Fivem

The Intel Core i7-14700KF paired with the NVIDIA GeForce RTX 5090 D delivers exceptional performance in Fivem, ranking 15th out of 3707 tested combos. This places the configuration in the top 0.4% of all systems benchmarked for this multiplayer title, demonstrating that this pairing is among the most capable available. The data indicates a system that is overwhelmingly GPU-bound at higher resolutions, while the 20-core processor provides sufficient headroom to drive extreme frame rates at 1080p. The measured results show a clear hierarchy where resolution scaling has a profound impact on performance, with the RTX 5090 D capable of producing over 390 FPS at 1080p Low settings, yet dropping to 72 FPS at 4K Ultra.

Resolution Scaling

The frame rate data reveals a steep performance curve as resolution increases, with the RTX 5090 D showing its dominance at lower resolutions and encountering limitations at 4K. At 1920x1080 with Low settings, the system achieves an average of 394 FPS, which drops to 265 FPS at 2560x1440 and further to 147 FPS at 3840x2160. This represents a 63% reduction in frame rate when moving from 1080p to 4K at Low settings, indicating that the GPU is becoming the primary limiting factor as pixel count increases.

The scaling pattern shifts notably at Ultra settings, where the frame rates are 197 FPS at 1080p, 130 FPS at 1440p, and 72 FPS at 4K. This shows a 63% decrease from 1080p to 4K at Ultra, similar to the Low settings trend, but the absolute numbers are substantially lower due to the increased graphical workload. The 4K Ultra result of 72 FPS suggests that this combination, while powerful, does not maintain high refresh rate performance at maximum settings and resolution.

Medium settings provide the most complete data set, with minimum and maximum FPS recorded at each resolution. At 1080p Medium, the system averages 317 FPS with a range of 270 to 365 FPS. Moving to 1440p Medium, the average drops to 209 FPS with a range of 178 to 240 FPS. At 4K Medium, the average is 116 FPS with a range of 99 to 133 FPS. These measurements show that the frame time consistency remains solid across resolutions, with the gap between minimum and maximum FPS staying relatively proportional to the average.

The resolution scaling data indicates that at 1080p, the Core i7-14700KF is able to feed the RTX 5090 D adequately, as demonstrated by the 394 FPS Low result. However, the diminishing returns between 1440p and 4K suggest that the GPU's compute capabilities become the bottleneck at higher pixel counts. The 4K High result of 93 FPS versus the 4K Medium result of 116 FPS shows that even modest settings changes at 4K have significant performance implications, with a 20% frame rate penalty for the High preset.

FAQ

Q: What is the best resolution for high refresh rate gaming with this combo?

A: The 1920x1080 resolution with Low settings delivers the highest average FPS at 394, while 2560x1440 with Medium settings provides an average of 209 FPS. For a balance of visual quality and performance, 1440p Medium offers strong frame rates, whereas 4K Ultra drops to 72 FPS.

Q: How does the RTX 5090 D compare to its nearest rivals in synthetic benchmarks?

A: The RTX 5090 D has an average benchmark score of 77712, which is 1.1% higher than the AMD Radeon RX 6650M XT (76904) and 1.6% lower than the AMD Radeon RX 6850M XT (78940). It also trails the NVIDIA Tesla P100 PCIe 12 GB by 2.1% and the Tesla P100 PCIe 16 GB by 2.4%.

Q: What is the CPU's performance standing relative to other processors?

A: The Intel Core i7-14700KF achieves a 94th percentile ranking among all CPUs, with an average benchmark score of 70163. It outperforms the AMD Ryzen 7 9700F by 0.2%, the AMD Ryzen 9 7940HX by 0.4%, and the AMD Ryzen 9 7950X by 0.9%, while being 1% slower than the Intel Core Ultra 7 265K.

Q: Does the system maintain consistent frame rates in Fivem?

