Hitman 2

Hitman 2

AVERAGE FPS
54
playable

This combination offers playable performance with an average of 54 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 18 26 30 40
1440p QHD 33 45 57 78
1080p Full HD 49 68 87 117

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 40
3840x2160 Medium 30
3840x2160 High 26
3840x2160 Ultra 18
2560x1440 Low 78
2560x1440 Medium 57
2560x1440 High 45
2560x1440 Ultra 33
1920x1080 Low 117
1920x1080 Medium 87
1920x1080 High 68
1920x1080 Ultra 49

Hitman 2 with AMD Ryzen 5 3600 + NVIDIA GeForce GTX 1070, In-Depth Analysis

Resolution Scaling

The measured frame rates for Hitman 2 with the AMD Ryzen 5 3600 and NVIDIA GeForce GTX 1070 show a steep performance gradient as resolution climbs. At 1920x1080 with Low settings, the combo produces 116.8 FPS, but at 3840x2160 with Ultra settings, the average drops to 18.2 FPS. That is a 98.4 FPS swing across the entire resolution/settings matrix, which illustrates how heavily the rendering load scales with pixel count.

Looking at the 1080p to 4K transition at a fixed setting, the data reveals the GPU as the primary limiting component. At High settings, the average frame rate falls from 67.5 FPS at 1920x1080 to 45 FPS at 2560x1440, then further to 25.5 FPS at 3840x2160. The relative drop from 1080p to 1440p is 22.5 FPS, while the drop from 1440p to 4K is 19.5 FPS. This pattern indicates a consistent, resolution-driven bottleneck rather than a sudden collapse, which is typical for a GPU-bound scenario. The GTX 1070's 8 GB GDDR5 memory and 256-bit bus are being pushed harder as the pixel count increases, and the frame rate responds proportionally.

The Low settings curve tells a similar story. At 1920x1080, Low yields 116.8 FPS, which drops to 77.7 FPS at 2560x1440 and then to 39.6 FPS at 3840x2160. The 4K Low result is still below the 1080p Medium result of 86.8 FPS, confirming that even at the lowest graphical preset, the 4K resolution imposes a substantial penalty. The fact that 4K Low (39.6 FPS) is only slightly above 1440p Ultra (33 FPS) suggests that resolution scaling has a more pronounced effect than settings scaling in this configuration.

The Ultra preset shows the most dramatic degradation. At 1080p Ultra, the average is 48.9 FPS, which is playable. At 1440p Ultra, it falls to 33 FPS, and at 4K Ultra, it bottoms out at 18.2 FPS. The gap between 1440p Ultra and 4K Ultra is 14.8 FPS, which is proportionally larger than the gaps seen at lower settings. This suggests that the combination of high resolution and high graphical fidelity overwhelms the GTX 1070's compute resources, particularly its 6.463 TFLOPS FP32 throughput and 64 ROPs.

The data indicates that the Ryzen 5 3600 is not the limiting factor in most scenarios. The CPU's 6 cores and 12 threads, running at a base clock of 3.60 GHz and boost clock of 4.20 GHz, provide ample headroom. The frame rate differences between resolutions at the same settings are consistent with GPU-bound behavior, where the graphics card's rendering capacity dictates the output. Only at the lowest resolution and settings (1080p Low, 116.8 FPS) might the CPU begin to assert itself, but the data does not show a plateau that would indicate a hard CPU ceiling.

CPU Role

The AMD Ryzen 5 3600 is a 6-core, 12-thread processor built on the Zen 2 architecture and fabricated on TSMC's 7 nm process. Its base clock of 3.60 GHz and boost clock of 4.20 GHz, combined with a 32 MB shared L3 cache, position it as a capable mid-range desktop part. In the context of Hitman 2, which is a stealth game that typically relies on both single-threaded and multi-threaded workloads, the CPU's performance characteristics matter, but the measured data suggests the GPU is the dominant constraint.

The CPU's benchmark scores provide context for its capabilities. In Cinebench R23, it scores 15045 in multi-core and 2124 in single-core. The 3DMark results show a scaling pattern from 1361 in the 2-thread test to 4605 in the 16-thread test, indicating that the processor scales well with additional threads. This is relevant because Hitman 2 can utilize multiple cores for AI, physics, and scene management, but the game's frame rate at higher resolutions is more dependent on the GPU's pixel and texture processing.

The CPU's percentile rank of 76 among all CPUs, with an average benchmark score of 18129, places it slightly below the Intel Core i5-11400 (which scores 18150, a delta of -0.1%) and slightly above the AMD Ryzen 5 7535HS (18101, a delta of 0.2%). This tight clustering means the Ryzen 5 3600 is not leaving performance on the table relative to its direct competitors. In Hitman 2, the CPU's role is to feed the GPU with draw calls and game logic, and the frame rate data shows that even at 1080p Low (116.8 FPS), the CPU is able to sustain a high enough throughput to avoid becoming a bottleneck.

