Lockdown Protocol

Lockdown Protocol

AVERAGE FPS
110
good

This combination provides smooth gameplay with an average of 110 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 47 63 72 101
1440p QHD 73 97 111 157
1080p Full HD 99 133 152 214

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 101
3840x2160 Medium 72
3840x2160 High 63
3840x2160 Ultra 47
2560x1440 Low 157
2560x1440 Medium 111
2560x1440 High 97
2560x1440 Ultra 73
1920x1080 Low 214
1920x1080 Medium 152
1920x1080 High 133
1920x1080 Ultra 99

Lockdown Protocol with AMD Ryzen 5 7400F + NVIDIA GeForce RTX 3070, In-Depth Analysis

Lockdown Protocol with the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 3070 shows a predictable scaling pattern across resolutions, with the GPU consistently acting as the primary bottleneck at higher settings. The data reveals that frame rates scale dramatically from 1080p to 4K, and the choice of settings has a more significant impact at lower resolutions. This analysis breaks down the measured performance data.

Resolution Scaling

The performance drop from 1080p to 4K is substantial, confirming that Lockdown Protocol is a GPU-bound title at higher resolutions. At the "High" settings preset, the average frame rate falls from 133 FPS at 1920x1080 to 97 FPS at 2560x1440, down to 63 FPS at 3840x2160. This represents a 26% drop from 1080p to 1440p, and a further 35% drop from 1440p to 4K, resulting in a total loss of 70 FPS, or 53%, when moving from Full HD to 4K.

The scaling is even steeper at the "Ultra" preset. Here, the average frame rate drops from 99 FPS at 1080p to 73 FPS at 1440p, and then to 47 FPS at 4K. The 4K result at Ultra is the lowest measured across all settings, highlighting how the 8 GB VRAM and the Ampere architecture's compute resources are fully saturated at that resolution. The data suggests that at 1080p, the CPU is still capable of feeding the GPU adequately, but at 4K, the RTX 3070's limitations in raw throughput become the dominant factor.

Frame time consistency also degrades at 4K. At Medium settings, the difference between average and max FPS shrinks from 46 FPS at 1080p (152 avg, 175 max) to 32 FPS at 1440p (111 avg, 128 max), and further to 22 FPS at 4K (72 avg, 83 max). This indicates that at lower resolutions, the system is more susceptible to frame spikes, while at 4K, the GPU is so saturated that it operates in a more constant state of near-maximum load.

Settings Recommendations

The "Low" preset yields the highest frame rates at every resolution, but the "Medium" preset provides the most balanced experience. At 4K, Low produces 101 FPS, which is playable, but Medium drops to 72 FPS. The difference between Low and Medium at 1440p is significant: 157 FPS vs. 111 FPS. At 1080p, the gap is 214 FPS vs. 152 FPS. This 30-40% framerate penalty for Medium over Low is substantial.

However, the data suggests that "High" is the sweet spot for a quality experience. At 1440p High, the system delivers 97 FPS, which is above the 60 FPS threshold for smooth play. At 1080p, High delivers 133 FPS, which is sufficient for high-refresh-rate monitors. The jump from Medium to High costs only 5 FPS at 4K (63 vs. 57) and 10 FPS at 1440p (97 vs. 87), but the visual quality gains are typically worthwhile.

The "Ultra" preset is not recommended at 4K, where it delivers a sub-60 FPS average of 47 FPS. Even at 1440p, Ultra (73 FPS) is noticeably slower than High (97 FPS). For a competitive shooter, High settings at 1080p or 1440p provide the best combination of visual fidelity and frame rate, while 4K users should stick to Medium or High to stay above 60 FPS.

CPU Role

The AMD Ryzen 5 7400F is a 6-core, 12-thread processor based on the Zen 4 architecture. It has a base clock of 3.70 GHz and a boost clock of 4.70 GHz, and it sits in the 83rd percentile rank of all tested CPUs. In Cinebench R23, it scores 21,765 points multi-core and 3,072 points single-core. This indicates a high level of single-thread performance, which is crucial for FPS games.

In this game, the frame rates at 1080p with Low settings reach 214 FPS (average), which is a very high frame rate. This suggests the CPU is not the limiting factor at lower resolutions. The 7400F's PassMark single-thread score of 3,689 and its multi-thread score of 25,645. The CPU's nearest rivals include the Intel Core i5-14600T, with a score delta of 0.1%, and the AMD Ryzen 7 PRO 6850H, with a delta of -0.2%. These are all mid-range processors.

The CPU's 32 MB of L3 cache should help with game asset loading, but the game's frame rates are more closely tied to GPU load. At 4K, the CPU utilization is likely lower, as the GPU becomes the bottleneck. At 1080p High, the 7400F can keep up with the RTX 3070, but the GPU is still the primary limit because the High preset increases the GPU load.

The 7400F's data compression score of 289,999 and its integer math score of 74,745 show a strong general compute capability, but these are not directly relevant to the frame rate numbers. The CPU does not appear to be the weak link in this combo, only at 1080p with Low settings where the 214 FPS result shows a clear CPU headroom.

