Greedfall

The AMD Ryzen 5 5600F and NVIDIA GeForce RTX 4080 SUPER pairing in Greedfall presents a study in contrasting component generations. The CPU, a Zen 3 Vermeer part with 6 cores and 12 threads, operates with a base clock of 3.00 GHz and a boost clock of 4.00 GHz. It sits in the 85th percentile against all CPUs, with an average benchmark score of 36945. Its nearest rivals in benchmark scores are the Intel Core Ultra 5 225 (36938, 0% delta), AMD Ryzen 5 5500X3D (37018, -0.2%), AMD Ryzen AI 7 PRO 450 (37093, -0.4%), and Intel Core i9-12900T (37112, -0.5%). This indicates the 5600F is a solid mid-range performer, essentially tied with these alternatives in synthetic tests, though this game’s engine may respond differently to specific architectural traits.

The GPU, an RTX 4080 SUPER based on the Ada Lovelace architecture, is a different class of hardware. It features 16 GB of GDDR6X memory on a 256-bit bus, delivering 736.3 GB/s of bandwidth. Its boost clock is 2550 MHz. The card holds an 86th percentile ranking among all GPUs, with an average benchmark score of 54209. Its nearest rival is the standard RTX 4080 (54247, -0.1%), showing the SUPER variant is nearly identical in raw compute. The next rivals—AMD Radeon Pro W5700X (54828, -1.1%), AMD Radeon RX 6750 GRE 12 GB (55698, -2.7%), and AMD Radeon 8060S (55757, -2.8%)—are actually slightly ahead in the synthetic average, though this does not translate directly to Greedfall performance.

CPU Role — cores, clocks, and how they relate to this game's results

The Ryzen 5 5600F’s 6 cores and 12 threads are a conventional configuration for a 2025 release, but Greedfall is a 2019 title. The game’s engine was designed in an era when 4-core CPUs were the norm, so this processor provides ample logical processors for the game’s thread scheduling. The 32 MB of shared L3 cache is a notable asset, allowing the game’s world-streaming and NPC logic to stay resident on-die. The 3.00 GHz base clock is low by modern standards, but the 4.00 GHz boost clock is where the chip will spend most of its time under gaming loads. The data indicates the CPU is not the bottleneck in this pairing. At 1080p with Low settings, the combo delivers 311 FPS average. This is a massive frame rate that far exceeds the refresh rate of most monitors, and it suggests the CPU is capable of feeding the GPU at very high rates.

However, the CPU’s synthetic scores show it is only tied with the Intel Core Ultra 5 225 and slightly behind the Ryzen 5 5500X3D. In a game like Greedfall, which has large open areas and complex dialogue scenes, the CPU’s single-thread performance (Passmark single-thread score of 2872) is more relevant than its multi-thread score (19236). The game’s logic is often serial in nature, so the 4.00 GHz boost clock is the key figure. The data shows that when resolution increases, the average FPS drops significantly (e.g., from 311 FPS at 1080p Low to 131 FPS at 4K Low), which is the hallmark of a GPU-bound scenario. This means the CPU is delivering frames faster than the GPU can render them at higher resolutions. The processor’s 65 W TDP and dual-channel DDR4 memory support (51.2 GB/s bandwidth) are adequate for this workload, but they are not exceptional.

The 5600F’s performance is best understood through its percentile rank. Being in the 85th percentile means it outperforms the vast majority of CPUs in general tasks. Yet, its nearest rivals include the i9-12900T, which has more cores, and the Ryzen 5 5500X3D, which has 3D V-Cache. The fact that the 5600F matches these in average benchmark scores suggests that its high boost clock and efficient Zen 3 architecture compensate for its lower core count in most tasks. For Greedfall, this means the CPU will not hold back the RTX 4080 SUPER until very high frame rates are achieved. At 1080p Low, the 311 FPS average is likely near the CPU’s ceiling for this game, but it is far above the playable threshold. The data shows that the CPU role is to provide a stable platform, which it does, but it is clearly the junior partner in this duo.

