Hitman 2

Hitman 2’s performance with the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 5060 reveals a hardware pairing that scales predictably with resolution, but with a notable twist at the highest settings. The data shows a system that is clearly capable of smooth gameplay at mainstream resolutions, yet the extreme demands of 4K Ultra push it to its limits. This analysis breaks down the measured results, contextualizes the component roles, and offers practical settings guidance based solely on the provided metrics.

Resolution Scaling

The measured FPS data shows a steep and consistent performance drop as resolution increases from 1920x1080 to 3840x2160. At High settings, the average frame rate falls from 104 FPS at 1080p to 66 FPS at 1440p, a reduction of 38 FPS. Pushing further to 4K, the average drops again to 35 FPS, which represents a 66% decrease from the 1080p figure. This scaling pattern indicates that the GPU becomes the primary limiting factor at higher resolutions, as the pixel count increases dramatically and places a heavier load on the rendering pipeline.

The scaling from 1080p to 1440p at High settings shows a 36.5% performance hit, which is substantial but still leaves the game playable. The jump from 1440p to 4K is even more punishing, with a 47% reduction in average FPS. This suggests that the RTX 5060’s 8 GB of GDDR7 memory and 128-bit memory bus are sufficient for 1080p and 1440p, but the 4K resolution’s massive pixel throughput requirements overwhelm the card’s capabilities, particularly at higher detail levels. The fact that 4K Low (62 FPS) outperforms 4K High (35 FPS) by a wide margin confirms that resolution is the dominant factor, but settings also play a crucial role in determining whether the game remains fluid.

At 1080p, the scaling from Low to Ultra shows a more moderate performance decline, from 183 FPS down to 76 FPS. This indicates that at this resolution, the CPU still has enough headroom to feed the GPU, and the bottleneck shifts gradually toward the graphics card as settings increase. The 4K data tells a different story: the difference between Low (62 FPS) and Ultra (26 FPS) is a massive 36 FPS swing, highlighting how the combination of high resolution and high settings creates a compounding load on the GPU that the RTX 5060 cannot sustain.

GPU Role

The NVIDIA GeForce RTX 5060’s specifications provide context for its measured performance in Hitman 2. With a base clock of 2280 MHz and a boost clock of 2497 MHz, the card’s raw compute power is substantial for its class, but it is paired with 8 GB of GDDR7 memory on a 128-bit bus, yielding a bandwidth of 448.0 GB/s. This memory configuration is likely the key constraint when moving to 4K, as the game’s texture data and frame buffers can quickly fill the available VRAM, leading to the observed FPS drops.

The GPU’s 3840 shading units and 120 texture mapping units provide solid fill rates, with a texture rate of 299.6 GTexel/s and a pixel rate of 119.9 GPixel/s. These figures suggest the card can handle geometry and texture work efficiently at lower resolutions, but the 48 ROPs may become a limiting factor at 4K, where the pixel fill rate requirement is quadrupled compared to 1080p. The benchmark results align with this: the card scores 20891 in Passmark G3D and 77 in Passmark DirectX 12, placing it in the 72nd percentile of all GPUs. Its nearest rivals, such as the AMD Radeon 860M (deltaPct -0.3) and NVIDIA GeForce MX550 (deltaPct -0.3), are within a 1% performance margin, but the RTX 5060’s lead over the AMD Radeon RX 6750 XT (deltaPct 1.2) is more pronounced.

The 4K Medium result (47 FPS) with a minimum of 40 FPS and maximum of 54 FPS shows that the GPU can still produce playable frame rates if settings are moderated. However, the 4K Ultra result of 26 FPS, with no recorded minimum or maximum, indicates a scenario where the GPU is fully saturated and frame pacing likely suffers. This points to the RTX 5060 being a capable 1080p and 1440p card, but its 8 GB VRAM and narrower bus make it ill-suited for 4K Ultra in a game like Hitman 2, which has dense environments and complex lighting effects.

