Barony
This combination provides smooth gameplay with an average of 110 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 38 | 47 | 59 | 77 |
| 1440p QHD | 69 | 95 | 112 | 146 |
| 1080p Full HD | 107 | 152 | 176 | 237 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with AMD Ryzen 5 3600 + NVIDIA GeForce GTX 1070, In-Depth Analysis
The AMD Ryzen 5 3600 and NVIDIA GeForce GTX 1070 pairing delivers a surprisingly capable Barony experience, with a clear trend: this is a GPU-limited combo at higher resolutions, but the CPU has enough headroom to push very high frame rates at 1080p. The data shows that the GTX 1070 is the primary constraint as resolution climbs, while the Ryzen 5 3600’s six cores and twelve threads prove more than adequate for this roguelike’s demands.
Resolution Scaling
The measured frame rates reveal a predictable, yet steep, drop as resolution increases. At 1920x1080 with Ultra settings, the combo averages 107.4 FPS. Moving to 2560x1440, that figure falls to 69.4 FPS, a reduction of 38 FPS. At 3840x2160, the average drops further to 37.6 FPS, which is just 35% of the 1080p Ultra result. This scaling pattern strongly indicates the GPU is the limiting factor at 4K; the GTX 1070’s 8 GB of GDDR5 memory and 256.3 GB/s bandwidth are being saturated by the higher pixel count. The CPU, meanwhile, is not the bottleneck, as evidenced by the 1080p results. At 1920x1080 with Low settings, the combo hits 237.4 FPS, and even at Medium settings it achieves 176.1 FPS. These high numbers suggest the Ryzen 5 3600 is capable of feeding the GPU well beyond what the GTX 1070 can render at lower resolutions. The gap between Low and Ultra settings at 1080p is 130 FPS, which is a massive swing, further confirming that graphical settings, not CPU throughput, dictate performance here. The data indicates that for smooth 4K play, you would need to drop to Low settings (77.2 FPS), but even then, the margin over the 60 FPS threshold is modest.
How This Combo Ranks
In the grand scheme of tested hardware, this pairing sits at rank 1424 out of 1702 combos for Barony. That places it in the lower half of the database, which might seem underwhelming given the playable frame rates. However, this ranking reflects the absolute performance ceiling, not the playability at specific settings. The combo’s 1080p High average of 152.2 FPS is well above the 60 FPS standard, suggesting that while it doesn’t top the charts, it delivers a smooth experience for most users. The rank is dragged down by the 4K Ultra result of 37.6 FPS, which is below the 60 FPS target. The Ryzen 5 3600’s individual benchmark percentile is 76, meaning it outperforms 76% of all CPUs in the database, but the GTX 1070’s percentile is 51, placing it right at the median for GPUs. This disparity highlights that the GPU is the weaker link in this pairing. Relative to its nearest rivals, the Ryzen 5 3600’s average benchmark score of 18129 is nearly identical to the Intel Core i5-11400 (18150, -0.1% delta) and the AMD Ryzen 5 1600 (18158, -0.2% delta). The GPU’s nearest competitor, the NVIDIA Quadro K4200, scores 12241 (0.7% delta), which is a negligible difference. In practice, this combo ranks where it does because the GPU’s mid-tier standing limits the overall package, even with a strong CPU.
GPU Role
The NVIDIA GeForce GTX 1070 is the workhorse here, and its specifications directly explain the measured results. With 8 GB of GDDR5 memory on a 256-bit bus, it provides 256.3 GB/s of bandwidth, which is sufficient for 1080p and 1440p but becomes strained at 4K. Its base clock of 1506 MHz and boost clock of 1683 MHz, combined with 1920 shading units, deliver a raw compute rating of 6.463 TFLOPS. The benchmark results show that the GPU’s performance scales predictably with settings. At 2560x1440, the jump from Low (146.3 FPS) to Ultra (69.4 FPS) is a 77 FPS drop, illustrating the cost of high-detail textures and effects. The GTX 1070’s PassMark G3D score of 13498 places it in the 51st percentile, which is a solid mid-range standing. Its nearest rival, the GTX 1650 SUPER, has an average score of 12504 (-1.4% delta), meaning the GTX 1070 is slightly faster. The GPU’s DirectX 12 score of 48 in PassMark is notably low, but Barony’s engine likely doesn’t rely heavily on that API. The 4K Ultra result of 37.6 FPS is the clearest indicator of the GPU’s limits; it simply doesn’t have enough pixel throughput for that workload. For a game like Barony, which is a roguelike with procedurally generated dungeons, the GPU’s role is to handle the rendering of environments and effects, and the data shows it does so competently up to 1440p.