GPU Role — VRAM, clocks, and how they relate to this game's results

The RTX 4080 SUPER is the dominant component in this system, and its specifications reflect its high-end positioning. The 16 GB of GDDR6X VRAM is crucial for Greedfall, a game that can consume significant memory at high resolutions and texture settings. Even at 4K Ultra, the game does not come close to exceeding this capacity, which means there is no performance penalty from memory swapping. The 736.3 GB/s memory bandwidth is more than sufficient for the game’s art assets, allowing the GPU to stream textures quickly. The 2550 MHz boost clock is a high figure, and it drives the card’s compute capabilities. The GPU’s Passmark G3D score of 34245 is a strong indicator of its raw rasterization power.

The GPU’s role is clearly illustrated by the resolution scaling data. At 4K Ultra, the combo delivers 59 FPS. At 4K High, it jumps to 93 FPS. This 34 FPS increase from Ultra to High is a direct result of the GPU’s workload reduction, showing that the card is fully utilized at these settings. The game is visually demanding at 4K, and the RTX 4080 SUPER is the component that determines the frame rate. The GPU’s nearest rival, the RTX 4080, is only 0.1% behind in synthetic benchmarks, so the SUPER’s performance in Greedfall is essentially what one would expect from a high-end Ada Lovelace card. The card’s 86th percentile ranking confirms its place near the top of the GPU hierarchy.

The GPU’s memory configuration also matters for the game’s future. Greedfall is not a VRAM-heavy title, but 16 GB ensures that the card will not be obsolete for this game even with mods or future patches. The 256-bit bus width is a standard high-end configuration, and it pairs well with the GDDR6X memory type. The GPU’s pixel rate of 285.6 GPixel/s and texture rate of 816.0 GTexel/s are theoretical maximums that the game will not reach, but they indicate the card’s capacity for high-resolution rendering. In this pairing, the GPU is the clear workhorse, and its performance at 4K High (93 FPS) is the best balance of quality and speed that the data supports.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data shows a clear pattern of scaling from 1080p to 4K. At Low settings, the average FPS drops from 311 at 1080p to 219 at 1440p, and then to 131 at 4K. This is a 58% drop from 1080p to 4K. At High settings, the drop is from 225 at 1080p to 156 at 1440p, and then to 93 at 4K, a 59% drop. At Medium settings, the drop is from 248 to 172 to 103, a 58% drop. At Ultra settings, the drop is from 144 to 100 to 59, a 59% drop. The consistency of these drops—all around 58-59%—is the key insight.

This uniform scaling across settings indicates that the limiting component is the GPU. If the CPU were the bottleneck, we would see a smaller drop from 1080p to 4K, because at 1080p the CPU might be limiting the frame rate. Instead, the FPS drops proportionally with the number of pixels being rendered, which is classic GPU-bound behavior. The RTX 4080 SUPER is working harder at each higher resolution, and the frame rate falls accordingly. For example, at 1080p Low, the 311 FPS average is likely high enough to approach the CPU’s limit, but the drop to 131 FPS at 4K Low shows that the GPU is now the limiting factor. The 4K Ultra result of 59 FPS is the lowest in the dataset, showing that the game’s highest settings are a heavy burden even for this GPU.

The data also shows that the difference between Medium and High settings is smaller than the difference between High and Ultra. At 4K, Medium averages 103 FPS, High averages 93 FPS, and Ultra averages 59 FPS. The jump from High to Ultra is a 34 FPS loss, while the jump from Medium to High is only a 10 FPS loss. This suggests that Ultra settings include a disproportionately expensive effect (likely shadow quality or draw distance) that taxes the GPU heavily. The resolution scaling confirms that this is a GPU-limited system, and any attempt to increase frame rates at 4K must involve reducing settings, not upgrading the CPU.

FAQ

Q: What is the best resolution for this combo to maintain a high refresh rate?

A: At 1440p High, the combo delivers an average of 156 FPS. This is the highest fidelity setting that exceeds 144 FPS, making it ideal for high-refresh monitors. At 1080p, all settings except Ultra exceed 200 FPS, so 1080p High (225 FPS) is also viable.

Q: How does the RTX 4080 SUPER compare to the standard RTX 4080 in this game?

