Inside
This combination offers playable performance with an average of 55 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 23 | 25 | 39 | 49 |
| 1440p QHD | 37 | 39 | 62 | 78 |
| 1080p Full HD | 52 | 54 | 87 | 109 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Inside with AMD Ryzen 5 7500X3D + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis
The AMD Ryzen 5 7500X3D and NVIDIA GeForce GTX 1050 Ti combination ranks near the bottom of the tested database for Inside, holding position 2837 out of 2887 total combos. This places the pairing in the 2nd percentile of all recorded configurations, indicating that while the game is playable, the hardware is heavily outclassed by the majority of systems tested. The rank reflects the GTX 1050 Ti’s position as the primary constraint; the GPU sits in the 25th percentile of all tested graphics cards, while the CPU ranks in the 89th percentile of all processors. The delta between these two components is stark, and the measured frame rates confirm that the graphics card, not the processor, dictates the experience.
How This Combo Ranks
The combo’s rank of 2837 out of 2887 is a clear signal that this pairing is not competitive in the broader benchmark landscape. Only 50 configurations performed worse, which means the system is effectively at the tail end of the distribution. When analyzing the components individually, the disparity becomes obvious: the CPU’s average benchmark score of 44573 places it just 0.2% ahead of the Intel Core Ultra X9 388H (44466) and 0.5% ahead of the Intel Core i9-13950HX (44342), while trailing the Intel Core i5-14600 by 0.7% (44889). These are marginal differences, all within a 1.3% band, indicating the Ryzen 5 7500X3D is a high-performing processor regardless of the specific rival.
Conversely, the GPU’s average benchmark score of 4193 is only 0.6% above the AMD Radeon R5 M330 (4170) and 1% above the NVIDIA Quadro K2100M (4151), while sitting 1.1% below the NVIDIA Quadro K3000M (4241) and 1.8% below the AMD Radeon Vega 3 (4268). This places the GTX 1050 Ti in the company of low-end mobile and entry-level desktop parts, a far cry from the CPU’s league. The result is a system where the processor is capable of far more than the graphics card can deliver, and the combo rank reflects that bottleneck. In practical terms, the data shows that this pairing will consistently produce frame rates that are among the lowest recorded for Inside, regardless of the settings chosen.
GPU Role
The NVIDIA GeForce GTX 1050 Ti is the limiting factor in this configuration. Its 4 GB of GDDR5 memory on a 128-bit bus provides 112.1 GB/s of bandwidth, which is adequate for the game’s art style but not for high resolutions or demanding presets. The GPU’s base clock of 1291 MHz and boost clock of 1392 MHz are modest, and the Pascal architecture’s 768 shading units deliver a raw FP32 throughput of 2.138 TFLOPS. These specifications place the card in the 25th percentile of all GPUs, and its benchmark scores reinforce this: a Passmark G3D score of 6340 and a DirectX 12 score of 26 are indicative of a part designed for 1080p gaming at medium settings, not for pushing pixels at 4K.
In Inside, the GPU’s role is singular: it must render a side-scrolling puzzle platformer with a muted color palette and minimal particle effects. The data shows that even with this relatively undemanding title, the GTX 1050 Ti struggles as resolution increases. At 1920x1080, the card manages a playable 54 FPS on High settings, but at 3840x2160, that drops to 25 FPS. The 4 GB VRAM is not directly saturated by the game’s textures, but the memory bandwidth and pixel fill rate (44.54 GPixel/s) become bottlenecks at higher resolutions. The GPU’s texture rate of 66.82 GTexel/s is sufficient for the game’s 2D sprites, yet the render resolution still overwhelms the card’s compute capabilities. The takeaway is that the GTX 1050 Ti is the definitive ceiling for performance, and any improvement in frame rate must come from lowering settings or resolution, not from the CPU.
