Fivem

# Fivem Performance Analysis: AMD Ryzen 9 9950X3D + AMD Radeon RX 9070

This combination of AMD's flagship 16-core Ryzen 9 9950X3D and the RDNA 4-based Radeon RX 9070 delivers a compelling Fivem experience, but the data reveals a system that behaves differently depending on resolution and settings. The measured frame rates range from a highly playable 154.4 FPS at 1080p High to a demanding 46.2 FPS at 4K Ultra, suggesting a balance that shifts between CPU and GPU limitations. The combo ranks 584th out of 1792 tested configurations, placing it in the upper third of all systems evaluated for this multiplayer title.

Resolution Scaling

The FPS drop from 1080p to 4K is dramatic and reveals where the bottleneck lies. At High settings, the system delivers 154.4 FPS at 1080p, 102.5 FPS at 1440p, and 55.5 FPS at 4K. This represents a 33.6% performance reduction when moving from 1080p to 1440p, and a further 45.9% drop when stepping up to 4K. The scaling pattern indicates that the GPU becomes increasingly dominant as the resolution climbs, with the RX 9070's 16 GB of GDDR6 memory and 644.6 GB/s bandwidth being pushed harder at higher pixel counts.

At Low settings, the resolution scaling is even more pronounced: 248.8 FPS at 1080p drops to 163 FPS at 1440p (a 34.5% reduction) and then to 86.7 FPS at 4K (a 46.8% further drop). This steep decline at lower settings suggests that even with reduced graphical load, the GPU's rendering pipeline — specifically its 3584 shading units and 128 ROPs — becomes the limiting factor as pixel count increases. The fact that Fivem at 4K Low (86.7 FPS) still beats 4K High (55.5 FPS) by 56.2% indicates that the game's visual effects, not just resolution, heavily influence GPU workload.

The Ultra preset tells a similar story but with lower absolute numbers: 118.8 FPS at 1080p, 78 FPS at 1440p, and 46.2 FPS at 4K. The 1080p to 4K drop of 61.1% at Ultra is the largest of any settings tier, suggesting that the combination of maximum visual fidelity and high resolution creates the most demanding scenario for the RX 9070. Notably, the gap between High and Ultra at 4K is only 9.3 FPS, while at 1080p it's 35.6 FPS — implying that at 4K, the GPU is so saturated that additional settings increases have diminishing impact on frame rate.

GPU Role

The Radeon RX 9070 is built on the RDNA 4.0 architecture using TSMC's 4 nm process, featuring 53,900 million transistors on a 357 mm² die. Its boost clock of 2520 MHz and game clock of 2070 MHz provide the computational muscle, while the 16 GB of GDDR6 memory on a 256-bit bus delivers 644.6 GB/s of bandwidth. In Fivem, this memory capacity proves sufficient even at 4K Ultra, where the 46.2 FPS average indicates the GPU is working near its limits.

The GPU's benchmark scores contextualize its gaming performance. A Passmark G3D score of 25381 and a 3DMark Steel Nomad DX12 score of 6290 show solid DirectX 12 capability, which aligns with Fivem's modern rendering requirements. The GPU's 79th percentile ranking versus all GPUs places it above average, though its nearest rivals — the NVIDIA A2 (deltaPct -0.2%), NVIDIA Quadro GV100 (deltaPct 0.3%), and AMD Radeon HD 7970 (deltaPct 0.7%) — are not gaming-focused cards, suggesting the RX 9070's raw compute is strong but its gaming optimization is what matters here.

The FP32 throughput of 36.13 TFLOPS and texture rate of 564.5 GTexel/s explain why the card handles 1080p High so effortlessly at 154.4 FPS. However, the pixel rate of 322.6 GPixel/s becomes a constraint at 4K, where the 8.3 million pixels per frame require substantial fill rate. The 128 ROPs are adequate but not excessive for 4K gaming, which is why the 4K Ultra frame rate drops below 50 FPS — a clear signal that this GPU, while capable, is not a 4K Ultra powerhouse in Fivem.

CPU Role

The AMD Ryzen 9 9950X3D is a 16-core, 32-thread processor based on Zen 5 architecture with Granite Ridge codename, manufactured on TSMC's 4 nm process. Its 128 MB of shared L3 cache is a defining feature, providing substantial memory for game data. The base clock of 4.30 GHz and boost clock of 5.70 GHz ensure high single-thread performance, which is critical for Fivem's multiplayer logic and physics simulation.