A: The RTX 4080 SUPER has an average benchmark score of 54209, while the standard RTX 4080 scores 54247, a delta of -0.1%. This indicates the SUPER is functionally identical to the non-SUPER in synthetic tests, and their performance in Greedfall should be nearly identical.

Q: Is the Ryzen 5 5600F a bottleneck for the RTX 4080 SUPER?

A: The data suggests it is not a significant bottleneck. At 1080p Low, the combo achieves 311 FPS, which is very high. The FPS drops at higher resolutions are proportional to pixel count, indicating the GPU is the limiting factor. The CPU is only likely to limit performance at very high frame rates beyond the game’s typical usage.

Q: What is the difference in FPS between 4K High and 4K Ultra?

A: The 4K High preset averages 93 FPS, while the 4K Ultra preset averages 59 FPS. This is a 34 FPS difference, making Ultra a demanding setting that may require a lower refresh rate monitor or a willingness to accept sub-60 FPS drops.

Q: How does the Ryzen 5 5600F’s CPU benchmark score compare to its rivals?

A: The 5600F has an average score of 36945. Its nearest rival, the Intel Core Ultra 5 225, scores 36938 (0% delta). The AMD Ryzen 5 5500X3D scores 37018 (-0.2%), and the AMD Ryzen AI 7 PRO 450 scores 37093 (-0.4%). This shows the 5600F is statistically tied with these CPUs.

Q: What is the GPU’s percentile ranking among all GPUs?

A: The RTX 4080 SUPER is in the 86th percentile of all GPUs, with an average benchmark score of 54209. This places it in the top 14% of all graphics cards, which is consistent with its high performance in Greedfall.

How This Combo Ranks

The combination of the Ryzen 5 5600F and RTX 4080 SUPER is ranked 241st out of 2938 tested combos in Greedfall. This places it in the top 8.2% of all systems tested. This is a strong ranking, but it is not at the very top. The ranking is likely held back by the CPU, as the RTX 4080 SUPER is a top-tier GPU, but the 5600F is a mid-range processor. The data shows that the combo’s performance is excellent at 1440p and 1080p, with average FPS well above 144 at most settings. At 4K, the combo is still very playable, with High settings averaging 93 FPS.

The 241st rank out of 2938 means there are 240 combos that perform better. These are likely systems with faster CPUs, such as the Ryzen 7 or Core i7/i9 parts, paired with the RTX 4080 SUPER or better GPUs. However, the 5600F’s performance is sufficient to keep the combo in the top 10% of all tested systems. The ranking also indicates that the combo is not bottlenecked by the CPU in most scenarios, as the FPS at 1080p (225 High) is already very high. The rank is a holistic measure, and the data shows that this combo offers a high level of performance that will satisfy most users. The fact that it ranks 241st out of 2938 confirms the RTX 4080 SUPER’s power, even when paired with a more modest CPU.

Settings Recommendations

The measured data provides a clear picture of the best settings for this combo. For 1080p and 1440p, the High preset is the best choice for a balance of visual quality and performance. At 1080p, High averages 225 FPS, and at 1440p, it averages 156 FPS. These are excellent frame rates that will ensure smooth gameplay on any monitor. The Medium preset offers even higher frame rates (248 FPS at 1080p, 172 FPS at 1440p), but the visual quality difference between Medium and High is likely noticeable in Greedfall’s environments. The Ultra preset at 1080p (144 FPS) is also viable, but the jump to Ultra at 1440p (100 FPS) is a significant drop, making High the better option.

For 4K, the High preset is the recommended choice. It averages 93 FPS, which is above the 60 FPS threshold for smooth gameplay and is a significant improvement over the Ultra preset’s 59 FPS. The Medium preset at 4K averages 103 FPS, but the visual quality loss may not be worth the 10 FPS gain over High. The Low preset at 4K averages 131 FPS, but it would likely make the game look dated. Therefore, the optimal strategy is to use High settings at 4K, as it provides the best visual fidelity while maintaining a high frame rate. If a user has a 120 Hz or 144 Hz 4K monitor, they may need to drop to Medium to get closer to those refresh rates, but for most users, High is the sweet spot. The data shows that the Ultra preset is not practical for this combo at 4K, as it drops below 60 FPS, which can lead to stuttering in a fast-paced action RPG.