A: The Medium settings measurements show good frame time consistency, with a minimum of 270 FPS at 1080p and 99 FPS at 4K. The difference between minimum and maximum FPS at 1080p Medium is 95 FPS, while at 4K Medium it is 34 FPS, indicating tighter frame pacing at higher resolutions.

Q: How does the combo rank among all tested configurations?

A: The Intel Core i7-14700KF with NVIDIA GeForce RTX 5090 D ranks 15th out of 3707 tested combos in Fivem, placing it in the top percentile of all systems benchmarked for this game.

Q: What are the CPU's multi-threaded capabilities in Cinebench?

A: The processor scores 44167 in Cinebench R23 multi-core and 18550 in Cinebench R20 multi-core. It also achieves 4452 in Cinebench R15 multi-core and 52425 in Passmark multi-thread tests, demonstrating strong parallel processing capability.

CPU Role

The Intel Core i7-14700KF features 20 cores and 28 threads, built on Raptor Lake architecture with a 10 nm process node. Its base clock runs at 3.40 GHz with a boost clock of 5.60 GHz, providing the single-thread performance that Fivem's multiplayer environments often require. The processor includes 33 MB of shared L3 cache and 2 MB of L2 cache per core, with 80 KB of L1 cache per core. This cache hierarchy supports the frequent entity interactions and world streaming common in Fivem's large multiplayer sessions.

Cinebench R23 results show a single-core score of 6235 and a multi-core score of 44167, indicating that the CPU's 5.60 GHz boost clock delivers exceptional single-threaded performance while the 20 cores provide substantial multi-threaded throughput. The Geekbench scores of 2578 single-core and 21462 multi-core reinforce this dual strength. In Passmark tests, the processor achieves 4480 in single-thread and 52425 in multi-thread, with strong results in integer math (183056) and floating point math (134393).

The CPU's role in Fivem becomes evident when examining the frame rate data. At 1080p Low, the system reaches 394 FPS, which requires the processor to handle game logic and physics at a rapid pace. The 20-core configuration with 28 threads allows the CPU to manage multiple concurrent tasks, such as network synchronization and script execution, without becoming a bottleneck. However, the CPU's percentile ranking of 94 and its proximity to rivals like the AMD Ryzen 7 9700F (0.2% faster) suggest that while it is a top-tier processor, it is not the absolute fastest available.

The Passmark data compression score of 694963 and data encryption score of 40046 show the processor's ability to handle memory-intensive workloads, which can be relevant in Fivem's streaming of assets. The extended instructions score of 40660 and find prime numbers score of 212 further demonstrate the CPU's computational versatility. With a TDP of 125 W and support for both DDR4 and DDR5 memory, the i7-14700KF provides a balanced platform for multiplayer gaming.

How This Combo Ranks

The combination of Intel Core i7-14700KF and NVIDIA GeForce RTX 5090 D achieves a rank of 15 out of 3707 tested combos in Fivem, placing it in the 99.6th percentile of all configurations. This ranking reflects the exceptional performance of both components, with the GPU's 92nd percentile standing among all GPUs and the CPU's 94th percentile among all CPUs. The top-tier ranking is consistent with the measured frame rates, which show the system capable of exceeding 390 FPS at lower settings.

The GPU's average benchmark score of 77712 places it in a close competitive group, with the AMD Radeon RX 6650M XT just 1.1% behind and the AMD Radeon RX 6850M XT 1.6% ahead. This narrow margin between rivals suggests that the GPU's performance in Fivem is not solely determined by raw compute, but also by other factors such as driver optimization and memory bandwidth. The RTX 5090 D's 32 GB of GDDR7 memory on a 512-bit bus provides 1.79 TB/s of bandwidth, which may contribute to its strong showing at high resolutions.