How This Combo Ranks

In the context of all tested hardware combinations for this game, the Ryzen 5 7400F and RTX 5060 pairing ranks 1313 out of 3001 combos. This places it in the upper-middle tier, meaning it outperforms roughly 56% of all tested systems, but it is far from the top tier. This ranking reflects a balanced mid-range setup that delivers solid performance at mainstream resolutions but does not compete with high-end configurations that feature more powerful CPUs and GPUs with larger memory pools.

The combo’s rank relative to its component parts is interesting. The CPU, with an average benchmark score of 32750, sits in the 83rd percentile of all CPUs, putting it well above average. The GPU, with an average score of 26331, is in the 72nd percentile. The combined ranking of 1313 out of 3001 suggests that the system’s in-game performance is slightly lower than what the individual component percentiles might imply, likely due to the GPU’s VRAM limitation at higher resolutions. This indicates that while the components are individually strong, their synergy in Hitman 2 is constrained by the graphics card’s memory capacity, particularly when pushing beyond 1080p.

The data implies that this combo is well-suited for 1080p and 1440p gaming, where the CPU’s strong single-threaded performance and the GPU’s adequate bandwidth allow for high frame rates. At 4K, the system falls to the lower end of playable performance, which drags down its overall ranking. This suggests that for users targeting 4K, this hardware combination would benefit from reduced settings or a GPU upgrade, while for 1080p and 1440p users, it represents a highly capable pairing.

Measured FPS Breakdown

At 1920x1080, the RTX 5060 delivers excellent performance across all settings. Low settings yield an average of 183 FPS, which is exceptionally high and indicates that the CPU and GPU are working efficiently without any bottleneck. Medium settings produce 137 FPS, with a minimum of 117 and maximum of 158, showing solid frame consistency. High settings average 104 FPS, which is still very smooth for a stealth game requiring precise movements. Ultra settings drop to 76 FPS, but this remains above the 60 FPS threshold for comfortable play, demonstrating that the card can handle maxed-out 1080p gaming without issues.

Moving to 2560x1440, the performance scales down but remains respectable. Low settings average 117 FPS, which is a significant drop from 1080p but still provides a fluid experience. Medium settings hit 88 FPS, with a minimum of 75 and maximum of 101, indicating good frame pacing. High settings average 66 FPS, which is playable but requires a tolerance for occasional dips below the 60 FPS mark. Ultra settings fall to 49 FPS, which is borderline playable but may feel less responsive during intense action sequences. The 1440p results show that the system can handle the resolution with medium to high settings, but Ultra is not recommended for a consistently smooth experience.

At 3840x2160, the data reveals the hardware’s limitations. Low settings average 62 FPS, which is just barely playable, but the frame rate is likely to fluctuate. Medium settings drop to 47 FPS, with a minimum of 40 and maximum of 54, indicating noticeable stutter during heavy scenes. High settings average 35 FPS, which is below the threshold for smooth gameplay. Ultra settings bottom out at 26 FPS, making the game nearly unplayable at this configuration. These 4K results clearly show that the GPU is the limiting factor, and users would need to significantly compromise settings to achieve a stable frame rate at this resolution.

CPU Role

The AMD Ryzen 5 7400F is a 6-core, 12-thread processor based on the Zen 4 Raphael architecture, fabricated on a 5 nm process. With a base clock of 3.70 GHz and a boost clock of 4.70 GHz, it offers strong single-threaded performance, as evidenced by its Cinebench R23 single-core score of 3072 and Passmark single-thread score of 3689. This is crucial for Hitman 2, which relies on a single primary game thread for simulation and AI, but can also utilize multiple cores for rendering tasks.

In the measured FPS data, the CPU’s role becomes apparent at 1080p with Low settings, where the average of 183 FPS suggests the CPU is capable of feeding the GPU with enough draw calls to achieve very high frame rates. The Cinebench R23 multi-core score of 21765 indicates that the processor can handle the game’s background tasks, such as physics and audio, without becoming a bottleneck. The 32 MB of shared L3 cache is also beneficial for keeping frequently accessed game data close to the cores, reducing latency.

