 1440p or 4K. The combo's strength lies in 1080p play, where it can hit 112.2 FPS on Low settings, but even there, the Ultra preset drops to 54.3 FPS, which is below the 60 FPS threshold many players consider acceptable for a competitive FPS. The ranking accurately reflects that this is a budget-oriented pairing with significant compromises at higher settings.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured FPS data covers three resolutions and four settings levels, providing a full picture of the combo's performance envelope.

At 1920x1080, the combo achieves 112.2 FPS on Low settings, 80.2 FPS on Medium, 69.9 FPS on High, and 54.3 FPS on Ultra. The jump from Low to Medium costs 32 FPS, while Medium to High costs 10.3 FPS, and High to Ultra costs 15.6 FPS. This shows that the GPU handles 1080p well at lower settings, but Ultra settings push the 4 GB VRAM to its limit.

At 2560x1440, the results drop to 82.9 FPS on Low, 60.1 FPS on Medium, 49 FPS on High, and 38.5 FPS on Ultra. The Low setting still provides playable frame rates, but Medium dips to just above 60 FPS, and High and Ultra fall below that threshold. The 1440p results show a 27% average reduction from 1080p across all settings.

At 3840x2160, the combo manages 55.2 FPS on Low, 41 FPS on Medium, 34.9 FPS on High, and 24.2 FPS on Ultra. These numbers are mostly below playable levels for a fast-paced FPS. Even Low settings at 4K only reach 55.2 FPS, which is borderline, and Ultra at 24.2 FPS is effectively unplayable for competitive play. The 4K results highlight the GPU's memory bandwidth and capacity limitations, as the 192.0 GB/s bandwidth cannot keep up with 4K rendering demands.

The data shows a clear trend: the combo is best suited for 1080p gaming at Low to Medium settings, can handle 1440p at Low settings, and struggles at 4K regardless of settings. For Lockdown Protocol, players should prioritize resolution over settings to maintain acceptable frame rates.

FAQ

Q: What is the best resolution and settings combination for this combo in Lockdown Protocol?

A: The data shows 1080p Low delivers 112.2 FPS, which is the highest measured frame rate. For a balance of quality and performance, 1080p Medium at 80.2 FPS is the most practical choice, as 1440p Medium drops to 60.1 FPS and 4K Medium falls to 41 FPS.

Q: Can this combo handle 4K gaming in Lockdown Protocol?

A: At 4K, the best result is 55.2 FPS on Low settings, but Medium drops to 41 FPS, High to 34.9 FPS, and Ultra to 24.2 FPS. These numbers indicate 4K is only playable at Low settings, and even then, the frame rate is below what most FPS players would consider smooth.

Q: Is the CPU or GPU the limiting factor in this pairing?

A: The GPU is the clear bottleneck. The CPU's nearest rivals all score within 0.2% of the 5700X on average, and the frame rates drop significantly with resolution increases, which is characteristic of GPU-bound scenarios. The CPU's 8-core/16-thread design provides ample headroom for the game's demands.

Q: How does this combo rank compared to other tested systems?

A: This combo ranks 1478th out of 1637 tested combinations in Lockdown Protocol. This places it in the bottom 10% of all tested systems, reflecting the GPU's 4 GB VRAM limitation and mid-range compute performance.

Q: What is the difference between Low and Ultra settings at 1080p?

A: At 1080p, Low settings achieve 112.2 FPS while Ultra drops to 54.3 FPS. This is a 57.9 FPS difference, or about a 51.6% reduction in frame rate, showing that Ultra settings heavily tax the GPU's resources.

Q: Does the combo's performance degrade uniformly across resolutions?

A: The data shows consistent percentage drops. From 1080p to 1440p, Low settings drop from 112.2 to 82.9 FPS (26.1% reduction), and from 1440p to 4K, it drops to 55.2 FPS (33.4% reduction). This uniform scaling confirms the GPU is the limiting component across all resolution steps.