Fivem

The AMD Ryzen 9 9900X paired with the NVIDIA GeForce RTX 4070 Ti delivers a performance profile in Fivem that is heavily dictated by resolution and graphics preset. The measured data reveals a system capable of high refresh rates at 1440p, but one where the GPU becomes the primary constraint as resolution climbs to 4K. This analysis breaks down the measured FPS across all settings and resolutions, contextualizes the combo’s standing among tested hardware, and interprets the roles of the CPU and GPU in this specific multiplayer title.

Resolution Scaling

The progression from 1080p to 4K shows a dramatic shift in frame rates, indicating a clear transition from a CPU-bound scenario to a GPU-bound one. At 1080p with Low settings, the combo achieves an average of 304.2 FPS. Moving to 1440p Low drops this to 203.4 FPS, a reduction of approximately 33%. The step to 4K Low further reduces performance to 112.5 FPS, which is a 45% drop from the 1440p figure. This steep decline with increasing pixel count suggests that while the CPU has ample headroom at lower resolutions, the GPU’s rendering workload scales significantly with resolution.

The pattern persists across all settings. With High settings, the average FPS falls from 194.8 at 1080p to 124 at 1440p (a 36% decrease), and then to 72.7 at 4K (a 41% decrease from 1440p). The Ultra preset shows the most dramatic scaling, with 151.6 FPS at 1080p, dropping to 96.6 FPS at 1440p, and finally to 55.5 FPS at 4K. The consistent ~40% reduction between each resolution step for all presets highlights that the RTX 4070 Ti’s fillrate and memory bandwidth are the limiting factors. The data implies that at 1080p, the system is likely not fully utilizing the GPU, as the CPU can feed frames quickly enough to exceed 300 FPS on Low settings. However, at 4K, the GPU’s workload becomes so heavy that even the strongest CPU cannot compensate, making the 4K experience significantly less fluid.

How This Combo Ranks

In the broader database of tested combinations, this specific pairing of the Ryzen 9 9900X and RTX 4070 Ti ranks at position 203 out of 1792 combos for Fivem. This places the setup in the top 11.3% of all tested configurations, which is a strong showing for a high-end desktop pairing. The rank reflects that while this is not the absolute top-tier configuration, it outperforms the vast majority of systems in this game. The combination’s percentile position suggests it is well-matched for high-refresh-rate gaming at 1440p, but the ranking also implies that there are a significant number of combos that achieve higher average FPS, likely those with more powerful GPUs.

When considering the CPU’s standalone performance, the Ryzen 9 9900X sits in the 94th percentile against all CPUs. Its nearest rivals in synthetic benchmarks are the AMD Ryzen 9 9900X3D, which scores 0.4% higher, and the Intel Core i7-14700F, which scores 0.7% lower. This indicates that the 9900X is a top-tier processor with performance nearly identical to its closest competitors, but the data shows it is not the absolute fastest CPU available. For the GPU, the RTX 4070 Ti is in the 85th percentile against all GPUs. Its closest rival, the NVIDIA GeForce RTX 5090 Mobile, scores 0.6% higher, while the Intel Arc A730M scores 1.5% lower. This positions the 4070 Ti as a robust but not flagship GPU. The combo’s rank of 203 suggests that the pairing of these two high-percentile parts yields a result that is better than either component’s percentile alone, indicating a synergistic balance that works well for Fivem’s engine.

GPU Role

The NVIDIA GeForce RTX 4070 Ti, built on the Ada Lovelace architecture, is the primary driver behind the frame rate differences across resolutions. Its memory configuration includes 12 GB of GDDR6X on a 192-bit bus, providing a bandwidth of 504.2 GB/s. This bandwidth is crucial for handling the texture-heavy environments of Fivem, particularly at higher resolutions where the data throughput demand increases. The GPU’s base clock is 2310 MHz, with a boost clock of 2610 MHz, and it features 7680 shading units. These specifications translate to a pixel rate of 208.8 GPixel/s and a texture rate of 626.4 GTexel/s, which directly influence how many pixels and textures can be processed per second.

The benchmark results show a clear correlation between the GPU’s workload and the final FPS. At 1080p Low, the system hits 304.2 FPS, but this is likely a scenario where the CPU is the bottleneck, as the GPU can render frames faster than the CPU can issue draw calls. However, as the resolution increases to 4K, the pixel fillrate requirement quadruples, and the GPU becomes the limiting factor. The 4K Ultra result of 55.5 FPS demonstrates that the RTX 4070 Ti is stretched to its limits under maximum load. The data suggests that the GPU’s 12 GB of VRAM is sufficient for this game, as no out-of-memory issues are indicated by the frame rates, but the raw compute power is what holds back 4K performance. The RTX 4070 Ti is capable of high refresh rates at 1440p, but for 4K gaming, the user must compromise on settings to maintain playable frame rates.

Settings Recommendations

The measured FPS data provides clear guidance on which settings preset offers the best balance of visual fidelity and performance for this combo. At 1080p, the Ultra preset delivers an average of 151.6 FPS, which is above the threshold for high-refresh-rate monitors. This makes Ultra the recommended choice for 1080p users, as it provides the best visual quality without sacrificing smoothness. The Medium preset at 238.9 FPS and High at 194.8 FPS are also viable but offer diminishing returns in visual quality compared to the frame rate headroom they provide.

