Fivem

The Intel Core i7-14700KF and NVIDIA GeForce RTX 3060 Ti combination delivers a strong 1080p experience in Fivem, but the data reveals a clear shift in bottleneck behavior as resolution climbs. At 1080p, the setup is heavily CPU-bound, with frame rates ranging from 98.2 FPS at Ultra settings to a commanding 199.1 FPS at Low. This massive spread—over 100 FPS between presets—shows that the graphics card is not the limiting factor at this resolution; the CPU's performance headroom is what allows such high frame rates. Moving to 1440p, the gap narrows significantly, with Ultra dropping to 64.8 FPS and Low still hitting 126.5 FPS, indicating the GPU begins to assert its influence. At 4K, the RTX 3060 Ti becomes the primary constraint, as Ultra falls to 36.6 FPS and even Low settings only reach 69.5 FPS. The scaling pattern from 1080p to 4K is steepest on the Low preset, which loses 129.6 FPS (65%), while the Ultra preset loses 61.6 FPS (63%), confirming that the GPU's workload reduction at lower settings cannot compensate for the sheer pixel count at 4K.

How This Combo Ranks

This pairing sits at rank 920 out of 1792 tested combinations in Fivem, placing it in the 51st percentile of all CPU-GPU pairings for this title. While that rank might seem mid-pack, it is crucial to contextualize it against the hardware's individual strengths. The RTX 3060 Ti has a percentile rank of 69 against all GPUs, while the i7-14700KF ranks in the 96th percentile against all CPUs. The combo's middling position in-game suggests that Fivem's performance is not purely a function of raw hardware capability; the game’s multiplayer nature and server-side dependencies likely mute the impact of high-end components. Benchmark results show the GPU outperforming its nearest rivals—the AMD Radeon RX 6700M, RX 6600, and Radeon 890M—with a deltaPct of -0.2, -0.5, and -0.5 respectively, meaning the RTX 3060 Ti scores slightly higher than all three. The CPU, meanwhile, is virtually tied with the Intel Core i7-14700K (0% delta), sits 0.3% ahead of the AMD EPYC 9115, and trails the AMD Ryzen 9 9950X by 0.4%. This parity at the component level, combined with a mid-tier game rank, indicates that Fivem's engine does not scale linearly with component strength, leaving the combo's 920th rank as a reflection of game-specific optimization rather than hardware deficiency.

CPU Role

The Intel Core i7-14700KF is a 20-core, 28-thread processor from the Raptor Lake architecture, with a base clock of 3.40 GHz and a boost clock of 5.60 GHz. Its 33 MB of shared L3 cache and 2 MB per-core L2 cache provide substantial on-die resources for game logic and physics. In Fivem, the CPU's role is most evident at 1080p, where the data shows a 100+ FPS swing between Low and Ultra settings. At 1080p Low, the system achieves 199.1 FPS, which is not a GPU-limited scenario—the RTX 3060 Ti could easily render more frames if the CPU could feed it. The i7-14700KF's single-thread performance is strong, as evidenced by its Geekbench single-core score of 2972 and Cinebench R23 single-core score of 6290, which are critical for Fivem's often single-threaded server-side calculations. However, the CPU's 20 cores and 28 threads also help with background tasks and multiple client-side processes common in multiplayer modding. The benchmark data shows the CPU's multithreaded might—Cinebench R23 multicore score of 44557 and Passmark multithread score of 52425—but Fivem's scaling does not fully exploit this, as evidenced by the combo's rank. The CPU's 96th percentile ranking against all CPUs indicates it is not the bottleneck in most scenarios; rather, the GPU becomes the limiting factor as resolution increases, particularly at 4K where the CPU's high clock speeds cannot overcome the render load.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of this combo's capabilities across resolutions and settings. At 1920x1080, the average frame rates are 98.2 FPS (Ultra), 121.6 FPS (High), 155 FPS (Medium), and 199.1 FPS (Low). These numbers suggest that at 1080p, the RTX 3060 Ti has ample headroom, and the CPU is doing the heavy lifting. The 1440p results show a noticeable drop but remain playable: 64.8 FPS (Ultra), 81.5 FPS (High), 102.1 FPS (Medium), and 126.5 FPS (Low). At 4K, the GPU is clearly overtaxed, with 36.6 FPS (Ultra), 43.9 FPS (High), 58.2 FPS (Medium), and 69.5 FPS (Low). The delta between settings is telling: at 1080p, the difference between Low and Ultra is 100.9 FPS (51%), while at 4K, the same comparison yields a 32.9 FPS difference (47%). This indicates that the GPU's performance ceiling is being approached at 4K, and lowering settings provides diminishing returns. The data shows a consistent pattern: each resolution step down (from 4K to 1440p to 1080p) yields roughly a 1.8x to 2x improvement in frame rates across all settings, underscoring the GPU's memory bandwidth and pixel throughput limitations. The RTX 3060 Ti's 8 GB of GDDR6 memory on a 256-bit bus with 448.0 GB/s bandwidth is sufficient for 1080p and 1440p, but at 4K, the memory capacity and bandwidth become constraining factors, as evidenced by the sub-60 FPS results at High and Ultra settings.

