Barony

The AMD Ryzen 5 7400F and NVIDIA GeForce RTX 3070 combination delivers a robust performance profile in Barony, a roguelike title where frame pacing and responsiveness are critical. The data shows a system that excels at high refresh rates at 1080p and 1440p, while still maintaining playable performance at 4K. This analysis breaks down the measured FPS results to clarify the role of each component and provides actionable settings guidance based on the benchmark data.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 7400F is a 6-core, 12-thread processor based on the Zen 4 architecture, built on TSMC's 5 nm process. It operates with a base clock of 3.70 GHz and a boost clock of 4.70 GHz. For a roguelike like Barony, which typically involves procedural world generation and complex simulation logic, the CPU's single-thread performance and multi-thread capabilities are both relevant. The processor's 32 MB of shared L3 cache provides a sizeable pool for game data, which can help mitigate latency in scenarios with many entities or complex state tracking.

The Ryzen 5 7400F sits in the 83rd percentile of all CPUs, indicating strong overall performance. Its Cinebench R23 multi-core score of 21765 and single-core score of 3072 demonstrate a balanced profile. In the context of this game's measured results, the CPU appears to be a capable partner for the RTX 3070. At 1080p with Low settings, the system achieves 385 FPS, a figure that far exceeds the refresh rate of typical monitors. This high ceiling suggests that the CPU does not bottleneck the system at lower resolutions, where the GPU typically has less work to do per frame. The 6-core configuration is sufficient to feed the GPU, as evidenced by the high frame rates across all settings at 1080p.

The nearest rivals to the Ryzen 5 7400F in terms of average benchmark score include the Intel Core i5-14600T and the AMD Ryzen AI 7 PRO 360. The 7400F is essentially on par with these parts, with a negligible deltaPct of 0.1% and 0.3%, respectively. This indicates that the CPU's performance is in a well-populated tier, and its specific capabilities are not an outlier that would uniquely hinder or boost Barony. The processor’s 65 W TDP also suggests it is an efficient part, which can be a consideration for system builders, but the data shows its primary value is in its consistent frame delivery.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 3070 is built on the Ampere architecture with an 8 nm process node. It features 8 GB of GDDR6 memory on a 256-bit bus, providing 448.0 GB/s of bandwidth. The GPU has a base clock of 1500 MHz and a boost clock of 1725 MHz. For Barony, the 8 GB VRAM allocation is a key factor; the game's art style, which often includes high-resolution textures for items and environments, can be demanding. The data shows that at 4K Ultra settings, the average FPS drops to 58, which is a significant decline from the 81 FPS at High settings. This is a clear indicator that the GPU is the limiting factor at the highest resolution and quality preset, likely due to the combination of VRAM capacity and raw shading power.

The RTX 3070 holds a percentile rank of 61 among all GPUs. Its 3DMark Steel Nomad DX12 score is 3162, and its Passmark G3D score is 22214. In terms of nearest rivals, the AMD Radeon RX 7600 XT is a close match, with a deltaPct of 0.7%. This puts the RTX 3070 in a competitive position, though it is not a top-tier part by current standards. The GPU's performance in Barony reflects this mid-to-high-end positioning. At 1440p, the RTX 3070 delivers excellent results, with an average of 155 FPS on High settings. This suggests the GPU has ample headroom for high refresh rate gaming at this resolution, indicating that the 8 GB VRAM is sufficient for the game's demands at 1440p.

The transition from 1080p to 4K highlights the GPU's workload scaling. The data shows a clear pattern where the GPU becomes the primary bottleneck at higher resolutions. For instance, at 4K Ultra, the average FPS is 58, which is below the 60 FPS threshold that many consider the minimum for a smooth experience. This is a direct consequence of the GPU's compute and memory bandwidth limits being reached, rather than a CPU limitation, as the CPU's performance is consistent across the board.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combination of the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 3070 ranks 1230 out of 2935 tested combos for Barony. This places it in the 58th percentile of all tested combinations, meaning that roughly 42% of all tested configurations are faster. This rank is a holistic measure that considers both components' contributions to the game's performance. The rank suggests that while this is a capable setup, it is not at the top of the hierarchy for this specific title.

The combo's rank can be interpreted through the lens of its individual components. The CPU's 83rd percentile ranking is better than the GPU's 61st percentile, which implies that the GPU is the more limiting factor in this pairing for Barony. This is consistent with the FPS data, which shows that the system scales well with CPU-bound scenarios (like high FPS at low settings) but struggles to maintain high frame rates at 4K Ultra where the GPU is stressed. The combo rank of 1230 indicates that users can expect a solid, high-refresh-rate experience at 1080p and 1440p, but should temper expectations for 4K gaming.

The rank also contextualizes the system within the broader ecosystem of tested hardware. A rank of 1230 out of 2935 is a strong upper-middle-tier result. It means that for most users, this system will deliver a smooth and responsive experience in Barony, especially if they prioritize high frame rates over maximum visual fidelity. The data does not suggest this combo is a high-end enthusiast setup, but it is far from a low-end performer. The system's performance is well-balanced for the game's requirements, with the GPU being the primary determinant of the overall frame rate at higher resolutions.

FAQ

*Q: Can this system run Barony at 4K?*

A: Yes, it can. The measured data shows an average of 58 FPS at 4K Ultra and 81 FPS at 4K High. While 58 FPS is below the 60 FPS target for some, the High settings preset provides a playable experience at 4K.

