Lockdown Protocol

The AMD Ryzen 5 5600X and NVIDIA GeForce RTX 5060 combination delivers a robust 1080p and 1440p experience in Lockdown Protocol, though the data indicates a clear shift in system bottleneck as resolution and settings increase. This analysis breaks down the measured FPS data to show how the 6-core CPU and the 8 GB GDDR7 GPU interact across the tested spectrum.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 5600X is a 6-core, 12-thread processor from the 5000 series, built on the Zen 3 architecture (Vermeer) using a 7 nm process at TSMC. It operates with a base clock of 3.70 GHz and a boost clock of 4.60 GHz, with a 65 W TDP. The processor features 64 KB of L1 cache per core, 512 KB of L2 per core, and a 32 MB L3 cache. Its benchmark scores place it in the 78th percentile of all CPUs, with an average score of 20680.

In Lockdown Protocol, the CPU's influence is most visible at lower resolutions where frame rates are highest. At 1080p Low, the combo hits 201.7 FPS, which is substantially higher than the 4K Low result of 94.6 FPS. The 12 threads are sufficient to feed the GPU at these high frame rates, as evidenced by the strong scaling from 4K to 1080p. The CPU's single-thread performance, shown by a Geekbench single-core score of 2111, helps maintain high minimum frame rates in a fast-paced FPS title.

The nearest rivals for the 5600X, based on average benchmark scores, include the AMD Ryzen 5 5600GT (-0.3%), Intel Core i7-10700 (-0.3%), Intel Core i5-12490F (-0.5%), and Intel Xeon 6325P (+0.7%). The delta percentages are minimal, indicating that the 5600X sits at parity with these processors. In practical terms, the data shows that the CPU is not the primary limiting factor at 1080p, as the frame rates scale almost linearly with resolution, which points toward GPU limitations at higher settings.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 5060 is based on the Blackwell 2.0 architecture (GB206 chip) manufactured on a 5 nm process. It has 8 GB of GDDR7 memory on a 128-bit bus, delivering a bandwidth of 448.0 GB/s. The GPU has a base clock of 2280 MHz and a boost clock of 2497 MHz, with memory running at 1750 MHz (28 Gbps effective). It features 3840 shading units, 120 TMUs, and 48 ROPs, along with 30 RT cores and 120 tensor cores. The GPU's average benchmark score is 30109, placing it in the 73rd percentile of all GPUs.

The GPU's role in Lockdown Protocol becomes dominant at higher resolutions and settings. The 8 GB VRAM capacity is a critical factor; at 4K Ultra, the combo drops to 44.4 FPS, suggesting that the memory bandwidth and capacity are stressed. The 448.0 GB/s bandwidth is substantial, but the 128-bit bus width limits the data throughput compared to wider-bus cards. The nearest rivals for the RTX 5060 include the AMD Radeon RX 7700 XT (0% delta), AMD Radeon RX 570 (-0.2%), NVIDIA Tesla M60 (+0.5%), and NVIDIA GeForce RTX 5070 Mobile (+0.6%). The parity with the RX 7700 XT and RX 570 is notable, as the latter is a much older architecture, indicating that the RTX 5060's performance profile is consistent with that mid-range tier.

How This Combo Ranks — use comboRankInGame vs other tested combos

In the database of tested combinations for Lockdown Protocol, this CPU-GPU pairing ranks 815 out of 1637 combos. This places it in the middle of the distribution, which aligns with the measured frame rates that straddle the boundary between high-refresh 1080p gaming and playable 1440p. The rank of 815 suggests that while the combo is capable, it is not at the top tier for this title; many other pairings with higher-end CPUs or GPUs will outperform it, especially at 4K.

The rank is a function of the entire measured spectrum. At 1080p Low, the 201.7 FPS result is strong, but at 4K Ultra, the 44.4 FPS figure is below the 60 FPS threshold that many players consider the minimum for smooth gameplay. The combo's mid-pack ranking reflects this duality: it excels at lower resolutions but struggles to maintain high frame rates at 4K. The percentile scores for each component (78th for the CPU, 73rd for the GPU) are consistent with the combo's overall position, suggesting that neither component is significantly over- or under-performing relative to its class.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured data provides a complete matrix of average FPS across three resolutions and four quality presets.

At 1920x1080, the combo delivers:

• Low: 201.7 FPS
• Medium: 139.7 FPS
• High: 126.5 FPS
• Ultra: 93.7 FPS

This is a clear hierarchy where the gap between Low and Ultra is 108 FPS, a 53.6% drop from Low to Ultra. The transition from Medium to High is relatively small (a 13.2 FPS difference), suggesting that the High preset adds significant visual quality without a proportional performance penalty.

At 2560x1440, the results are:

• Low: 147.6 FPS
• Medium: 105.2 FPS
• High: 92.9 FPS
• Ultra: 68.7 FPS

The drop from Low to Ultra is 78.9 FPS, a 53.5% reduction, mirroring the 1080p scaling pattern. The Medium to High gap is slightly larger here (12.3 FPS), indicating that the GPU is starting to feel the resolution increase.

At 3840x2160, the numbers fall significantly:

• Low: 94.6 FPS
• Medium: 64.4 FPS
• High: 57.7 FPS
• Ultra: 44.4 FPS

The Ultra setting at 4K is the only sub-50 FPS result in the entire dataset. The gap between Low and Ultra is 50.2 FPS, a 53.1% drop, but the absolute numbers are much lower, making the experience less fluid at the top end.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The resolution scaling reveals a consistent pattern: moving from 1080p to 1440p costs roughly 27-30% of the frame rate, while moving from 1440p to 4K costs another 36-38%. Specifically, for the High preset, FPS drops from 126.5 (1080p) to 92.9 (1440p), a 26.6% reduction, and then to 57.7 (4K), a 37.9% reduction from 1440p. This non-linear scaling is characteristic of a GPU-bound scenario at higher resolutions.

The limiting component changes as resolution increases. At 1080p, the CPU is more likely to be the bottleneck, as the frame rates are high enough (201.7 FPS at Low) that the 5600X's 12 threads may struggle to keep up with the GPU's output. However, the data shows that the FPS scales almost perfectly with resolution at Low settings (201.7 to 147.6 to 94.6), which suggests that even at 1080p, the GPU is doing most of the heavy lifting.

At 4K, the GPU is unequivocally the limiting factor. The 8 GB VRAM and 128-bit memory bus are stressed, and the frame rates drop below the 60 FPS line for all settings except Low. The 4K Ultra result of 44.4 FPS is particularly telling; the GPU cannot maintain fluid gameplay at the highest fidelity. The data indicates that this combo is best suited for 1080p high-refresh gaming and 1440p at medium-to-high settings, with 4K reserved for Low settings or esports-style configurations where frame rate is prioritized over visual detail. The bottleneck shifts from a balanced load at 1080p to a clear GPU limitation at 4K, confirming that the RTX 5060 is the primary constraint in this pairing for Lockdown Protocol.