Resolution Scaling
The measured frame rates reveal a clear pattern of GPU-bound scaling. Moving from 1920x1080 to 2560x1440 at High settings, the average FPS drops from 54 to 39, a reduction of 27.8%. From 2560x1440 to 3840x2160, the average falls from 39 to 25, a 35.9% decline. This accelerating drop-off is characteristic of a graphics card that is running out of pixel processing headroom. At Low settings, the trend is similar but less severe: 109 FPS at 1080p, 78 FPS at 1440p, and 49 FPS at 4K. The percentage losses are 28.4% and 37.2% respectively, showing that even when the render load is lightened, the GPU’s limitations persist.
The scaling suggests that the limiting component is the GPU, not the CPU. If the processor were the constraint, the frame rates would remain relatively flat across resolutions, as the CPU’s workload does not change with pixel count. Instead, the data shows a proportional response to resolution changes, which is the hallmark of a GPU bottleneck. The Ryzen 5 7500X3D, with its 6 cores and 12 threads, is far more than adequate for Inside; its Passmark single-thread score of 3494 and multithread score of 25047 indicate that it can feed frames to the GPU without breaking a sweat. The game’s CPU demand is low, and the processor’s 96 MB of L3 cache and 4.50 GHz boost clock are overkill for this title. The bottleneck is unequivocally the GTX 1050 Ti, and the resolution scaling data confirms it.
Settings Recommendations
Based on the measured rows, the optimal setting for this combo depends on the target resolution, but the data strongly favors Medium at 1080p as the best balance. At 1920x1080, Medium yields an average of 87 FPS with a minimum of 74 FPS and a maximum of 100 FPS. This is well above the 60 FPS threshold for smooth gameplay and provides a comfortable margin for scene complexity. High at 1080p drops to 54 FPS, which is playable but less fluid, and Ultra falls to 52 FPS. Low at 1080p reaches 109 FPS, but the visual compromise is unnecessary given the Medium result.
At 2560x1440, Medium is the only preset that maintains playability, with an average of 62 FPS and a minimum of 53 FPS. High and Ultra fall to 39 and 37 FPS respectively, which are borderline, while Low hits 78 FPS but sacrifices too much visual fidelity. At 3840x2160, no preset achieves a consistent 60 FPS; Medium averages 39 FPS, Low averages 49 FPS, and High and Ultra drop to 25 and 23 FPS. For 4K, the data suggests that Low is the only viable option, and even then, the experience will be suboptimal. The recommendation is clear: use Medium at 1080p for the best experience, or Medium at 1440p if resolution is a priority. The GPU’s 4 GB VRAM and 112.1 GB/s bandwidth are sufficient for these settings, and the minimum frame rates indicate no severe stuttering.
Measured FPS Breakdown
The measured frame rates are consistent across the board, with no anomalous spikes or dips. At 1920x1080, the progression from Low to Ultra is 109, 87, 54, and 52 FPS. The jump from Low to Medium is 22 FPS, which is substantial, but the difference between Medium and High is 33 FPS, indicating that High settings impose a significant load on the GPU. The gap between High and Ultra is only 2 FPS, suggesting that Ultra is not meaningfully more demanding than High for this game. The Medium preset’s minimum of 74 FPS and maximum of 100 FPS show a tight range, which is good for consistency.
At 2560x1440, the averages are 78 (Low), 62 (Medium), 39 (High), and 37 (Ultra). The Medium preset’s minimum of 53 FPS and maximum of 72 FPS are respectable, but the drop to High is severe, losing 23 FPS. This suggests that High settings at 1440p push the GPU beyond its comfort zone. At 3840x2160, the averages are 49 (Low), 39 (Medium), 25 (High), and 23 (Ultra). The Medium preset’s minimum of 33 FPS and maximum of 45 FPS show that even the best 4K option struggles to maintain 40 FPS consistently. The data paints a clear picture: the GTX 1050 Ti is capable of 1080p gaming at medium settings, but anything beyond that requires significant compromises.
FAQ
*Q: What is the best resolution for this combo in Inside?*
A: The data shows that 1920x1080 is the most consistent resolution, with all presets averaging above 50 FPS. At 2560x1440, only Medium and Low exceed 60 FPS, while at 3840x2160, no preset reaches 50 FPS.