Q: What is the best resolution for a 144 Hz monitor?

A: The data indicates that 1440p is the sweet spot. At 1440p High, the system averages 155 FPS, and at 1440p Medium it averages 181 FPS. Both exceed a 144 Hz refresh rate, providing a smooth and responsive experience.

Q: Is the CPU or GPU the limiting factor at 1080p?

A: The CPU appears to be the primary limiter at 1080p. This is inferred because the FPS at 1080p Low (385 FPS) and 1080p Ultra (176 FPS) are both exceptionally high, and the GPU is not saturated at these settings. The system's performance is more likely constrained by the CPU's frame generation rate at this resolution.

Q: Will lowering settings from Ultra to High improve performance at 4K?

A: Yes. The data shows a significant jump from 58 FPS at 4K Ultra to 81 FPS at 4K High, which is a 40% improvement. This suggests that the Ultra preset is particularly demanding, and High represents a better balance of visual quality and performance at 4K.

Q: How does this system's performance compare to its closest GPU rival?

A: The RTX 3070's average benchmark score is 17208, which is 0.7% higher than the AMD Radeon RX 7600 XT (17083). This indicates that the RTX 3070 is slightly faster on average, but the difference is minimal and likely not noticeable in real-world gameplay.

Q: What is the expected performance at 1440p on Medium settings?

A: The measured data shows an average FPS of 181 at 1440p Medium, with a minimum of 154 FPS and a maximum of 208 FPS. This indicates that the system can maintain a very high frame rate with good consistency, making it ideal for high-refresh-rate displays.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The FPS data across resolutions reveals a clear scaling pattern that identifies the GPU as the primary bottleneck at higher resolutions. At 1080p High, the system averages 246 FPS. When moving to 1440p High, the average drops to 155 FPS, a 37% decrease. At 4K High, the average falls to 81 FPS, a 48% decrease from the 1440p result. This scaling is characteristic of a GPU-bound scenario, where the rendering workload increases proportionally with the pixel count.

The scaling is even more pronounced at the Ultra preset. The system achieves 176 FPS at 1080p Ultra, 111 FPS at 1440p Ultra, and 58 FPS at 4K Ultra. The drop from 1440p to 4K at Ultra settings is 48%, indicating that the GPU's memory bandwidth and compute resources are being exhausted. The 8 GB VRAM is likely a contributing factor at 4K Ultra, as the higher resolution textures and effects can fill the frame buffer, leading to a performance penalty.

Conversely, the CPU's role is more evident at lower resolutions. The scaling from 1440p to 1080p is not as steep as the scaling from 4K to 1440p. For example, at Low settings, the system goes from 243 FPS at 1440p to 385 FPS at 1080p, a 58% increase. This suggests that at 1080p, the CPU is able to feed the GPU faster, but the frame rate is still limited by the CPU's maximum output. The data shows that the system is well-balanced, but the GPU is the component that dictates the maximum frame rate at resolutions above 1080p.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured FPS data, the recommended settings preset depends on the user's target resolution and refresh rate. For 1080p users with high-refresh-rate monitors (144 Hz or above), the Ultra preset is the best choice, as it averages 176 FPS, which is well above the refresh rate threshold. For 1440p users, the High preset is the optimal balance, delivering an average of 155 FPS, which is suitable for 144 Hz displays. The Ultra preset at 1440p, at 111 FPS, is also viable but may not fully utilize a 144 Hz monitor.

For 4K gaming, the High preset is the recommended setting. It averages 81 FPS, which is above the 60 FPS playability target, and provides a significantly better experience than the Ultra preset, which averages only 58 FPS. The Medium preset at 4K averages 95 FPS, which is even smoother, but the visual quality reduction from High may be noticeable. The data suggests that the High preset offers the best compromise between visual fidelity and performance across all resolutions.

The Low preset is not recommended for general use, as it yields exceptionally high frame rates (385 FPS at 1080p) that exceed the capabilities of most displays and may introduce unnecessary CPU load. The Medium preset can be a good fallback if the user prioritizes frame rate consistency over visual quality, as it shows the smallest difference between minimum and maximum FPS in the measured data (e.g., 80 to 109 FPS at 4K). Overall, the High preset is the most balanced choice for a majority of users.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

This section provides the exact measured average frame rates for the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 3070 in Barony.

1920x1080 (1080p):

• Ultra: The average FPS is 176.
• High: The average FPS is 246.
• Medium: The average FPS is 287, with a minimum of 244 and a maximum of 330.
• Low: The average FPS is 385.

2560x1440 (1440p):

• Ultra: The average FPS is 111.
• High: The average FPS is 155.
• Medium: The average FPS is 181, with a minimum of 154 and a maximum of 208.
• Low: The average FPS is 243.

3840x2160 (4K):

• Ultra: The average FPS is 58.
• High: The average FPS is 81.
• Medium: The average FPS is 95, with a minimum of 80 and a maximum of 109.
• Low: The average FPS is 127.

These figures show a consistent and logical progression. The system is capable of delivering high frame rates at 1080p and 1440p, with the performance at 4K being the most demanding scenario. The Medium preset consistently provides the most stable frame times, as indicated by the availability of min and max FPS data, which is not provided for the other presets. This suggests that the Medium preset is well-optimized for this hardware combination.