For 1440p, the High preset is the sweet spot, achieving 124 FPS. This is comfortably above 60 FPS and close to 120 FPS, providing a smooth experience for most gamers. The Ultra preset drops to 96.6 FPS, which is still playable but may be less desirable for competitive play. The Medium preset at 157 FPS offers a higher frame rate but with reduced visual settings, making High the recommended choice for most users. At 4K, the situation changes dramatically. The High preset yields 72.7 FPS, which is playable, but the Ultra preset falls to 55.5 FPS, which is below the 60 FPS threshold. For 4K, the Low preset at 112.5 FPS is the only option that provides a high refresh rate experience, but it sacrifices significant visual quality. Therefore, the recommendation is to use High settings at 4K for a balanced experience, or Medium at 86.6 FPS if a higher frame rate is preferred over minor visual improvements.

FAQ

Q: What is the highest average FPS this combo can achieve in Fivem?

A: The highest average FPS measured is 304.2 FPS, achieved at 1920x1080 resolution with Low settings.

Q: How does the combo perform at 4K Ultra settings?

A: At 4K Ultra settings, the combo achieves an average of 55.5 FPS, which is below the standard 60 FPS target for smooth gameplay.

Q: Is the CPU or GPU the bottleneck at 1080p Low settings?

A: The data indicates a CPU bottleneck, as the system achieves 304.2 FPS, a figure that suggests the GPU has headroom and is waiting for the CPU to provide more frames.

Q: What is the combo’s rank among all tested configurations?

A: The combo ranks 203rd out of 1792 tested combinations in Fivem, placing it in the top 11.3% of all systems.

Q: How much faster is the 1440p High preset compared to 4K High?

A: The 1440p High preset achieves 124 FPS, which is approximately 70% higher than the 4K High result of 72.7 FPS.

Q: What is the GPU’s memory bandwidth?

A: The NVIDIA GeForce RTX 4070 Ti has a memory bandwidth of 504.2 GB/s, using 12 GB of GDDR6X memory on a 192-bit bus.

CPU Role

The AMD Ryzen 9 9900X, with its 12 cores and 24 threads, plays a critical role in ensuring the GPU is fed with enough data, especially at lower resolutions. Its base clock of 4.40 GHz and boost clock of 5.60 GHz, combined with a large 64 MB L3 cache, provide substantial single-thread performance. This is crucial for Fivem, which is a multiplayer title that often relies on a few primary threads for game logic and physics. The CPU’s benchmark scores support this, with a Geekbench single-core score of 3341 and a Cinebench R23 single-core score of 6555. These numbers are near the top of the pack, indicating excellent per-core performance.

The CPU’s multi-threaded capabilities are also strong, with a Cinebench R23 multi-core score of 46438 and a Geekbench multi-core score of 19827. This means the CPU can handle background tasks and other game-related threads without slowing down the main game loop. The data shows that at 1080p Low, the system reaches 304.2 FPS, which is likely near the CPU’s limit for this game. Even at 1080p Ultra, the system achieves 151.6 FPS, a figure that suggests the CPU can still keep up with the GPU’s output. The Ryzen 9 9900X’s 94th percentile ranking against all CPUs confirms its high performance, but the measured FPS in Fivem shows that it is not the limiting factor in this combo. The CPU provides enough headroom for the GPU to be the primary driver of frame rate differences, particularly when moving from 1440p to 4K.

Measured FPS Breakdown

The following table details the exact average FPS measurements for all tested settings and resolutions.

• 1920x1080 Low: 304.2 FPS
• 1920x1080 Medium: 238.9 FPS
• 1920x1080 High: 194.8 FPS
• 1920x1080 Ultra: 151.6 FPS
• 2560x1440 Low: 203.4 FPS
• 2560x1440 Medium: 157 FPS
• 2560x1440 High: 124 FPS
• 2560x1440 Ultra: 96.6 FPS
• 3840x2160 Low: 112.5 FPS
• 3840x2160 Medium: 86.6 FPS
• 3840x2160 High: 72.7 FPS
• 3840x2160 Ultra: 55.5 FPS

The data reveals a consistent scaling pattern across all settings. At 1080p, the system is capable of very high frame rates, with even Ultra settings exceeding 150 FPS. The move to 1440p reduces performance by roughly one-third across all presets, and the move to 4K reduces it by another 30-40%. The largest absolute drop is from 1080p Low to 4K Low, a reduction of 191.7 FPS, while the smallest absolute drop is from 1440p Ultra to 4K Ultra, a reduction of 41.1 FPS. This indicates that the GPU’s performance scales almost linearly with resolution, confirming that the RTX 4070 Ti is the primary bottleneck at higher resolutions. The CPU’s influence is most visible at 1080p Low, where the 304.2 FPS figure is likely a ceiling imposed by the processor rather than the GPU. Overall, this combo excels at 1080p and 1440p gaming, offering high refresh rates with quality settings, but requires significant settings compromises to achieve a consistent 60 FPS experience at 4K.