Fivem

# Fivem with AMD Ryzen 7 9700F + AMD Radeon RX 7600

The AMD Ryzen 7 9700F paired with the AMD Radeon RX 7600 delivers a playable but resolution-sensitive experience in Fivem, ranking 2047th out of 3005 tested combos. The data shows a clear pattern: 1080p performance is strong across all settings, while 4K Ultra drops to 29 FPS, indicating the GPU becomes the primary constraint at higher resolutions. The CPU’s 94th percentile standing among all processors suggests headroom that the RX 7600 cannot fully exploit at 4K, but at 1080p the pairing delivers smooth frame rates even on Ultra presets.

FAQ

Q: What is the overall rank of this CPU and GPU combination in Fivem?

A: The combo ranks 2047th out of 3005 tested combinations, placing it in the lower-middle portion of the database. This rank reflects the GPU’s mid-tier positioning rather than CPU limitations, as the Ryzen 7 9700F sits in the 94th percentile among all CPUs.

Q: How does the Ryzen 7 9700F compare to its nearest CPU rivals?

A: The Ryzen 7 9700F scores an average benchmark of 69,996, which is 0.2% ahead of the AMD Ryzen 9 7940HX (69,875) and 0.7% ahead of the AMD Ryzen 9 7950X (69,515). It trails the Intel Core i7-14700KF by 0.2% (70,163) and the Intel Core i7-14700K by 0.9% (69,355). These deltas are minimal, indicating near-parity with top-tier CPUs.

Q: How does the RX 7600 compare to its nearest GPU rivals?

A: The RX 7600’s average benchmark score is 15,171, which is 0.2% behind the NVIDIA GeForce RTX 3050 OEM (15,199) and 0.7% behind the AMD Radeon 680M (15,270). It leads the AMD Radeon Pro 560X by 0.6% (15,082) and the NVIDIA GeForce GTX 660 Ti by 0.7% (15,063). The GPU sits in the 57th percentile among all GPUs.

Q: What is the best FPS achieved at 1080p with this combo?

A: At 1080p with Low settings, the combo achieves 160 FPS average, which is the highest measured result. Medium settings deliver 126 FPS, High settings produce 101 FPS, and Ultra settings yield 78 FPS. All 1080p results exceed 60 FPS, making this resolution fully playable.

Q: What is the worst FPS recorded for this combo?

A: The lowest average FPS is 29 at 4K Ultra settings. At 4K High, the average improves to 37 FPS, while 4K Medium reaches 46 FPS with a minimum of 39 FPS and maximum of 53 FPS. 4K Low achieves 58 FPS, barely crossing the 60 FPS threshold.

Q: Does the data show any settings where the combo fails to maintain playable frame rates?

A: Yes, at 4K resolution, both Ultra (29 FPS) and High (37 FPS) fall below the 60 FPS standard. 4K Medium (46 FPS) and 4K Low (58 FPS) also remain below 60 FPS. At 1440p, Ultra drops to 52 FPS, which is below 60 FPS, while all other 1440p settings exceed 60 FPS. Every 1080p setting stays above 60 FPS.

How This Combo Ranks

The combo’s rank of 2047 out of 3005 tested combinations places it in the 32nd percentile of all tested pairs in Fivem. This positioning is notably lower than the individual component percentiles would suggest — the CPU ranks in the 94th percentile and the GPU in the 57th percentile. The discrepancy indicates that Fivem’s performance ceiling for this pairing is constrained by the GPU, which is the weaker component in this matchup.

The Ryzen 7 9700F’s benchmark scores demonstrate substantial compute capability. Its PassMark multithread score of 36,470 and single-thread score of 4,691 place it among strong desktop processors. The CPU achieves 120,788 in integer math, 77,955 in floating-point math, and 42,1988 in data compression. These figures suggest the CPU is not the bottleneck in most gaming scenarios, including Fivem.

The RX 7600’s PassMark G3D score of 16,634 and 3DMark Steel Nomad DX12 score of 2,310 reflect a mid-range GPU. Its Geekbench OpenCL score of 88,051 and Vulkan score of 34,401 confirm this positioning. The GPU’s 57th percentile ranking means it outperforms a slight majority of all GPUs but falls behind top-tier models. In Fivem, this translates to playable frame rates at 1080p and 1440p with adjusted settings, but insufficient power for consistent 4K gameplay.

Comparing to the nearest rival combos, the CPU’s near-parity with the Intel Core i7-14700KF and AMD Ryzen 9 7950X suggests that swapping the CPU alone would yield minimal FPS changes in Fivem. The data shows the RX 7600 is the limiting factor — its rival comparisons against the RTX 3050 OEM and Radeon 680M show close scores, reinforcing that this GPU tier defines the combo’s overall rank.

