Fivem
This combination offers playable performance with an average of 30 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 14 | 15 | 19 | 20 |
| 1440p QHD | 21 | 27 | 30 | 41 |
| 1080p Full HD | 29 | 36 | 51 | 62 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Fivem with Intel Core i5-14600K + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis
The Intel Core i5-14600K paired with the NVIDIA GeForce GTX 1050 Ti presents a stark study in system imbalance within Fivem. The data shows a processor capable of immense computational throughput, matched with a graphics card from a previous era, resulting in a combination that ranks near the very bottom of all tested configurations. This pairing produces playable frame rates only under the most restrictive graphical settings, and the benchmark results clearly illustrate where the bottleneck lies.
Resolution Scaling
The measured FPS data reveals a predictable but severe decline in performance as resolution increases, pointing directly to the GPU as the limiting component. At 1920x1080 with Low settings, the system achieves an average of 62.2 FPS. Moving to 2560x1440 at the same settings, the average drops to 40.6 FPS, a significant reduction of roughly 35%. At 3840x2160, the average falls further to 20.1 FPS, which is less than one-third of the 1080p figure.
This scaling pattern is characteristic of a GPU-bound scenario. The GTX 1050 Ti, with its 4 GB of GDDR5 memory and 128-bit bus, is being tasked with rendering an increasing number of pixels. The drop from 1080p to 1440p is steep, and the jump to 4K is catastrophic for playability. The data suggests that the i5-14600K is not the limiting factor here; the CPU has ample headroom to feed frames, but the GPU simply cannot process them fast enough at higher resolutions. The FPS difference between 1440p and 4K is smaller than the gap between 1080p and 1440p, indicating that the GPU is already saturated and its performance is collapsing under the pixel load.
CPU Role
The Intel Core i5-14600K is a modern 14-core processor with 20 threads, a boost clock of 5.30 GHz, and 24 MB of shared L3 cache. Its benchmark scores are formidable, including a Cinebench R23 multi-core score of 32881 and a single-core score of 4642. The data shows this CPU sits in the 93rd percentile of all CPUs, and its average benchmark score of 49166 is nearly identical to the AMD Ryzen 9 5950X, which scores 49062 with a deltaPct of 0.2.
In this Fivem configuration, the CPU's role is to maintain a high minimum frame rate and handle game logic, but the GPU's limitations prevent it from ever being stressed. At 1080p Low, the system reaches 62.2 FPS, which is likely a cap imposed by the GPU's rendering speed rather than the CPU's processing power. The i5-14600K is capable of far higher frame rates; the data implies that in a more balanced system, this CPU would not be the bottleneck. Its high single-thread performance, evidenced by the Geekbench single-core score of 2803, is well-suited for a game like Fivem, which often relies on single-threaded performance for server communication and world simulation. However, the GTX 1050 Ti is unable to translate this CPU potential into higher FPS.
How This Combo Ranks
The combination rank for this pairing in Fivem is 1768 out of 1792 tested combos. This places it in the bottom 1.3% of all configurations, a stark indicator of its performance ceiling. The data suggests that this is an extremely low-performing combo for this game, largely due to the GPU's age and limited capabilities.
The GPU's percentile ranking is 30th, and its average benchmark score of 5316 is nearly identical to the NVIDIA GeForce 930A (score 5317, deltaPct 0) and the NVIDIA GeForce 940M (score 5297, deltaPct 0.4). This places the GTX 1050 Ti in the company of entry-level mobile and desktop parts from years ago. Conversely, the CPU ranks in the 93rd percentile, creating a massive disparity in capability. The data indicates that the combo's rank is dragged down almost entirely by the GPU. The CPU is a top-tier performer, but the overall system performance is anchored by a GPU that is end-of-life and outperformed by even the most modest modern parts.
Measured FPS Breakdown
The measured FPS data provides a clear view of the system's capabilities across different resolutions and settings. At 1920x1080, the system is marginally playable. The Low preset delivers an average of 62.2 FPS, which is the only setting that approaches a smooth experience. The Medium preset achieves 50.7 FPS, while High drops to 35.7 FPS. The Ultra preset is the worst performer at 1080p, with an average of 29.4 FPS.
At 2560x1440, the performance becomes marginal for most settings. The Low preset yields 40.6 FPS, which is acceptable for slower-paced gameplay. Medium drops to 30 FPS, High falls to 27.2 FPS, and Ultra is nearly unplayable at 21.1 FPS. The jump to 3840x2160 makes the game essentially unplayable across all settings. The Low preset manages 20.1 FPS, Medium 19.3 FPS, High 15.3 FPS, and Ultra 14.1 FPS. The data shows a consistent pattern: the GTX 1050 Ti is overwhelmed at 4K, and even the most aggressive settings reduction cannot bring the frame rate into a playable range. The only configuration that offers a consistently smooth experience is 1080p with Low settings.