The CPU's benchmark results demonstrate its capability. A Cinebench R23 multicore score of 59712 and single-core score of 8430 place it firmly in high-performance territory. The 3DMark 16-thread score of 16374 and max-thread score of 17184 show strong scaling across cores, while the 2-thread score of 2549 indicates excellent per-thread performance. The CPU's 96th percentile ranking versus all CPUs confirms its elite status, with nearest rivals including the Intel Xeon Platinum 8270 (deltaPct 0.9%), AMD Ryzen 9 9950X (deltaPct 1.8%), and Intel Core i7-14700KF (deltaPct 2.2%).

In Fivem, the CPU's role is most evident at 1080p, where the 248.8 FPS Low result suggests the processor can feed frames faster than the GPU can render at higher settings. The fact that 1080p Low achieves 248.8 FPS while 1080p Ultra drops to 118.8 FPS indicates the GPU, not CPU, is the primary limiter even at this resolution. However, the CPU's 128 MB L3 cache likely helps maintain consistent frame pacing in multiplayer scenarios with many entities, a factor not directly captured in average FPS numbers.

The 4.30 GHz base clock and 5.70 GHz boost clock provide the responsiveness needed for Fivem's often CPU-intensive server-side calculations and player interactions. The 32 threads ensure that even with background tasks, the game receives adequate processing resources. The 89.6 GB/s memory bandwidth and dual-channel DDR5 support complement the CPU's architecture, though Fivem's engine may not fully utilize all 16 cores — the strong single-thread scores (Cinebench R23 single-core 8430, Geekbench single-core 3401) are likely more relevant for this game's frame generation.

Measured FPS Breakdown

At 1920x1080, the system produces its highest frame rates. Low settings yield 248.8 FPS, Medium drops to 193.1 FPS (a 22.4% reduction), High sits at 154.4 FPS (a 20% further drop), and Ultra reaches 118.8 FPS (a 23.1% additional reduction). This linear scaling from Low to Ultra indicates consistent GPU workload increases across settings tiers.

At 2560x1440, the pattern continues but with lower absolute values. Low delivers 163 FPS, Medium achieves 126.9 FPS (22.1% lower), High reaches 102.5 FPS (19.2% lower), and Ultra bottoms out at 78 FPS (23.9% lower). The 1440p results show the system remains highly playable even at Ultra, with 78 FPS comfortably above typical 60 FPS targets.

At 3840x2160, performance becomes more constrained. Low yields 86.7 FPS, Medium drops to 69.4 FPS (19.9% reduction), High falls to 55.5 FPS (20% reduction), and Ultra reaches 46.2 FPS (16.8% reduction). The diminishing percentage drops at 4K suggest the GPU is becoming saturated, with each settings tier adding less relative overhead as the pixel count dominates the workload.

The largest single-step FPS delta in the entire dataset is the 1080p Low to 4K Low drop of 162.1 FPS, while the smallest is the 4K High to 4K Ultra drop of 9.3 FPS. This asymmetry highlights how resolution scaling and settings scaling interact non-linearly — at 4K, the GPU's fill rate and memory bandwidth are the primary constraints, while at 1080p, the processor can push much higher frame rates that the GPU then limits.

FAQ

Q: Does this combo achieve 60 FPS at 4K in Fivem?

A: At 4K Medium, the system averages 69.4 FPS, exceeding the 60 FPS threshold. However, at 4K High it falls to 55.5 FPS, and at 4K Ultra it drops to 46.2 FPS, so 60 FPS at 4K is only achievable with Medium settings or lower.

Q: What is the best resolution for high refresh rate gaming?

A: At 1080p High, the system delivers 154.4 FPS, which supports 144 Hz monitors. At 1440p High, 102.5 FPS is achieved, suitable for 100 Hz displays. For 240 Hz gaming, 1080p Low at 248.8 FPS is the only settings/resolution combo that exceeds 240 FPS.

Q: How does the CPU's multi-threaded performance compare to its nearest rivals?

A: The Ryzen 9 9950X3D has an average benchmark score of 71660, which is 0.9% higher than the Intel Xeon Platinum 8270 (71056), 1.8% higher than the AMD Ryzen 9 9950X (70420), and 2.2% higher than the Intel Core i7-14700KF (70104). It trails the Intel Xeon 6517P (73050) by 1.9%.

