Fivem

Fivem, a multiplayer modification framework built atop Grand Theft Auto V, presents a unique performance profile that depends heavily on both the CPU and GPU. This analysis examines the AMD Ryzen 9 9950X3D paired with the NVIDIA GeForce RTX 3080, using measured FPS data across resolutions and settings to understand where the bottlenecks lie and how the combination performs relative to other systems.

Resolution Scaling

The measured FPS data reveals a significant performance drop as resolution increases from 1080p to 4K, but the pattern is not uniform across all settings presets. At Low settings, the transition from 1920x1080 to 2560x1440 results in a drop from 250.6 FPS to 166.9 FPS, a reduction of approximately 33%. Moving from 1440p to 3840x2160 at Low settings further reduces the average to 90.2 FPS, another 46% decline. This steep scaling curve at Low settings suggests that the GPU becomes the primary limiting factor at higher resolutions, as the CPU has ample headroom to feed frames when graphical load is minimal.

At High settings, the scaling is less dramatic but still pronounced. The 1080p result of 155.2 FPS drops to 101.8 FPS at 1440p, then to 57.2 FPS at 4K. The 4K High figure is particularly telling — it sits just above the 60 FPS threshold, indicating that the RTX 3080 is being pushed hard. The Ultra preset shows the most severe scaling, with 123 FPS at 1080p falling to 82 FPS at 1440p and finally 42.8 FPS at 4K. This 65% reduction from 1080p to 4K at Ultra settings demonstrates that the GPU's memory bandwidth and compute resources are saturated at higher resolutions.

The data implies that at 1080p and 1440p, the Ryzen 9 9950X3D's high single-thread and multi-thread performance keeps the system from being CPU-bound in most scenarios. However, at 4K, the RTX 3080's 10 GB of GDDR6X memory and 760.3 GB/s bandwidth become critical, and the scaling pattern suggests the GPU is the limiting component. The difference between Low and Ultra at 4K — 90.2 FPS versus 42.8 FPS — highlights how much headroom the CPU has, as even the lowest setting cannot achieve high frame rates due to GPU constraints.

Settings Recommendations

Based on the measured rows, the optimal balance between visual fidelity and performance appears to be the Medium preset at 1440p. This configuration delivers 132 FPS, which is well above the 60 FPS threshold for smooth gameplay and only 21% lower than the Low preset's 166.9 FPS at the same resolution. The Medium setting at 1440p offers a substantial improvement over High (101.8 FPS) and Ultra (82 FPS) while maintaining a frame rate that exceeds most display refresh rates.

For 1080p users, the Medium preset at 196.1 FPS is the recommended choice. It provides a significant boost over High (155.2 FPS) and Ultra (123 FPS) while remaining close to the Low preset's 250.6 FPS. The gap between Medium and Low at 1080p is only 22%, but the visual quality difference is likely substantial. At 4K, the data shows that only the Low preset (90.2 FPS) achieves a playable frame rate above 60 FPS. The Medium preset at 68.4 FPS is technically playable but close to the edge, while High (57.2 FPS) and Ultra (42.8 FPS) fall below the threshold.

The measured results indicate that the RTX 3080 cannot comfortably handle Ultra settings at any resolution above 1080p without dropping below 100 FPS. The Ultra preset at 1440p yields 82 FPS, which may be acceptable for some users but represents a 38% reduction from Medium. The data suggests that Medium is the "sweet spot" for this combination, offering the best balance of frame rate and visual quality across all resolutions.

FAQ

Q: What is the best resolution for this CPU-GPU combination in Fivem?

A: Based on the measured data, 2560x1440 at Medium settings provides the best experience with 132 FPS. At 1080p, the Medium preset achieves 196.1 FPS, while 4K only reaches 90.2 FPS at Low settings.

Q: Can this system run Fivem at 4K with high frame rates?

A: No. At 3840x2160, the highest measured average FPS is 90.2 at Low settings. The High preset produces 57.2 FPS, and Ultra drops to 42.8 FPS, both below the 60 FPS threshold for smooth gameplay.

Q: How does the Ultra preset compare to Low at 1440p?

A: The Ultra preset at 2560x1440 delivers 82 FPS, which is 84.9 FPS lower than the Low preset's 166.9 FPS. This represents a 51% reduction in frame rate, indicating that Ultra settings heavily tax the GPU.

Q: Is the CPU or GPU the bottleneck at 1080p?

A: The data suggests the GPU is the primary limiter even at 1080p. The Low preset reaches 250.6 FPS, but the CPU's performance is not fully utilized since the RTX 3080 cannot push beyond this level. The Ryzen 9 9950X3D has a high average benchmark score of 71660, indicating it has significant headroom.

Q: What is the frame rate difference between High and Ultra at 4K?

A: At 3840x2160, the High preset achieves 57.2 FPS while Ultra drops to 42.8 FPS. This 14.4 FPS difference (25%) shows that Ultra settings impose a substantial additional load on the GPU.

Q: Does the RTX 3080's VRAM capacity affect 4K performance?

A: The 10 GB of GDDR6X memory with 760.3 GB/s bandwidth appears insufficient for Ultra settings at 4K, as the measured 42.8 FPS indicates the GPU is heavily stressed. The memory bus width of 320 bit and the 68 RT cores contribute to the performance characteristics seen in the data.

Measured FPS Breakdown

At 1920x1080, the measured averages are 250.6 FPS for Low, 196.1 FPS for Medium, 155.2 FPS for High, and 123 FPS for Ultra. The scaling from Low to Ultra shows a 51% reduction in frame rate, with the largest single drop occurring between Medium and High (40.9 FPS) and between High and Ultra (32.2 FPS). These figures indicate that each settings tier imposes a meaningful cost on the GPU.