The relationship between CPU clocks and game results is evident when comparing the single-thread and multi-thread scores. The 3DMark single-thread score of 696 and the Cinebench R20 single-core score of 892 indicate that the CPU's IPC (instructions per clock) is competitive for its generation. In a game like Hitman 2, which may have sections that are more CPU-intensive (e.g., crowds or complex scripting), the boost clock of 4.20 GHz helps maintain frame time consistency. However, the measured FPS data does not show any resolution or settings combination where the CPU's limitations would cap performance below what the GPU can deliver.

The memory bandwidth of 51.2 GB/s from dual-channel DDR4 is adequate for this configuration. The CPU's PCIe Gen 4 support (16 lanes) provides a fast interface to the GPU, although the GTX 1070 uses PCIe 3.0 x16, which is backward compatible and not a limiting factor. The data suggests that the Ryzen 5 3600 is a well-matched partner for the GTX 1070 in this game, as it provides sufficient compute headroom without being so fast that it exposes the GPU's weaknesses at lower resolutions.

FAQ

Q: What is the best resolution to play Hitman 2 with this combo for a smooth experience?

A: The data shows that 1920x1080 with Medium settings delivers 86.8 FPS, which is well above the 60 FPS threshold. At 2560x1440, only Low settings (77.7 FPS) and Medium settings (57.1 FPS) come close to or exceed 60 FPS. 3840x2160 is not recommended, as even Low settings only reach 39.6 FPS.

Q: How much of a performance drop does 4K cause compared to 1080p?

A: At High settings, the average frame rate drops from 67.5 FPS at 1920x1080 to 25.5 FPS at 3840x2160, a reduction of 42 FPS. At Low settings, the drop is from 116.8 FPS to 39.6 FPS, a reduction of 77.2 FPS. The relative penalty is larger at lower settings, indicating a resolution-bound GPU.

Q: Is the Ryzen 5 3600 or the GTX 1070 the limiting factor in this game?

A: The benchmark results indicate the GTX 1070 is the primary limiting component. Frame rates scale consistently with resolution, which is a hallmark of GPU-bound performance. The CPU's 6-core, 12-thread configuration and high boost clock (4.20 GHz) provide sufficient headroom, especially since the highest FPS recorded (116.8 at 1080p Low) does not show a CPU-induced plateau.

Q: How does this combo rank among all tested combinations for Hitman 2?

A: The combo ranks 1510 out of 1795 tested combinations. This places it in the lower-middle tier, which is consistent with the GTX 1070 being an older, mid-range GPU (percentile rank 51 among all GPUs) and the Ryzen 5 3600 being a solid but not top-tier CPU (percentile rank 76 among all CPUs).

Q: Which settings preset should I use at 1440p for the best balance?

A: At 2560x1440, Medium settings (57.1 FPS) offer the best balance between visual quality and playability. Low settings (77.7 FPS) are smoother but reduce visual fidelity. High settings (45 FPS) are borderline, and Ultra (33 FPS) is not recommended for a consistent experience.

Q: What is the difference in FPS between Low and Ultra settings at 1080p?

A: At 1920x1080, Low settings produce 116.8 FPS, while Ultra settings produce 48.9 FPS. The difference is 67.9 FPS, which shows a significant performance cost for the highest graphical preset. Medium settings (86.8 FPS) and High settings (67.5 FPS) sit between the two extremes.

How This Combo Ranks

The AMD Ryzen 5 3600 + NVIDIA GeForce GTX 1070 combination ranks 1510 out of 1795 tested combos in Hitman 2, placing it in the 16th percentile of all configurations. This is a low ranking that reflects the age and mid-range positioning of the GTX 1070, which was released in 2016 and is now end-of-life. The GPU's percentile rank among all GPUs is 51, meaning it sits near the median, but its average benchmark score of 12331 is only slightly above the NVIDIA Quadro K4200 (12241, delta 0.7%) and slightly below the NVIDIA GeForce GTX 880M (12490, delta -1.3%).

The CPU's ranking is more favorable. The Ryzen 5 3600 has a percentile rank of 76 among all CPUs, with an average benchmark score of 18129. Its nearest rival, the Intel Core i5-11400, scores 18150, a delta of -0.1%, making the two effectively identical in synthetic benchmarks. The AMD Ryzen 5 7535HS scores 18101, a delta of 0.2%, again a negligible difference. This means the CPU is not dragging down the combo's ranking; rather, the GPU is the weaker link.

The combo's rank of 1510 out of 1795 indicates that a significant majority of tested combos deliver better performance in Hitman 2. This is expected given the GTX 1070's age and the game's release in 2018, which means many newer GPUs have since entered the market. The data shows that the GTX 1070's passmark G3D score of 13498 is decent, but its DirectX 12 score of 48 is low, which may impact performance in modern titles that rely heavily on DX12 features.