The CPU's ranking among its rivals shows a similar pattern, with the Intel Core Ultra 7 265K being 1% faster and the AMD Ryzen 9 7950X being 0.9% slower. This tight grouping among top-tier processors indicates that the CPU choice has less impact on Fivem performance than the GPU selection, especially at higher resolutions where the GPU becomes the limiting factor. The combo's 15th place ranking out of 3707 demonstrates that this configuration is among the most effective for this game, though not the absolute best.

The data shows that the combo's ranking is influenced by both components' ability to work together effectively. At 1080p Low, the system achieves 394 FPS, which is likely near the practical limits of the game engine and display refresh rates. At 4K Ultra, the 72 FPS result is more modest but still above the 60 FPS threshold for smooth gameplay. The combo's high ranking suggests that it handles Fivem's unique demands, which often involve large player counts and complex scripting, better than most other configurations.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates across all settings. Low settings produce an average of 394 FPS, Medium settings yield 317 FPS with a range of 270 to 365 FPS, High settings achieve 254 FPS, and Ultra settings reach 197 FPS. The difference between Low and Ultra at 1080p is 197 FPS, representing a 50% performance drop for maximum visual quality. This resolution shows the RTX 5090 D's ability to render at extremely high frame rates when the CPU can keep up with the GPU.

At 2560x1440, the frame rates decrease but remain high. Low settings average 265 FPS, Medium settings average 209 FPS with a range of 178 to 240 FPS, High settings achieve 167 FPS, and Ultra settings reach 130 FPS. The transition from 1080p to 1440p results in a 33% decrease at Low settings and a 34% decrease at Ultra settings. This consistent reduction suggests that the GPU's pixel throughput is the primary factor at these resolutions.

At 3840x2160, the system shows its most significant performance drop. Low settings average 147 FPS, Medium settings average 116 FPS with a range of 99 to 133 FPS, High settings achieve 93 FPS, and Ultra settings reach 72 FPS. The 4K results demonstrate that while the RTX 5090 D is capable of 4K gaming, the demands of Ultra settings at this resolution push the system to its limits. The minimum FPS of 99 at 4K Medium indicates that even at this resolution, the system maintains playable frame rates.

The Medium settings data provides the most complete picture, with both minimum and maximum FPS recorded at all three resolutions. The 1080p Medium range of 270 to 365 FPS shows a 95 FPS spread, the 1440p Medium range of 178 to 240 FPS shows a 62 FPS spread, and the 4K Medium range of 99 to 133 FPS shows a 34 FPS spread. This narrowing range at higher resolutions indicates more consistent frame times when the GPU is more heavily loaded.

Settings Recommendations

For players seeking the highest possible frame rates, the 1080p Low preset delivers an average of 394 FPS, which is ideal for competitive play or high refresh rate displays. This setting maximizes the GPU's potential and provides the smoothest experience, though it sacrifices visual fidelity. The 1080p Medium preset at 317 FPS offers a better balance, with only a 20% performance penalty compared to Low while providing improved graphics.

At 1440p, the Medium preset stands out as the best combination of performance and visual quality, delivering 209 FPS with a minimum of 178 FPS. This ensures that even demanding scenes maintain high frame rates. The High preset at 167 FPS is also viable for 1440p gaming, while the Ultra preset at 130 FPS may be preferable for those prioritizing image quality over frame rate.

For 4K gaming, the Medium preset provides the best experience with 116 FPS average and a 99 FPS minimum, ensuring smooth gameplay. The High preset at 93 FPS is still playable but approaches the threshold where frame pacing may become noticeable. The Ultra preset at 72 FPS is best reserved for scenarios where visual quality is paramount and the player does not require high refresh rates.

The measured data suggests that the optimal settings depend heavily on the target resolution and display capabilities. For 1080p displays with 240 Hz refresh rates, High settings at 254 FPS provide an excellent experience. For 1440p 165 Hz displays, Medium settings at 209 FPS are recommended. For 4K 120 Hz displays, Medium settings at 116 FPS are the best choice, as they stay above the 100 FPS threshold while maintaining good visual quality.