Fortnite

The AMD Ryzen 5 5600F and Intel Arc B570 pairing delivers a playable Fortnite experience, but the data reveals a setup that is heavily constrained by its graphics card at higher resolutions. At 1080p, the combination shows respectable speed, yet it falls behind significantly as pixel counts rise, placing it in the lower half of tested system combinations for this title.

Resolution Scaling

The measured FPS data shows a steep and consistent performance cliff as resolution increases from 1920x1080 to 3840x2160. At High settings, the average frame rate drops from 96 FPS at 1080p to 61 FPS at 1440p, then falls sharply to 32 FPS at 4K. This represents a 33% reduction from 1080p to 1440p and a further 48% reduction from 1440p to 4K, leaving the system at just one-third of its 1080p performance when running at 4K.

The scaling pattern across settings tells a clear story about the limiting component. At Low settings, the system achieves 176 FPS at 1080p, which drops to 112 FPS at 1440p and 59 FPS at 4K. The fact that even at Low settings the 4K frame rate is only 59 FPS—below the 60 FPS threshold—indicates the GPU is the primary bottleneck, as a CPU-limited scenario would show less dramatic differences between resolutions.

The gap between Low and Ultra settings widens dramatically at higher resolutions. At 1080p, the difference between Low (176 FPS) and Ultra (64 FPS) is 112 FPS. At 1440p, that spread narrows to 72 FPS (112 vs 40). At 4K, the difference compresses further to 38 FPS (59 vs 21). This compression is a classic sign of GPU saturation—when the graphics card is overwhelmed, quality settings matter less because the render pipeline is already maxed out.

Medium settings provide the only complete data set with min and max frame times, offering insight into frame pacing. At 1080p Medium, the system averages 124 FPS with a range from 106 to 143 FPS. At 1440p Medium, the average drops to 79 FPS with a tighter range of 67 to 91 FPS. The 4K Medium result shows 42 FPS average with a range of 35 to 48 FPS. The consistency of the frame ranges suggests the system maintains stable output without major stutters, even when performance is low.

CPU Role

The Ryzen 5 5600F is a 6-core, 12-thread processor based on the Zen 3 architecture, running on the AM4 socket. Its base clock is 3.00 GHz with a boost clock of 4.00 GHz. The processor draws 65 W TDP and supports DDR4 memory in dual-channel configuration with 51.2 GB/s bandwidth. This is a modern mid-range CPU with a 7 nm process node from TSMC.

Benchmark data shows this CPU performs strongly relative to its peers. Its PassMark multithread score is 19,236, with a single-thread score of 2,872. The average benchmark score of 36,945 places it in the 85th percentile of all CPUs tested. Its nearest rivals include the Intel Core Ultra 5 225 (36,938, 0% delta), AMD Ryzen 5 5500X3D (37,018, -0.2% delta), AMD Ryzen AI 7 PRO 450 (37,093, -0.4% delta), and Intel Core i9-12900T (37,112, -0.5% delta). The 5600F sits essentially at parity with all of these, within half a percent either way.

In Fortnite specifically, the CPU appears sufficient for the frame rates observed. At 1080p Low, the system reaches 176 FPS, which indicates the processor can feed the GPU with enough draw calls to sustain high refresh rates. However, the fact that 1080p Ultra drops to 64 FPS suggests that while the CPU itself is not the primary limitation, the overall system cannot maintain high frame rates with maximum visual fidelity, even at the lowest resolution tested.

The CPU's 32 MB of shared L3 cache is a notable asset for gaming workloads, and the 4.00 GHz boost clock provides adequate single-thread performance for Fortnite's engine. The processor's floating-point math score of 34,548 and integer math score of 59,339 indicate solid general-purpose compute capability that supports physics and game logic without becoming a bottleneck in this title.

How This Combo Ranks

The combination of the Ryzen 5 5600F and Arc B570 ranks 2,178 out of 2,740 tested system combinations for Fortnite. This places it in the bottom 21% of all tested combos, which is a surprisingly low position given the individual components' percentile rankings. The CPU sits in the 85th percentile and the GPU in the 65th percentile, yet their combined position suggests the pairing does not punch above its weight in this specific game.

The low combo rank likely reflects that Fortnite's performance at higher settings and resolutions is dominated by GPU capability, and the Arc B570's 65th percentile score is not enough to compete with higher-end graphics cards in the database. Additionally, the measured FPS data shows that even at 1080p, the system does not approach the extremes of performance that top-tier combos achieve—the 176 FPS at Low settings is respectable but far from the 300+ FPS that high-end systems can deliver in this title.

When interpreting this rank, it is important to note that the database includes all combinations of CPUs and GPUs, including those with much more powerful components. A rank of 2,178 out of 2,740 means the majority of tested systems outperform this combo, but it also means the system is not at the very bottom. For a mid-range CPU paired with a mid-range GPU, this result is consistent with expectations, though the data suggests Fortnite's optimization favors systems with stronger graphics cards.

