Fivem

Fivem presents a unique benchmarking challenge because its performance is heavily influenced by server-side code and the actions of other players, making measured results particularly sensitive to the CPU. This analysis examines the Intel Core i5-10400F paired with the NVIDIA GeForce RTX 5070 Ti, a combination that pits a 10th-generation six-core processor against a current-generation flagship GPU. The data reveals a system where the CPU consistently limits frame rates, especially at lower resolutions, while the GPU's immense power only becomes fully utilized at 4K ultra settings.

Resolution Scaling

The measured FPS data shows a clear and dramatic scaling pattern as resolution increases, which strongly indicates a CPU bottleneck at lower settings. At 1080p with Low settings, the combo achieves an average of 225.8 FPS. Moving to 1440p Low drops this to 194.3 FPS, and at 4K Low, the average falls to 114.2 FPS. This scaling suggests that even at 4K, the i5-10400F is still able to feed the GPU enough data to see a significant performance hit from the increased pixel count.

However, the picture changes when examining higher graphics presets. At Ultra settings, the frame rate drops from 155.7 FPS at 1080p to 101.7 FPS at 1440p, and then plummets to 53.9 FPS at 4K. The 4K Ultra result, which is less than half of the 1080p Ultra score, indicates that the RTX 5070 Ti is finally becoming the primary limiting factor. The GPU's raw compute power, which is in the 87th percentile of all GPUs, is being fully taxed by the combination of 4K resolution and maximum graphical fidelity. The data implies that for this specific game, the CPU holds back performance at 1080p and 1440p, but the GPU takes over as the bottleneck at 4K Ultra.

CPU Role

The Intel Core i5-10400F is a 6-core, 12-thread processor based on the Comet Lake architecture, with a base clock of 2.90 GHz and a boost clock of 4.30 GHz. Its benchmark scores are modest by modern standards, with a Cinebench R23 multi-core score of 10297 and a single-core score of 1453. The CPU’s 12 MB of shared L3 cache and dual-channel DDR4 memory support with 42.7 GB/s bandwidth are typical for its generation, but they are not exceptional.

In Fivem, the role of the CPU is critical. The game's engine is known to be sensitive to single-thread performance and can be heavily impacted by the number of entities and scripts running on a server. The data shows that at 1080p Low, the system reaches 225.8 FPS, which is likely near the ceiling of what this CPU can produce in this scenario. The 3DMark 2-thread score of 1350 and single-thread score of 688 suggest that the CPU's per-core strength is adequate, but not outstanding. The performance difference between 1080p Low (225.8 FPS) and 1440p Low (194.3 FPS) is a 31.5 FPS drop, which is less than the drop from 1440p Low to 4K Low (80.1 FPS). This pattern suggests that as the resolution increases, the CPU has more time to process game logic, allowing the GPU to become more of a factor. The i5-10400F is likely the limiting component in most scenarios, preventing the RTX 5070 Ti from reaching its full potential.

How This Combo Ranks

Within the benchmark database, this specific combination of the Intel Core i5-10400F and NVIDIA GeForce RTX 5070 Ti is ranked 307th out of 1792 tested combos for Fivem. This places it in the top 17% of all tested systems, which is a strong showing given the age of the CPU. The ranking suggests that while the CPU is a limiting factor, the sheer power of the RTX 5070 Ti compensates enough to make this a high-performing combo overall.

The ranking is particularly interesting when considering the CPU's percentile versus all CPUs (73rd) and the GPU's percentile versus all GPUs (87th). The combo's rank is lower than the GPU's percentile would suggest, reinforcing the idea that the CPU is holding back the system. If the GPU were the only factor, one might expect a higher rank. The data indicates that the combo's performance is a blend of the two, with the CPU preventing the system from reaching the upper echelons of the ranking that the GPU alone might achieve. The RTX 5070 Ti's nearest rival, the RTX 4080, has a nearly identical average benchmark score (52085 vs 52086), yet this combo's rank is determined by the real-world game performance, which is CPU-limited.

FAQ

Q: What is the best resolution to play Fivem with this combo for a high refresh rate monitor?

A: For a 1080p or 1440p monitor with a high refresh rate, the data shows that the combo can deliver well over 100 FPS on High settings. At 1080p High, the average is 188.2 FPS, and at 1440p High, it is 133.4 FPS.

Q: Does this CPU bottleneck the GPU in Fivem?

