Hitman 2

The Intel Core i5-14400F paired with the NVIDIA GeForce RTX 5060 lands in the 904th position out of 1,795 tested combos for Hitman 2. This places the configuration in the middle of the pack, meaning that while it is not a top-tier performer for this title, it sits comfortably ahead of roughly half of all recorded system combinations. The percentile data for the individual components supports this positioning: the CPU ranks in the 88th percentile against all processors, while the GPU sits in the 73rd percentile against all graphics cards. The combination’s mid-pack ranking suggests that neither component is a bottleneck in a way that would push the system into the upper echelon, but the hardware is clearly capable of delivering a playable experience across most settings.

How This Combo Ranks

At rank 904 of 1,795, this combo occupies the exact median territory of tested systems for Hitman 2. The CPU’s average benchmark score of 32,508 places it within 0.2% of the AMD Ryzen 5 PRO 7645, which scores 32,446, and within 0.2% of the Intel Core i7-12800H, which scores 32,513. This means the processor is effectively tied with those rivals in raw compute performance. Meanwhile, the GPU’s average benchmark score of 30,109 is essentially identical to the AMD Radeon RX 7700 XT at 30,097, with a delta of 0%. The RTX 5060 also sits 0.6% ahead of the NVIDIA GeForce RTX 5070 Mobile, which scores 29,928.

The implication for Hitman 2 is that this combo should perform similarly to systems using those rival components. The mid-pack ranking is not a sign of weakness; rather, it reflects that many tested combos use higher-end CPUs or GPUs that push the average FPS higher. The data shows that the i5-14400F’s multi-threaded strength, evidenced by a Cinebench R23 multi-core score of 21,914 and a single-core score of 3,093, provides a solid foundation for a game that relies on both CPU and GPU. However, the GPU’s 8 GB of VRAM and mid-range compute throughput, indicated by a Passmark G3D score of 20,891, will likely cap performance in the most demanding scenarios.

GPU Role

The RTX 5060 brings 8 GB of GDDR7 memory on a 128-bit bus, yielding a bandwidth of 448.0 GB/s. For Hitman 2, a game from 2018, this memory configuration is more than sufficient for standard textures and geometry. The GPU’s base clock is 2,280 MHz, boosting to 2,497 MHz, which allows for consistent frame delivery under load. The 30 RT cores and 120 tensor cores are present, but Hitman 2 does not heavily utilize ray tracing, so their impact on these measured results is minimal.

The GPU’s FP32 throughput is 19.18 TFLOPS, which is a strong figure for a mid-range card. In the measured FPS data, the GPU’s role becomes apparent at higher resolutions. At 1080p, the CPU is often the limiting factor, as the GPU can push very high frame rates. At 4K, however, the GPU’s workload increases dramatically, and the frame rates drop to levels that suggest the GPU is the primary constraint. The Passmark DirectX 12 score of 77 and DirectX 11 score of 200 indicate that the card handles modern APIs well, but the actual game performance will depend on how well Hitman 2’s engine scales with the Blackwell architecture.

Resolution Scaling

The measured FPS data reveals a clear scaling pattern from 1080p to 4K. At High settings, the average frame rate drops from 104.1 FPS at 1920x1080, to 63.8 FPS at 2560x1440, and finally to 36.1 FPS at 3840x2160. This represents a 65% reduction in frame rate when moving from 1080p to 4K at High settings. The drop from 1080p to 1440p is a 39% reduction, while the drop from 1440p to 4K is a 43% reduction. This pattern indicates that the GPU is the limiting component at higher resolutions, as the CPU’s performance does not degrade with resolution.

At Low settings, the scaling is even more pronounced. The frame rate goes from 179.9 FPS at 1080p, to 118.5 FPS at 1440p, and then to 59.9 FPS at 4K. The jump from 1440p to 4K is a 49% drop, which shows that the GPU is struggling to fill the extra pixels even with reduced graphical fidelity. The data suggests that at 1080p Low, the CPU is the bottleneck, as the GPU could likely push higher frame rates if the CPU could keep up. At 4K Low, the GPU is clearly the limiting factor, as the frame rate is close to half of what it is at 1440p.