Measured FPS Breakdown

At 1920x1080, the system delivers its best performance across all settings. Low settings produce an average of 176 FPS, which is suitable for high-refresh-rate monitors. Medium settings yield 124 FPS average with a minimum of 106 and maximum of 143 FPS. High settings drop to 96 FPS average, and Ultra settings bring the average down to 64 FPS. The 1080p results show that the system is capable of smooth gameplay at competitive settings, but Ultra settings will not fully utilize a 144 Hz display.

Moving to 2560x1440, performance drops noticeably. Low settings average 112 FPS, still playable for most users. Medium settings average 79 FPS with a range of 67 to 91 FPS. High settings fall to 61 FPS average, and Ultra settings drop to 40 FPS. At 1440p, the system can handle Low and Medium settings comfortably, but High settings are borderline, and Ultra is not recommended for smooth play.

At 3840x2160, the system struggles to maintain playable frame rates. Low settings average 59 FPS, just under the 60 FPS target. Medium settings average 42 FPS with a range of 35 to 48 FPS. High settings drop to 32 FPS, and Ultra settings average only 21 FPS. The 4K results indicate that this combination is not suited for 4K gaming in Fortnite, as even Low settings barely reach playability.

The Medium settings data provides the only complete min/max information across all resolutions. At 1080p, the 106-143 FPS range shows a 37 FPS spread. At 1440p, the 67-91 FPS range shows a 24 FPS spread. At 4K, the 35-48 FPS range shows a 13 FPS spread. The narrowing range at higher resolutions indicates the GPU is working at its limit, reducing the variation between frames as it consistently operates near its maximum capacity.

GPU Role

The Intel Arc B570 is built on the Xe2-HPG architecture (Battlemage generation) using a 5 nm process from TSMC. It features 2,304 shading units, 144 texture mapping units, and 80 render output units, along with 18 ray tracing cores. The GPU has 10 GB of GDDR6 memory on a 160-bit bus, providing 380.0 GB/s of bandwidth. Its base and boost clocks are both 2500 MHz, with memory running at 2375 MHz (19 Gbps effective).

The GPU's compute capabilities include 11.52 TFLOPS of FP32 performance and 23.04 TFLOPS of FP16 performance. The pixel rate is 200.0 GPixel/s and the texture rate is 360.0 GTexel/s. The card has a TDP of 150 W with a suggested PSU of 450 W. It uses a PCIe 4.0 x8 interface and supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4.

Benchmark results show the Arc B570 has an average score of 20,556, placing it in the 65th percentile of all GPUs. Its nearest rivals are the NVIDIA GeForce RTX 3070 Mobile (20,534, 0.1% delta), Intel Arc A750 (20,582, -0.1% delta), NVIDIA Quadro M4000M (20,480, 0.4% delta), and AMD Radeon R9 M390X (20,662, -0.5% delta). The GPU sits at near-parity with all of these, within half a percent.

In Fortnite, the GPU's performance directly explains the resolution scaling observed in the measured FPS data. The 10 GB VRAM capacity is sufficient for 1080p and 1440p at all settings, and the 380 GB/s bandwidth is adequate for the data throughput required. However, the 160-bit memory bus and 80 ROPs limit the fill rate at 4K, which is why the system falls below 60 FPS even at Low settings. The GPU is clearly the limiting factor at 4K, while at 1080p it is capable of delivering high frame rates, indicating a balanced pairing with the CPU at lower resolutions.

FAQ

Q: What is the highest average FPS this combo achieves in Fortnite?

A: The highest average FPS is 176 at 1920x1080 resolution with Low settings. Medium settings at 1080p achieve 124 FPS, while High and Ultra produce 96 FPS and 64 FPS respectively.

Q: Can this system run Fortnite at 4K resolution?

A: At 3840x2160, the system averages 59 FPS on Low settings, 42 FPS on Medium, 32 FPS on High, and 21 FPS on Ultra. Only Low settings approach playable frame rates, and none exceed 60 FPS.

Q: How does the Ryzen 5 5600F compare to its nearest CPU rivals?

A: The CPU's average benchmark score of 36,945 is within 0.5% of the Intel Core Ultra 5 225 (36,938), AMD Ryzen 5 5500X3D (37,018), AMD Ryzen AI 7 PRO 450 (37,093), and Intel Core i9-12900T (37,112). Performance is effectively identical across these chips.

Q: What is the combo's overall ranking among tested systems for Fortnite?

A: The combination ranks 2,178 out of 2,740 tested system combinations. This places it in the lower portion of the database, indicating that most other CPU-GPU pairings deliver better Fortnite performance.

Q: Does the Arc B570 have enough VRAM for Fortnite?

A: The GPU has 10 GB of GDDR6 memory with 380.0 GB/s bandwidth. The measured FPS data shows no indication of VRAM-related stuttering or crashes at any tested resolution or settings level, suggesting the memory capacity is sufficient for this game.

Q: What is the best settings configuration for a 144 Hz monitor?

A: For a 144 Hz display at 1080p, Low settings (176 FPS) are the only option that fully saturates the refresh rate. Medium settings (124 FPS) will work but leave headroom unused. At 1440p, only Low settings (112 FPS) come close to 144 Hz, while Medium (79 FPS) is better suited for a 75 Hz monitor.