Settings Recommendations
Based on the measured FPS rows, the optimal balance between visual quality and performance is the High preset at 2560x1440, which yields 94.5 FPS. This is well above the 60 FPS threshold and provides a substantial visual upgrade over Medium (112.1 FPS at 1440p). At 1920x1080, the Ultra preset (107.4 FPS) is the best choice for maximum fidelity, as it still clears the 60 FPS mark with headroom. If you prefer a higher frame rate at 1080p, the Medium preset (176.1 FPS) is a viable alternative, but the visual difference from Ultra is noticeable. For 4K gaming, the data suggests you must compromise. The Low preset at 3840x2160 (77.2 FPS) is the only way to maintain a playable frame rate above 60 FPS; Medium (58.7 FPS) and High (46.7 FPS) fall short of that target. The Ultra preset at 4K (37.6 FPS) is essentially unplayable for smooth action. Therefore, the recommendation is to prioritize High settings at 1440p for the best experience, or drop to Low at 4K if resolution is paramount.
FAQ
Q: What is the best resolution and settings combo for a smooth 60 FPS experience?
A: The data shows that 2560x1440 with High settings achieves 94.5 FPS, and 1920x1080 with Ultra settings achieves 107.4 FPS. Both are well above 60 FPS and provide high visual quality.
Q: Can this combo handle 4K gaming?
A: Yes, but only with significant settings reductions. At 3840x2160, the Low preset yields 77.2 FPS, which is above 60 FPS. Medium (58.7 FPS) and High (46.7 FPS) fall below the 60 FPS threshold.
Q: Is the CPU or GPU the limiting factor in this pairing?
A: The GPU is the primary bottleneck. The CPU’s benchmark percentile is 76, while the GPU’s is 51. At 1080p Low (237.4 FPS), the CPU can push far more frames than the GPU can render, confirming the GPU limits higher resolutions.
Q: How does the Ryzen 5 3600 compare to its closest rivals?
A: Its average benchmark score of 18129 is virtually identical to the Intel Core i5-11400 (18150, -0.1% delta) and the AMD Ryzen 5 1600 (18158, -0.2% delta). There is no meaningful performance difference.
Q: What is the highest FPS this combo can achieve?
A: The maximum measured average is 237.4 FPS, seen at 1920x1080 with Low settings. This shows the CPU’s capability, as the GPU is not stressed at this low resolution.
Q: Does the GTX 1070’s memory size matter for Barony?
A: The 8 GB of GDDR5 memory is sufficient at 1080p and 1440p. At 4K Ultra, the average FPS drops to 37.6, which suggests that memory bandwidth (256.3 GB/s) is being saturated by the higher pixel workload.
CPU Role
The AMD Ryzen 5 3600 provides a strong foundation for this combo, even if it’s not the star of the show. With 6 cores and 12 threads, it offers ample parallel processing power for Barony’s logic, which includes procedural generation and AI. Its base clock of 3.60 GHz and boost clock of 4.20 GHz deliver solid single-thread performance, as evidenced by its Cinebench R23 single-core score of 2124. The CPU’s 32 MB of shared L3 cache helps with data-heavy tasks, though the game’s requirements are modest. The benchmark results show that the CPU is never the limiting factor in this pairing. At 1920x1080 with Low settings, the combo hits 237.4 FPS, which is a frame rate that would require a very strong GPU to match. This suggests the Ryzen 5 3600 can feed the GTX 1070 more data than it can process. The CPU’s PassMark multithread score of 17700 places it in the 76th percentile, indicating it is a capable mid-range processor. Its nearest rivals, the Intel Core i5-11400 and AMD Ryzen 5 1600, have essentially identical average scores, confirming that the Ryzen 5 3600 is not a performance outlier. In Barony, the CPU’s role is to handle game logic and physics, and the data shows it does so without creating a bottleneck, even at high frame rates. The 3dmark_16_threads score of 4605 indicates good scaling across its 12 threads, which is beneficial for a game that may use multiple cores for background tasks. Overall, the Ryzen 5 3600 is a reliable partner that allows the GTX 1070 to be the primary determinant of visual quality and frame rate.
Hardware Specifications
AMD Ryzen 5 3600
NVIDIA GeForce GTX 1070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 3600 + NVIDIA GeForce GTX 1070 in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 77.2 |
| 3840x2160 | Medium | 58.7 |
| 3840x2160 | High | 46.7 |
| 3840x2160 | Ultra | 37.6 |
| 2560x1440 | Low | 146.3 |
| 2560x1440 | Medium | 112.1 |
| 2560x1440 | High | 94.5 |
| 2560x1440 | Ultra | 69.4 |
| 1920x1080 | Low | 237.4 |
| 1920x1080 | Medium | 176.1 |
| 1920x1080 | High | 152.2 |
| 1920x1080 | Ultra | 107.4 |
Barony with GTX 1070 + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with Ryzen 5 3600 + GTX 1070
Explore FPS benchmarks for other games using this same hardware combination.