Greedfall

The Intel Core i5-14600KF paired with the Intel Arc B580 delivers a consistent 60+ frames-per-second experience at 1080p and 1440p in Greedfall, though 4K requires careful settings management. Benchmark results show the Ultra preset is only viable at 1080p, where it averages 68.4 FPS, while 1440p and 4K Ultra drop to 45.2 FPS and 26.8 FPS respectively. The Medium preset offers the best balance of visual fidelity and performance, providing 118.2 FPS at 1080p, 80.1 FPS at 1440p, and 48.2 FPS at 4K. For users prioritizing smoothness over visuals, the Low preset pushes frame rates to 146.8 FPS at 1080p, 101.2 FPS at 1440p, and 61.1 FPS at 4K. The High preset sits between these extremes, delivering 103.1 FPS at 1080p, 70.6 FPS at 1440p, and 45.1 FPS at 4K. Given that the Ultra preset yields less than half the frame rate of Medium at 4K, this combination performs best with Medium or High settings, depending on resolution preference.

Settings Recommendations

The measured data indicates that Medium is the optimal preset for this hardware pairing. At 1920x1080, Medium achieves 118.2 FPS, which is 14.6% higher than High and 72.8% higher than Ultra. The gap widens at higher resolutions: at 2560x1440, Medium delivers 80.1 FPS versus 45.2 FPS for Ultra, a 77.2% improvement. At 3840x2160, Medium produces 48.2 FPS compared to 26.8 FPS for Ultra, making Ultra essentially unplayable at 4K. The Low preset, while providing the highest frame rates across all resolutions, sacrifices visual quality for marginal gains over Medium — the difference is 28.6 FPS at 1080p, 21.1 FPS at 1440p, and 12.9 FPS at 4K. For users with high-refresh displays, Low is the only preset that exceeds 100 FPS at 1440p, but Medium remains the recommended choice for its combination of 80+ FPS performance and improved visual detail. High settings are a viable alternative for users who prefer higher image quality, as it stays above 70 FPS at 1440p and above 45 FPS at 4K.

GPU Role

The Intel Arc B580’s specifications directly influence these results. With 12 GB of GDDR6 memory on a 192-bit bus delivering 456.0 GB/s bandwidth, the card has ample memory capacity for Greedfall’s textures at all tested resolutions. The GPU’s 2560 shading units, 160 texture mapping units, and 80 render output units operate at a boost clock of 2670 MHz, producing a pixel rate of 213.6 GPixel/s and a texture rate of 427.2 GTexel/s. The card’s FP32 performance of 13.67 TFLOPS supports the measured frame rates, though the data reveals a clear memory-bandwidth bottleneck at 4K Ultra. The 21 GB/s effective memory speed and 456.0 GB/s bandwidth are sufficient for 1080p and 1440p, but the 4K Ultra preset’s 26.8 FPS average suggests the GPU’s compute resources are overwhelmed by the increased pixel workload. The Arc B580’s 66th percentile ranking among all GPUs and its average benchmark score of 23021, which is 0.7% below the NVIDIA GeForce RTX 4060, position it as a mid-range performer. Its 3DMark Steel Nomad DX12 score of 3068 and Geekbench Vulkan score of 109672 indicate solid DirectX 12 and Vulkan support, relevant for Greedfall’s rendering requirements.

CPU Role

The Intel Core i5-14600KF provides substantial computational headroom for Greedfall. With 14 cores and 20 threads, the processor operates at a base clock of 3.50 GHz and a boost clock of 5.30 GHz, featuring 24 MB of shared L3 cache. The CPU’s Cinebench R23 multi-core score of 32889 and single-core score of 4643 demonstrate strong multi-threaded and single-threaded performance, with a 93rd percentile ranking across all CPUs. Geekbench scores of 15636 multi-core and 2778 single-core further confirm the processor’s capability. In Greedfall, an Action RPG that typically relies on single-core performance for game logic and multi-core for background tasks, the CPU’s 5.30 GHz boost clock ensures minimal bottlenecking at lower resolutions. The data supports this: at 1080p Low, the combination achieves 146.8 FPS, indicating the GPU is the limiting factor rather than the CPU. The processor’s nearest rivals include the Intel Core i5-14600K, which scores 0.4% higher on average, and the AMD Ryzen 9 5950X, which scores 0.6% higher. The 14600KF’s Raptor Lake architecture, built on Intel’s 10 nm process, provides sufficient single-thread performance to keep up with the Arc B580’s output at all tested settings. The CPU’s 125 W TDP and support for DDR4 and DDR5 memory offer flexibility, though memory bandwidth is not a limiting factor in these measurements.

How This Combo Ranks

This specific combination of the Intel Core i5-14600KF and Intel Arc B580 ranks 1315th out of 1705 tested combos in Greedfall, placing it in the 22.8th percentile of all tested configurations. This ranking reflects the GPU’s mid-range positioning rather than the CPU’s capabilities, as the processor ranks in the 93rd percentile while the GPU sits in the 66th percentile. The measured frame rates at 1080p — 146.8 FPS Low, 118.2 FPS Medium, 103.1 FPS High, and 68.4 FPS Ultra — demonstrate that the GPU becomes the primary constraint at higher settings. At 1440p, the combination maintains playable frame rates across all presets, with Low at 101.2 FPS and Ultra at 45.2 FPS. The 4K results show the most significant drop-off, with Ultra falling to 26.8 FPS, which is below the 30 FPS threshold typically considered minimum playability. The combo’s rank of 1315 out of 1705 indicates that while this pairing is not in the top tier for Greedfall, it outperforms roughly 77% of tested combinations. The GPU’s nearest rival, the NVIDIA GeForce RTX 4060, scores 0.7% higher in average benchmarks, suggesting that similar configurations with that GPU would rank slightly higher. Conversely, the AMD Radeon 760M scores 0.1% lower, indicating that this combination outperforms systems using that integrated GPU.

FAQ

Q: What is the best preset for 60 FPS gameplay at 1440p?

A: The Medium preset delivers 80.1 FPS at 2560x1440, which comfortably exceeds 60 FPS. The High preset also achieves 70.6 FPS, so both are viable, though Medium offers a 13.5% higher frame rate than High.

Q: Can this combination handle 4K resolution?

A: Yes, but with limitations. At 3840x2160, the Low preset averages 61.1 FPS, Medium averages 48.2 FPS, High averages 45.1 FPS, and Ultra drops to 26.8 FPS. Only the Low preset maintains 60 FPS at 4K.

Q: How does the Arc B580 compare to the RTX 4060?

A: The Arc B580 has an average benchmark score of 23021, which is 0.7% lower than the NVIDIA GeForce RTX 4060’s score of 23181. This indicates near-identical overall performance, though game-specific results may vary.

Q: What is the CPU’s performance relative to its nearest rival?

A: The Intel Core i5-14600KF has an average benchmark score of 49367, which is 0.4% lower than the Intel Core i5-14600K’s score of 49166. This places the 14600KF 0.4% behind the 14600K and 0.6% behind the AMD Ryzen 9 5950X.

Q: Is the Ultra preset ever recommended for this combo?

A: Only at 1080p, where Ultra averages 68.4 FPS. At 1440p and 4K, Ultra produces 45.2 FPS and 26.8 FPS respectively, making it unsuitable for smooth gameplay at those resolutions.

Q: What frame rate can users expect at 1080p with High settings?

A: The High preset at 1920x1080 averages 103.1 FPS, which is suitable for high-refresh-rate monitors. The Low preset achieves 146.8 FPS at the same resolution, offering a 42.4% improvement for competitive play.