GPU Role

The NVIDIA GeForce RTX 3060 Ti, built on the Ampere architecture with a GA104 chip, features 4864 shading units, 152 texture mapping units, and 80 raster output pipelines. Its base clock is 1410 MHz, boosting to 1665 MHz, and it operates at 16.20 TFLOPS FP32 performance. The 8 GB of GDDR6 memory with a 256-bit bus provides 448.0 GB/s of bandwidth, which is a critical spec for Fivem's open-world rendering. The GPU's role in this combo is most pronounced at 4K, where the data shows a hard performance ceiling. At 4K Ultra, the 36.6 FPS average is below the 60 FPS threshold, and even 4K Low at 69.5 FPS struggles to maintain fluidity. The GPU's 69th percentile ranking against all GPUs places it in the mid-range tier, and benchmark results show it edging out rivals like the AMD Radeon RX 6700M (25180 vs 25120 average score) and RX 6600 (25235 vs 25120). However, Fivem's engine appears to favor higher clock speeds over raw compute, as the RTX 3060 Ti's boost clock of 1665 MHz is modest compared to its core count. The Passmark G3D score of 20349 and 3DMark Steel Nomad DX12 score of 2626 indicate the GPU can handle modern workloads, but the 4K data suggests that the 8 GB VRAM is a limiting factor, as texture-heavy scenes at Ultra settings likely exceed the memory footprint. The GPU's 200 W TDP and PCIe 4.0 x16 interface are adequate, but the 4K results show that this card is best paired with 1080p or 1440p displays for Fivem.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the target resolution. For 1080p, the High preset at 121.6 FPS offers the best balance of visual fidelity and performance, as it clears the 120 FPS mark while maintaining detail. The Ultra preset at 98.2 FPS is also playable, but the 23 FPS drop from High to Ultra is significant for marginal visual gains. For 1440p, the Medium preset at 102.1 FPS is the recommended choice, as it stays above 100 FPS and provides a smooth experience. High at 81.5 FPS is also viable for those prioritizing visuals, but Medium offers a more consistent frame rate. At 4K, the data is less favorable: Medium at 58.2 FPS is the only preset that approaches playability, but it still falls short of 60 FPS. Low at 69.5 FPS is the only 4K option that exceeds 60 FPS, but the visual compromise is substantial. The benchmark results indicate that the RTX 3060 Ti's sweet spot is 1440p Medium or 1080p High, where the GPU's bandwidth and compute resources are fully utilized without overloading the memory subsystem. For users with a 4K display, the data suggests that this combo is not suited for high-fidelity gaming, and dropping to 1440p or lowering settings to Low is necessary to maintain playability. The 8 GB VRAM is a clear constraint at 4K Ultra, as the 36.6 FPS result indicates memory pressure is causing performance degradation beyond just pixel fill rate.

FAQ

Q: What is the highest average FPS this combo achieves in Fivem?

A: The highest average FPS is 199.1, achieved at 1920x1080 resolution with Low settings.

Q: Can this combo run Fivem at 4K with playable frame rates?

A: At 4K, only the Low preset (69.5 FPS) exceeds 60 FPS. Medium (58.2 FPS), High (43.9 FPS), and Ultra (36.6 FPS) all fall below the 60 FPS threshold.

Q: How does the RTX 3060 Ti compare to its nearest rival in benchmark scores?

A: The RTX 3060 Ti has an average benchmark score of 25120, which is 0.2% higher than the AMD Radeon RX 6700M (25180), 0.5% higher than the AMD Radeon RX 6600 (25235), and 0.5% higher than the AMD Radeon 890M (25246).

Q: What is the CPU's percentile ranking against all CPUs?

A: The Intel Core i7-14700KF ranks in the 96th percentile against all CPUs, indicating it is a top-tier processor for overall performance.

Q: What is the FPS difference between 1080p Low and 1080p Ultra?

A: The difference is 100.9 FPS, with Low at 199.1 FPS and Ultra at 98.2 FPS, showing a significant performance gap between the lowest and highest settings.

Q: Does the combo rank higher than half of all tested combinations in Fivem?

A: Yes, it ranks 920 out of 1792 combinations, placing it just above the median (51st percentile) of all tested CPU-GPU pairings for this game.