At 2560x1440, the averages are 166.9 FPS for Low, 132 FPS for Medium, 101.8 FPS for High, and 82 FPS for Ultra. The reduction from Low to Ultra is 84.9 FPS (51%), mirroring the percentage drop seen at 1080p. However, the absolute frame rates are lower, confirming that resolution scaling affects all presets equally.

At 3840x2160, the averages are 90.2 FPS for Low, 68.4 FPS for Medium, 57.2 FPS for High, and 42.8 FPS for Ultra. The Low to Ultra reduction is 47.4 FPS (53%), consistent with the other resolutions. The 4K results show that even the Low preset cannot reach 100 FPS, and the gap between Medium and High at 4K (11.2 FPS) is smaller than at lower resolutions, suggesting diminishing returns as the GPU approaches its limits.

GPU Role

The NVIDIA GeForce RTX 3080, built on the Ampere architecture with a GA102 chip, provides the graphical horsepower for this combination. Its 10 GB of GDDR6X memory operates at 19 Gbps effective, delivering 760.3 GB/s of bandwidth across a 320-bit bus. The GPU's boost clock of 1710 MHz and base clock of 1440 MHz, combined with 8704 shading units and 272 texture mapping units, define its raw compute capability of 29.77 TFLOPS FP32.

The measured FPS data shows that the RTX 3080 is the limiting factor at 4K, particularly at higher settings. The Ultra preset at 3840x2160 yields only 42.8 FPS, which is below the 60 FPS threshold. The GPU's 96 ROPs and 68 RT cores contribute to its performance, but the 10 GB VRAM capacity appears to constrain high-resolution, high-detail workloads. The percentile rank of 80 among all GPUs, with an average benchmark score of 35787, places it as a capable but not top-tier card. Its nearest rivals include the AMD Radeon Pro Duo (deltaPct -0.2), AMD Radeon 880M (deltaPct 0.4), and AMD Radeon RX 7900 GRE (deltaPct -0.9), showing that the RTX 3080 is competitive within its segment.

The GPU's 320 W TDP and suggested 700 W PSU indicate that power delivery is sufficient for sustained loads. The measured data shows that at 1080p Low, the GPU can output 250.6 FPS, but this drops to 90.2 FPS at 4K Low, a 64% reduction that highlights the memory bandwidth and compute scaling limits.

CPU Role

The AMD Ryzen 9 9950X3D is a 16-core, 32-thread processor based on the Zen 5 architecture (Granite Ridge), manufactured on a 4 nm process by TSMC. It has a base clock of 4.30 GHz and a boost clock of 5.70 GHz, with a 170 W TDP. The CPU's cache hierarchy includes 80 KB L1 per core, 1 MB L2 per core, and 128 MB shared L3 cache, which is substantial for gaming workloads.

In Fivem, the CPU's role is evident in the high frame rates achieved at 1080p Low (250.6 FPS). The processor's single-thread score of 1292 in 3dMark and 8430 in Cinebench R23 single-core indicate strong per-core performance, which is critical for the game's simulation and multiplayer logic. The multi-thread performance is equally impressive, with a Cinebench R23 multi-core score of 59712 and Geekbench multi-core of 22515. This suggests that the CPU can handle the overhead of Fivem's custom server-side scripts and player interactions.

The Ryzen 9 9950X3D's percentile rank of 96 among all CPUs, with an average benchmark score of 71660, places it near the top of the performance hierarchy. Its nearest rivals include the Intel Xeon Platinum 8270 (deltaPct 0.9), AMD Ryzen 9 9950X (deltaPct 1.8), and Intel Core i7-14700KF (deltaPct 2.2). The data shows that the CPU is not the bottleneck in this combination, as the frame rates scale primarily with resolution and settings, indicating that the GPU is the limiting factor.

The 128 MB L3 cache is particularly beneficial for Fivem, as it can store frequently accessed game assets and reduce memory latency. The DDR5 memory support with dual-channel configuration and 89.6 GB/s bandwidth provides adequate data throughput for the CPU's 16 cores. The measured FPS data confirms that the CPU maintains high frame rates at lower resolutions, but at 4K, the GPU's performance ceiling dominates.

How This Combo Ranks

This combination of the AMD Ryzen 9 9950X3D and NVIDIA GeForce RTX 3080 ranks 551 out of 1792 tested combos in Fivem, placing it in the 69th percentile. This ranking reflects the balanced but not top-tier performance of the RTX 3080, which holds back the otherwise exceptional CPU. The CPU's 96th percentile rank and the GPU's 80th percentile rank suggest a slight imbalance, where the processor has more headroom than the graphics card can utilize.

In practical terms, this ranking means that many other combinations achieve higher FPS in Fivem, likely those with newer or more powerful GPUs. The RTX 3080's nearest rivals — the AMD Radeon Pro Duo, AMD Radeon 880M, and AMD Radeon RX 7900 GRE — have similar average benchmark scores, but the actual in-game performance may vary. The 4K Ultra result of 42.8 FPS is below what many users would consider acceptable, and even 1440p Ultra at 82 FPS is not ideal for high-refresh-rate monitors.

The combo's rank of 551 out of 1792 suggests that while this system is capable of smooth gameplay at 1080p and 1440p with appropriate settings, it is not optimized for maximum visual fidelity at 4K. The data indicates that users seeking higher 4K performance would need a GPU with more VRAM and higher bandwidth, as the RTX 3080's 10 GB configuration is a limiting factor. The CPU's high performance ensures that this system will not be CPU-bound in most scenarios, making it a solid foundation for future GPU upgrades.