The CPU’s performance relative to its nearest rivals is tight, with a deltaPct of 0.1 compared to the Intel Core i5-14600T and 0.2 compared to the Intel Core Ultra 7 155H. This means the 7400F is essentially on par with these competitors in synthetic benchmarks, but its real-world gaming performance is likely influenced by its higher boost clock and efficient architecture. The processor’s 65 W TDP and support for DDR5 memory with an 83.2 GB/s bandwidth further support its ability to maintain high frame rates without thermal throttling, as seen in the 1080p results where the CPU keeps pace with the GPU up to the High settings tier.

FAQ

Q: What is the best resolution for this combo to achieve 60 FPS or higher in Hitman 2?

A: Based on the measured FPS, 1920x1080 is the only resolution where all settings achieve above 60 FPS, with Ultra averaging 76 FPS. At 2560x1440, only Low (117 FPS) and Medium (88 FPS) settings exceed 60 FPS, while High (66 FPS) is close but not guaranteed. At 3840x2160, no settings reach 60 FPS, with the highest being Low at 62 FPS.

Q: How does the RTX 5060’s VRAM affect performance at 4K?

A: The 8 GB of GDDR7 memory on a 128-bit bus is the likely cause of the severe FPS drops at 4K. The bandwidth of 448.0 GB/s is insufficient for the high resolution’s texture and buffer demands, leading to the average FPS falling to 35 at High and 26 at Ultra, indicating memory bandwidth saturation.

Q: Is the Ryzen 5 7400F a bottleneck for the RTX 5060?

A: No, the data indicates the CPU is not a limiting factor. At 1080p Low, the combo reaches 183 FPS, and the CPU’s Cinebench R23 multi-core score of 21765 and Passmark single-thread score of 3689 show it has ample headroom. The bottleneck shifts to the GPU as resolution increases, particularly at 4K.

Q: What is the average FPS difference between High and Ultra settings at 1440p?

A: At 2560x1440, High settings average 66 FPS, while Ultra settings average 49 FPS. This represents a 17 FPS difference, indicating that the Ultra preset adds significant visual detail at the cost of a 26% performance reduction, making High the better choice for smoother gameplay.

Q: How does this combo rank compared to other tested systems for this game?

A: The combo ranks 1313 out of 3001 tested combinations. This places it in the upper-middle range, suggesting it is more capable than the majority of systems but lacks the top-tier performance needed for consistently high frame rates at 4K Ultra.

Q: Which settings provide the most stable frame times based on the minimum FPS data?

A: The only settings with recorded minimum FPS are Medium at all resolutions. At 1080p Medium, the minimum is 117 FPS; at 1440p Medium, it is 75 FPS; and at 4K Medium, it is 40 FPS. This indicates that Medium settings offer the most predictable frame pacing across all resolutions, avoiding large dips.

Settings Recommendations

For the best experience with this hardware, the data strongly favors 1920x1080 as the primary resolution. At 1080p, even the Ultra preset achieves an average of 76 FPS, which is smooth for a stealth game. For users who prioritize visual fidelity, Ultra at 1080p is the optimal choice, as it delivers high detail without sacrificing playability. If a higher frame rate is desired, the High preset at 104 FPS offers a better balance, providing a significant FPS boost with only a minor reduction in visual quality compared to Ultra.

For 2560x1440 users, the High preset at 66 FPS is the most balanced option, offering a good mix of visual quality and performance. The Medium preset at 88 FPS is preferable if frame rate consistency is a priority, as it has the highest minimum FPS (75) among 1440p settings, and the visual difference between Medium and High is often less noticeable in fast-paced action. Ultra at 1440p is not recommended, as the 49 FPS average falls below the 60 FPS threshold and may result in noticeable stutter.

At 3840x2160, the data suggests avoiding this resolution for a smooth experience. The Low preset at 62 FPS is the only playable option, but it requires sacrificing most graphical details. The Medium preset at 47 FPS is borderline, with a minimum of 40 FPS indicating potential frame drops. For users with 4K displays, it is advisable to either lower the resolution to 1440p or accept significant compromises, as the RTX 5060’s 8 GB VRAM and bandwidth constraints make 4K gaming challenging. The overall recommendation is to prioritize 1080p with High or Ultra settings, or 1440p with Medium or High settings, to get the most out of this hardware pairing in Hitman 2.