The ranking also suggests that users with this combo should temper their expectations for high-resolution, high-settings play. The measured FPS data confirms that 4K Ultra is unplayable at 18.2 FPS, and even 1440p Ultra is marginal at 33 FPS. The combo is best suited for 1080p gaming, where it can achieve playable frame rates across all settings, and 1440p with reduced settings.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution and desired frame rate. For a 60 FPS target, the combo is best matched to 1920x1080 with High settings, which delivers 67.5 FPS. This preset provides a good balance of visual quality and performance, with enough headroom above 60 FPS to absorb minor frame time spikes. For a higher refresh rate display, 1080p Low (116.8 FPS) or Medium (86.8 FPS) are both viable, with Medium offering better visuals at a still-high frame rate.

At 2560x1440, the data shows that Low settings (77.7 FPS) are the only preset that comfortably exceeds 60 FPS. Medium settings (57.1 FPS) are close but may dip below 60 FPS in demanding scenes. High settings (45 FPS) and Ultra (33 FPS) are not recommended for a consistently smooth experience. For users who prioritize visual fidelity over frame rate, Medium at 1440p is the best compromise.

At 3840x2160, the data shows that no settings preset provides a playable experience. Low settings (39.6 FPS) are the highest achievable, and even that is below the 60 FPS threshold. Ultra settings (18.2 FPS) are effectively a slideshow. Users with a 4K display should either reduce the resolution to 1440p or accept that this combo is not suitable for 4K gaming in Hitman 2.

The overall recommendation is to use 1920x1080 with High settings as the default, as it provides the best balance of visual quality and performance across the measured rows. If frame rate is the top priority, 1080p Low or Medium are better choices. For 1440p users, Low settings are the only way to get close to 60 FPS, and Medium is a viable alternative for those willing to accept slightly lower frame rates.

Measured FPS Breakdown

The measured FPS data covers three resolutions and four settings presets, providing a complete picture of the combo's performance envelope.

At 1920x1080, the results are as follows:

  • Low: 116.8 FPS average
  • Medium: 86.8 FPS average
  • High: 67.5 FPS average
  • Ultra: 48.9 FPS average

The spread from Low to Ultra is 67.9 FPS, which is the largest of any resolution tested. This indicates that at 1080p, the settings preset has a major impact on performance, and the GPU is not yet fully saturated at the lower presets.

At 2560x1440, the results are:

  • Low: 77.7 FPS average
  • Medium: 57.1 FPS average
  • High: 45 FPS average
  • Ultra: 33 FPS average

The spread here is 44.7 FPS, which is smaller than at 1080p. This suggests that the GPU is becoming more of a limiting factor as resolution increases, but the settings still have a meaningful impact. The gap between Medium and High is 12.1 FPS, while the gap between High and Ultra is 12 FPS.

At 3840x2160, the results are:

  • Low: 39.6 FPS average
  • Medium: 29.7 FPS average
  • High: 25.5 FPS average
  • Ultra: 18.2 FPS average

The spread at 4K is 21.4 FPS, the smallest of all resolutions. This confirms that at 4K, the GPU is heavily saturated, and even lowering the settings from Ultra to Low only recovers 21.4 FPS. The performance is uniformly poor across all presets, with the highest average (Low at 39.6 FPS) still below the 60 FPS target.

Comparing the same settings across resolutions, the data shows consistent drops. For Low, the FPS goes from 116.8 (1080p) to 77.7 (1440p) to 39.6 (4K). For Medium, it goes from 86.8 to 57.1 to 29.7. For High, from 67.5 to 45 to 25.5. For Ultra, from 48.9 to 33 to 18.2. The percentage drops from 1080p to 4K are 66.1% for Low, 65.8% for Medium, 62.2% for High, and 62.8% for Ultra. These relatively similar percentages indicate that resolution scaling is the dominant factor, with settings having a secondary, albeit significant, effect.

Hardware Specifications

AMD Ryzen 5 3600

Cores / Threads 6 / 12
Base Clock 3600 MHz
Boost Clock 4200 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce GTX 1070

VRAM 8 GB GDDR5
Base Clock —
Boost Clock 1683 MHz MHz
TDP 150 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 3600 + NVIDIA GeForce GTX 1070 in Hitman 2

Resolution Settings Avg FPS
3840x2160 Low 39.6
3840x2160 Medium 29.7
3840x2160 High 25.5
3840x2160 Ultra 18.2
2560x1440 Low 77.7
2560x1440 Medium 57.1
2560x1440 High 45.0
2560x1440 Ultra 33.0
1920x1080 Low 116.8
1920x1080 Medium 86.8
1920x1080 High 67.5
1920x1080 Ultra 48.9

Hitman 2 with GTX 1070 + Other CPUs

See how Hitman 2 performs with the same GPU but different processors.

Other Games with Ryzen 5 3600 + GTX 1070

Explore FPS benchmarks for other games using this same hardware combination.