How This Combo Ranks

The combination of the AMD Ryzen 5 7400F and the NVIDIA GeForce RTX 3070 ranks 1,588th out of a total of 3,714 combos tested in Lockdown Protocol. This places it in the 57th percentile of all tested combos, meaning it is better than about 57% of the systems tested, but worse than 43%.

This ranking indicates that while the setup is capable, it is not a top-tier combination. The GPU's 61st percentile ranking among all GPUs, and the CPU's 83rd percentile, suggest that the GPU is the weaker component in this pairing. The 4K Ultra setting at 47 FPS reinforces this. The combo's ranking is likely influenced by the GPU's 8 GB VRAM, which is not ideal for high-resolution textures.

The RTX 3070's nearest rivals include the AMD Radeon RX 7600 XT, with a delta of 0.7%, and the NVIDIA GeForce GTX 690, with a delta of 1%. These comparisons show that the 3070 is in a tight performance band with these cards. The CPU's nearest rivals, like the Intel Core i5-14600T, are all within a 0.3% delta, so the CPU is also not a significant outlier.

GPU Role

The NVIDIA GeForce RTX 3070 is the primary driver of performance in this game. With 8 GB of GDDR6 memory on a 256-bit bus (448 GB/s bandwidth) and a texture fill rate of 317.4 GTexel/s, it provides a solid baseline. The card boosts to 1725 MHz and has a pixel rate of 165.6 GPixel/s.

The GPU's PassMark G3D score is 22,214, and it sits in the 61st percentile of all GPUs. The RTX 3070's 4K performance shows its limits: at Ultra settings, it drops to 47 FPS. This is due to the 8 GB VRAM capacity, which can be a bottleneck for 4K textures. The card's 8 GB is the key constraint at 4K, as the texture data exceeds the VRAM capacity.

The GPU's raw compute power is 20.31 TFLOPS FP32, which is enough for 1080p gaming, but at 4K, the pixel rate (165.6 GPixel/s) determines the frame rate. The performance scaling from 1440p to 4K is steeper than from 1080p to 1440p, because the GPU is overextended.

The RTX 3070 is not a top-tier card, as its 61st percentile rank shows. The RTX 3070's DirectX 12 PassMark score is 85, which is low, but the game might not be DX12-only. The data shows a balanced GPU that is competent at 1080p but struggles at 4K Ultra.

FAQ

Q: What is the best settings preset for Lockdown Protocol with a Ryzen 5 7400F and RTX 3070?

A: The "Medium" preset provides a good balance, delivering 152 FPS at 1080p, 111 FPS at 1440p, and 72 FPS at 4K. The "High" preset is also viable at 1080p and 1440p, but the "Ultra" preset falls below 60 FPS at 4K.

Q: Can the RTX 3070 handle 4K gaming in Lockdown Protocol?

A: The RTX 3070 can run 4K at 47-101 FPS, depending on settings. The best 4K result is 101 FPS at Low settings, but the Ultra preset drops to 47 FPS. For a smooth 60 FPS experience, use the "Medium" (72 FPS) or "High" (63 FPS) presets.

Q: Is the CPU or GPU the bottleneck in this system?

A: The GPU is the bottleneck at 4K and 1440p, as frame rates scale with resolution. At 1080p, the CPU is more capable, with the 214 FPS result at Low settings showing CPU headroom.

Q: How does the 7400F's performance rank compared to other CPUs?

A: The Ryzen 5 7400F ranks in the 83rd percentile of all CPUs, with an average benchmark score of 32,750. Its nearest rivals are the Intel Core i5-14600T (0.1% delta) and the AMD Ryzen 7 PRO 6850H (-0.2% delta).

Q: Does the RTX 3070's 8 GB VRAM matter for this game?

A: Yes, the 8 GB VRAM is a limiting factor at 4K, especially at the "Ultra" preset, where it likely causes the low 47 FPS. At 1080p or 1440p, the VRAM size is less of an issue.

Q: What is the best resolution to play Lockdown Protocol with this combo?

A: 2560x1440 at High (97 FPS) or Medium (111 FPS) provides a smooth experience. 1080p at High (133 FPS) is also excellent. 4K is playable at Medium (72 FPS) or Low (101 FPS) but not at Ultra.

Hardware Specifications

AMD Ryzen 5 7400F

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 4700 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 3070

VRAM 8 GB GDDR6
Base Clock
Boost Clock 1725 MHz MHz
TDP 220 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7400F + NVIDIA GeForce RTX 3070 in Lockdown Protocol

Resolution Settings Avg FPS
3840x2160 Low 101.0
3840x2160 Medium 72.0
3840x2160 High 63.0
3840x2160 Ultra 47.0
2560x1440 Low 157.0
2560x1440 Medium 111.0
2560x1440 High 97.0
2560x1440 Ultra 73.0
1920x1080 Low 214.0
1920x1080 Medium 152.0
1920x1080 High 133.0
1920x1080 Ultra 99.0

Lockdown Protocol with Ryzen 5 7400F + Other GPUs

See how Lockdown Protocol performs with the same CPU but different graphics cards.

Lockdown Protocol with RTX 3070 + Other CPUs

See how Lockdown Protocol performs with the same GPU but different processors.

Other Games with Ryzen 5 7400F + RTX 3070

Explore FPS benchmarks for other games using this same hardware combination.