A: Yes, the data strongly suggests a CPU bottleneck at lower resolutions and settings. For example, at 1080p Low, the system only achieves 225.8 FPS, which is likely limited by the i5-10400F's processing power. The GPU's performance is only fully utilized at 4K Ultra, where the frame rate drops to 53.9 FPS.

Q: How significant is the performance drop when going from 1080p to 4K?

A: The drop is substantial. At High settings, the average FPS falls from 188.2 at 1080p to 72.7 at 4K, a reduction of 115.5 FPS. At Ultra settings, the drop is even more severe, from 155.7 FPS to 53.9 FPS.

Q: Is the RTX 5070 Ti a good match for the i5-10400F in this game?

A: The data shows a mismatch. The RTX 5070 Ti is a top-tier GPU, ranking in the 87th percentile, but the i5-10400F, while ranking in the 73rd percentile, is a generation older and limits performance in Fivem. The combo ranks 307th out of 1792, indicating that better pairings exist.

Q: What is the frame rate difference between Low and Ultra settings at 1440p?

A: At 1440p, the difference is significant. The Low preset averages 194.3 FPS, while the Ultra preset averages 101.7 FPS. This is a 92.6 FPS difference, showing that graphical settings have a major impact on performance.

Q: Should I expect playable frame rates at 4K with this setup?

A: Yes, but with caveats. At 4K High, the average is 72.7 FPS, which is playable. However, at 4K Ultra, the average drops to 53.9 FPS. This suggests that for 4K gaming, you may need to adjust settings below Ultra for a smoother experience.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is a powerhouse, built on the Blackwell 2.0 architecture with 8960 shading units and 16 GB of GDDR7 memory on a 256-bit bus, providing a massive 896.0 GB/s of memory bandwidth. Its compute capabilities are immense, with a FP32 performance of 43.94 TFLOPS. The GPU's benchmark scores are equally impressive, with a Passmark G3D score of 32974 and a 3DMark Steel Nomad score of 6604.

However, in Fivem, the GPU's role is secondary to the CPU in most scenarios. The measured FPS data shows that at 1080p, even with Low settings, the system only reaches 225.8 FPS. This is not a limitation of the GPU, which could likely produce much higher frame rates, but rather a reflection of the CPU's inability to feed it data fast enough. The GPU's power only becomes evident at 4K Ultra, where the frame rate drops to 53.9 FPS. This is where the GPU's 16 GB of VRAM and raw processing power are fully engaged, rendering complex scenes at maximum detail. The data indicates that the RTX 5070 Ti is an overkill component for this game when paired with this CPU, as its potential is largely untapped until the resolution and settings are maxed out.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the target resolution and desired frame rate. At 1080p, all settings are playable, but the High preset offers a good balance with an average of 188.2 FPS. The Ultra preset at 1080p still delivers a high 155.7 FPS, so it is a viable option if visual fidelity is the priority. At 1440p, the High preset provides an excellent experience with 133.4 FPS, while Ultra drops to 101.7 FPS, which is still very smooth. For 4K gaming, the High preset is the recommended choice, as it achieves 72.7 FPS, which is above the 60 FPS threshold for most players. The Ultra preset at 4K drops to 53.9 FPS, which may be less desirable for fast-paced gameplay.

For the best overall experience, the High preset at 1440p appears to be the sweet spot, offering high visual quality and a frame rate (133.4 FPS) that can take advantage of high refresh rate monitors. If a player prioritizes maximum frame rates for competitive play, the Low preset at 1080p provides the highest average at 225.8 FPS. The data suggests avoiding the Ultra preset at 4K unless a lower frame rate is acceptable.

Measured FPS Breakdown

The following is a complete breakdown of the measured average FPS for each resolution and settings combination.

1920x1080:

• Low: 225.8 FPS
• Medium: 205.4 FPS
• High: 188.2 FPS
• Ultra: 155.7 FPS

2560x1440:

• Low: 194.3 FPS
• Medium: 166.7 FPS
• High: 133.4 FPS
• Ultra: 101.7 FPS

3840x2160:

• Low: 114.2 FPS
• Medium: 89.5 FPS
• High: 72.7 FPS
• Ultra: 53.9 FPS

These numbers illustrate a clear hierarchy. At each resolution, the Low preset yields the highest frame rate, followed by Medium, then High, with Ultra being the most demanding. The performance penalty for moving from Low to Ultra is substantial at every resolution, but it is most pronounced at 4K, where the frame rate is more than halved from 114.2 FPS to 53.9 FPS. This data confirms that the GPU becomes the limiting factor at 4K Ultra, while the CPU primarily constrains performance at 1080p and 1440p.