FAQ
Q: What is the best average FPS this combo can achieve in Fivem?
A: The highest measured average FPS is 62.2, achieved at 1920x1080 with the Low preset.
Q: Is the Intel Core i5-14600K the reason for the low frame rates?
A: No. The data shows the CPU is a high performer (93rd percentile), while the GPU is a low performer (30th percentile). The FPS scaling with resolution indicates the GPU is the limiting factor.
Q: How does this combo rank compared to others tested?
A: It ranks 1768 out of 1792 tested combos, placing it in the bottom 1.3% of all configurations.
Q: Can this system handle 4K gaming in Fivem?
A: No. The highest average FPS at 3840x2160 is 20.1 FPS on Low settings, which is not playable. All other settings at this resolution produce lower averages.
Q: What is the difference in FPS between the Low and Ultra presets at 1080p?
A: At 1920x1080, the Low preset averages 62.2 FPS, while the Ultra preset averages 29.4 FPS. This represents a drop of over 50% in performance when moving to the highest settings.
Q: Is the GTX 1050 Ti a strong performer in this game?
A: The data suggests no. Its average benchmark score of 5316 is nearly identical to the NVIDIA GeForce 930A and 940M, and it is only in the 30th percentile of all GPUs.
Settings Recommendations
Based on the measured data, the only viable preset for a smooth experience is 1920x1080 with Low settings, which yields an average of 62.2 FPS. This is the only configuration that exceeds the 60 FPS threshold. The Medium preset at 1080p, with an average of 50.7 FPS, is acceptable for those who prioritize visual quality over a high frame rate, but it is a compromise.
At 2560x1440, the Low preset is the only option that offers a playable frame rate, averaging 40.6 FPS. The Medium and High presets at this resolution are borderline, with averages of 30 and 27.2 FPS, respectively. The data clearly indicates that the Ultra preset should be avoided at all resolutions, as it consistently produces the lowest frame rates. The best experience per the measured rows is to play at 1080p on Low settings. If a higher resolution is desired, the user must accept the Low preset at 1440p and a sub-60 FPS experience.
GPU Role
The NVIDIA GeForce GTX 1050 Ti is the primary bottleneck in this configuration. Its specifications are from a bygone era: a base clock of 1291 MHz, a boost clock of 1392 MHz, 4 GB of GDDR5 memory, and a memory bandwidth of 112.1 GB/s. The GPU's benchmark scores confirm its low standing; its Passmark G3D score is 6340, and its 3DMark Steel Nomad DX12 score is a mere 305.
The data shows that the GPU is the limiting factor at all resolutions and settings. The FPS scaling with resolution is a classic sign of a GPU that is running out of pixel throughput and memory bandwidth. The 4 GB VRAM is also a concern, as it is likely insufficient for high-resolution textures, causing stuttering or texture pop-in. The GPU's percentile rank of 30 places it below the vast majority of modern graphics cards. When compared to its nearest rivals, it is nearly identical in performance to the NVIDIA GeForce 930A (deltaPct 0) and the NVIDIA GeForce 940M (deltaPct 0.4). The data confirms that the GTX 1050 Ti is a legacy part that severely limits the potential of the i5-14600K, rendering the CPU's power largely irrelevant in this game.
Hardware Specifications
Intel Core i5-14600K
NVIDIA GeForce GTX 1050 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-14600K + NVIDIA GeForce GTX 1050 Ti in Fivem
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 20.1 |
| 3840x2160 | Medium | 19.3 |
| 3840x2160 | High | 15.3 |
| 3840x2160 | Ultra | 14.1 |
| 2560x1440 | Low | 40.6 |
| 2560x1440 | Medium | 30.0 |
| 2560x1440 | High | 27.2 |
| 2560x1440 | Ultra | 21.1 |
| 1920x1080 | Low | 62.2 |
| 1920x1080 | Medium | 50.7 |
| 1920x1080 | High | 35.7 |
| 1920x1080 | Ultra | 29.4 |
Fivem with ii5-14600K + Other GPUs
See how Fivem performs with the same CPU but different graphics cards.
Fivem with GTX 1050 Ti + Other CPUs
See how Fivem performs with the same GPU but different processors.
Other Games with ii5-14600K + GTX 1050 Ti
Explore FPS benchmarks for other games using this same hardware combination.