Q: Why does the frame rate drop so much from 1080p to 4K?
A: The drop is due to the GPU’s limited pixel processing capabilities. The GTX 1050 Ti has a pixel rate of 44.54 GPixel/s, and the increase in resolution from 1920x1080 to 3840x2160 quadruples the pixel count, which overwhelms the card.
Q: Is the CPU or GPU the bottleneck in this system?
A: The GPU is the bottleneck. The Ryzen 5 7500X3D ranks in the 89th percentile of all CPUs, while the GTX 1050 Ti ranks in the 25th percentile. The frame rates scale with resolution, which is a sign of GPU limitation.
*Q: Can this combo run Inside at 60 FPS?*
A: Yes, but only at 1080p with Medium or Low settings. Medium averages 87 FPS, and Low averages 109 FPS. At 1440p, Medium averages 62 FPS, which is above 60, but High and Ultra fall below.
Q: How does the GTX 1050 Ti compare to its nearest rivals?
A: The GTX 1050 Ti’s average benchmark score of 4193 is 0.6% higher than the AMD Radeon R5 M330 and 1% higher than the NVIDIA Quadro K2100M, but 1.1% lower than the NVIDIA Quadro K3000M and 1.8% lower than the AMD Radeon Vega 3.
Q: What is the highest quality preset that maintains a playable frame rate at 1080p?
A: Medium is the highest preset that averages above 60 FPS, with 87 FPS and a minimum of 74 FPS. High averages 54 FPS, which is playable but not as smooth.
CPU Role
The AMD Ryzen 5 7500X3D is a high-end processor that is severely underutilized in this configuration. With 6 cores and 12 threads, a base clock of 4.00 GHz, and a boost clock of 4.50 GHz, the CPU has ample computational power for Inside. The processor’s 96 MB of shared L3 cache is particularly notable, as it provides fast access to frequently used data, which can benefit games with large asset streaming. The CPU’s Passmark scores reinforce its capability: a single-thread score of 3494 and a multithread score of 25047 place it in the 89th percentile of all CPUs, with an average benchmark score of 44573.
In Inside, the CPU’s role is to manage game logic, physics, and draw calls, all of which are minimal for a 2D puzzle platformer. The data shows that the CPU is not a limiting factor, as frame rates drop uniformly with resolution increases, which is a GPU-side effect. The processor’s nearest rivals, such as the Intel Core Ultra X9 388H and Intel Core i9-13950HX, have similar average scores (44466 and 44342 respectively), and the performance difference is negligible. The Ryzen 5 7500X3D’s 5 nm process node and 65 W TDP indicate an efficient design, but these advantages are irrelevant when the GPU cannot keep up. In this system, the CPU is a bystander, waiting for the GTX 1050 Ti to deliver frames it could easily process. The conclusion is that the CPU is more than capable, and any performance upgrade would require a GPU replacement, not a processor swap.
Hardware Specifications
AMD Ryzen 5 7500X3D
NVIDIA GeForce GTX 1050 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7500X3D + NVIDIA GeForce GTX 1050 Ti in Inside
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 49.0 |
| 3840x2160 | Medium | 39.0 |
| 3840x2160 | High | 25.0 |
| 3840x2160 | Ultra | 23.0 |
| 2560x1440 | Low | 78.0 |
| 2560x1440 | Medium | 62.0 |
| 2560x1440 | High | 39.0 |
| 2560x1440 | Ultra | 37.0 |
| 1920x1080 | Low | 109.0 |
| 1920x1080 | Medium | 87.0 |
| 1920x1080 | High | 54.0 |
| 1920x1080 | Ultra | 52.0 |
Inside with Ryzen 5 7500X3D + Other GPUs
See how Inside performs with the same CPU but different graphics cards.
Inside with GTX 1050 Ti + Other CPUs
See how Inside performs with the same GPU but different processors.
Other Games with Ryzen 5 7500X3D + GTX 1050 Ti
Explore FPS benchmarks for other games using this same hardware combination.