Measured FPS Breakdown

At 1920x1080, the RTX 5060 delivers strong results across all settings. The Low preset achieves an average of 179.9 FPS, which is well above the threshold for high-refresh-rate monitors. Medium settings drop to 134.6 FPS, while High settings yield 104.1 FPS. The Ultra preset, which is the most demanding, still manages 75.8 FPS. These numbers indicate that the combo is fully playable at 1080p, with even the most demanding preset staying above 60 FPS.

Moving to 2560x1440, the frame rates remain respectable but show the GPU’s growing load. Low settings produce 118.5 FPS, Medium produces 85.6 FPS, and High produces 63.8 FPS. The Ultra preset falls to 49.3 FPS, which is below the ideal 60 FPS mark but still playable for a stealth game where precise timing is less critical. At 1440p, the data suggests that High settings strike a balance between visual quality and performance, while Ultra requires a compromise.

At 3840x2160, the GPU’s limits become evident. Low settings average 59.9 FPS, which is just under 60 FPS, while Medium drops to 47.2 FPS. High settings yield 36.1 FPS, and Ultra falls to 27.9 FPS. These numbers are below the preferred playable threshold for most users, indicating that 4K gaming with this combo requires significant settings reductions. The Ultra preset at 4K is not recommended for a smooth experience, as the frame rate is below 30 FPS.

FAQ

Q: Is this combo suitable for 1080p gaming in Hitman 2?

A: Yes, the data shows average frame rates of 104.1 FPS at High settings and 75.8 FPS at Ultra settings, both well above the 60 FPS threshold.

Q: How does the GPU compare to its nearest rivals in raw compute?

A: The RTX 5060’s average benchmark score of 30,109 is within 0.2% of the AMD Radeon RX 7700 XT, which scores 30,097, and 0.6% ahead of the NVIDIA GeForce RTX 5070 Mobile, which scores 29,928.

Q: What is the performance cost of moving from 1080p to 4K at High settings?

A: The average frame rate drops from 104.1 FPS at 1080p to 36.1 FPS at 4K, a reduction of 65%.

Q: Can this combo handle 4K Ultra settings?

A: No, the measured average FPS at 4K Ultra is 27.9, which is below the playable threshold for most users.

Q: Which CPU is this i5-14400F most similar to in performance?

A: The CPU’s average benchmark score of 32,508 is within 0.2% of the AMD Ryzen 5 PRO 7645, which scores 32,446, and the Intel Core i7-12800H, which scores 32,513.

Q: What is the limiting component at 1440p Medium settings?

A: The frame rate of 85.6 FPS suggests the GPU is handling the load well, but the drop to 49.3 FPS at Ultra indicates the GPU becomes the primary constraint as settings increase.

Settings Recommendations

For the best experience, the data points to 1080p High as the optimal balance between visual fidelity and performance, with an average of 104.1 FPS. This setting provides a smooth frame rate that exceeds the 60 FPS target while maintaining higher graphical quality than Medium or Low. At 1440p, High settings at 63.8 FPS are the best choice for those prioritizing performance, as this stays above 60 FPS. Medium at 85.6 FPS offers a smoother experience if the visual downgrade is acceptable, but the incremental gain over High is not substantial in terms of playability.

For 4K, the data suggests that only Low settings at 59.9 FPS approach a playable frame rate, but even this is borderline. Medium at 47.2 FPS and High at 36.1 FPS are below the 60 FPS threshold, making them less desirable for a consistent experience. The Ultra preset is not recommended at any resolution above 1080p, as the frame rate at 1440p is 49.3 FPS and at 4K is 27.9 FPS. Given the GPU’s 8 GB of VRAM, the Ultra preset’s higher texture demands may also cause memory pressure, although the measured data does not indicate a specific VRAM bottleneck. Overall, the combo is best utilized at 1080p with High settings, or at 1440p with High settings for a slightly more demanding visual experience.