Q: Is the GPU's 16 GB memory sufficient for 4K gaming in Fivem?

A: The 16 GB GDDR6 memory with 644.6 GB/s bandwidth supports 4K rendering, as evidenced by the measurable frame rates at 4K Ultra (46.2 FPS). The memory capacity does not appear to be a limiting factor based on the data, though the GPU's overall throughput constraints become evident at this resolution.

Q: What settings preset provides the most balanced experience at 1440p?

A: At 1440p High, the system achieves 102.5 FPS, which offers a strong balance between visual fidelity and performance. The 1440p Medium preset at 126.9 FPS provides a higher frame rate with modest visual trade-offs, while 1440p Ultra at 78 FPS remains playable but with reduced headroom.

Q: How does this combo rank among all tested systems for Fivem?

A: The combination ranks 584th out of 1792 tested combos, placing it in the 67th percentile of all configurations. This indicates above-average performance, though many higher-ranked systems likely feature more powerful GPUs for 4K Ultra scenarios.

Settings Recommendations

For the best experience across different display configurations, the data supports specific settings choices. At 1080p, the High preset at 154.4 FPS is the sweet spot — it provides excellent frame rates while maintaining visual quality, and the 248.8 FPS Low preset is only beneficial for competitive play on 240 Hz monitors. The 1080p Ultra preset at 118.8 FPS is reasonable but offers diminishing returns over High.

At 1440p, the Medium preset at 126.9 FPS is recommended for high refresh rate displays, as it maintains fluid motion while reducing GPU strain. The High preset at 102.5 FPS is a strong alternative for users prioritizing visual fidelity over raw frame rate, and it remains well above 60 FPS. The 1440p Ultra preset at 78 FPS is playable but requires a 75 Hz or lower refresh rate display to avoid tearing without V-Sync.

At 4K, the Medium preset at 69.4 FPS is the only settings tier that reliably exceeds 60 FPS. The High preset at 55.5 FPS is acceptable for slower-paced gameplay, while Ultra at 46.2 FPS should be reserved for users who prioritize maximum visual quality over smoothness. The Low preset at 86.7 FPS is the best choice for 4K gaming on 60 Hz displays with headroom, but the visual compromise may not be worth it given Medium's closer proximity to 60 FPS.

For users with variable refresh rate monitors, the 1440p High preset at 102.5 FPS offers the most flexible experience, allowing frame rates to fluctuate between 78 FPS (Ultra) and 126.9 FPS (Medium) without severe stuttering. The 1080p Medium preset at 193.1 FPS similarly provides a wide performance envelope.

How This Combo Ranks

The comboRankInGame of 584 out of 1792 places this system in the upper third of all tested configurations for Fivem. This ranking reflects the balance between the Ryzen 9 9950X3D's exceptional CPU performance and the RX 9070's solid but not top-tier GPU capabilities. The 96th percentile CPU ranking versus 79th percentile GPU ranking suggests the processor is the stronger component in this pairing, which is beneficial for Fivem's multiplayer-oriented workloads.

The CPU's average benchmark score of 71660 positions it favorably against its nearest rivals, with a 2.2% advantage over the Intel Core i7-14700KF and a 1.8% edge over the AMD Ryzen 9 9950X. However, the GPU's average benchmark score of 34780 places it near the NVIDIA A2 (deltaPct -0.2%) and Quadro GV100 (deltaPct 0.3%), which are not gaming-focused cards — this suggests the RX 9070's gaming performance is defined more by its architecture than raw compute scores.

In the context of Fivem specifically, the 584th rank out of 1792 combos means there are 1208 configurations that perform worse and 583 that perform better. Given that Fivem is a multiplayer mod for Grand Theft Auto V, the game's engine tends to favor high single-thread CPU performance, which this system delivers in abundance. The 128 MB L3 cache likely provides a unique advantage in scenarios with many player-created assets and mods, though this is not directly quantifiable from the average FPS data.

The 4K Ultra result of 46.2 FPS is the weak point of this configuration, as systems ranked higher likely achieve smoother 4K performance with more powerful GPUs. Conversely, the 1080p Low result of 248.8 FPS demonstrates that this combo can excel in competitive or high-refresh-rate scenarios where CPU performance is paramount. The overall rank of 584th reflects this duality — a system that is excellent for 1080p-1440p gaming but merely adequate for 4K Ultra, positioning it as a versatile choice for most Fivem players who prioritize frame rates over maximum resolution.