Resolution Scaling

The measured FPS across resolutions reveals a steep performance drop as pixel count increases. At 1080p Low, the combo produces 160 FPS. Moving to 1440p Low drops this to 105 FPS, a reduction of 55 FPS or roughly 34%. At 4K Low, the average falls to 58 FPS, which is 102 FPS below the 1080p Low result — a 64% decrease.

For High settings, the scaling follows a similar pattern: 1080p High yields 101 FPS, 1440p High drops to 66 FPS, and 4K High falls to 37 FPS. The 4K High result is 36% of the 1080p High figure, showing that the GPU struggles as resolution increases. Medium settings show 126 FPS at 1080p, 83 FPS at 1440p, and 46 FPS at 4K. Ultra settings produce 78 FPS at 1080p, 52 FPS at 1440p, and 29 FPS at 4K.

The scaling pattern indicates that the RX 7600 is the limiting component at higher resolutions. At 1080p, the CPU can feed the GPU sufficiently, allowing frame rates to approach the GPU’s maximum output. At 4K, the GPU’s 8 GB VRAM and 288.0 GB/s bandwidth become stressed, and the measured FPS drops below playable thresholds for most settings. The CPU’s high benchmark scores suggest it could drive higher FPS if paired with a stronger GPU, but the RX 7600’s compute throughput — 21.75 TFLOPS FP32 — caps the frame rate at 4K.

The 1440p results show a middle ground. At 1440p Medium, the combo achieves 83 FPS with a minimum of 71 FPS and maximum of 95 FPS. This suggests that 1440p with Medium settings offers a balanced experience where neither component is severely bottlenecked. However, 1440p Ultra at 52 FPS indicates the GPU cannot sustain high frame rates with maximum graphical loads at this resolution.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest performance. Low settings produce 160 FPS average, the highest recorded figure. Medium settings achieve 126 FPS with a minimum of 107 FPS and maximum of 145 FPS, showing consistent frame pacing. High settings reduce the average to 101 FPS, still well above the 60 FPS threshold. Ultra settings yield 78 FPS, which remains playable but represents a 51% drop from Low settings.

At 2560x1440, performance declines noticeably. Low settings average 105 FPS, a 34% reduction from 1080p Low. Medium settings produce 83 FPS with a minimum of 71 FPS and maximum of 95 FPS, keeping frame times stable. High settings drop to 66 FPS, which is above 60 FPS but leaves little headroom for demanding scenes. Ultra settings fall to 52 FPS, below the 60 FPS standard and indicating that maximum graphical fidelity is not viable at this resolution.

At 3840x2160, the GPU becomes the clear bottleneck. Low settings average 58 FPS, just below 60 FPS. Medium settings achieve 46 FPS with a minimum of 39 FPS and maximum of 53 FPS, showing significant frame dips in demanding moments. High settings produce 37 FPS, and Ultra settings drop to 29 FPS. These 4K results demonstrate that the RX 7600 cannot maintain playable frame rates at this resolution with any preset, as even Low settings fail to reach 60 FPS.

The frame data shows a consistent pattern: each settings tier at a given resolution costs roughly 20-25% of the previous tier’s FPS. For example, at 1080p, moving from Low to Medium costs 34 FPS, Medium to High costs 25 FPS, and High to Ultra costs 23 FPS. At 4K, the absolute drops are smaller — Low to Medium costs 12 FPS, Medium to High costs 9 FPS, and High to Ultra costs 8 FPS — because the GPU is already operating near its limits.

GPU Role

The AMD Radeon RX 7600 is the performance-limiting component in this pairing for Fivem. Its 8 GB of GDDR6 memory on a 128-bit bus provides 288.0 GB/s of bandwidth, which is adequate for 1080p and 1440p but insufficient for 4K at high settings. The GPU’s boost clock of 2655 MHz and game clock of 2250 MHz represent its operating range, with a base clock of 1720 MHz.

The GPU’s compute specifications — 2,048 shading units, 128 TMUs, 64 ROPs, and 32 ray-tracing cores — produce 21.75 TFLOPS of FP32 throughput. This places the RX 7600 in the mid-range tier, as reflected by its 57th percentile ranking. The 3DMark Steel Nomad DX12 score of 2,310 and PassMark G3D score of 16,634 confirm this positioning.

In Fivem, the GPU’s role becomes more critical as resolution increases. At 1080p, the GPU can process frames fast enough to maintain high FPS across all settings, even Ultra at 78 FPS. At 1440p, the GPU’s workload increases, and Ultra settings drop to 52 FPS, showing that the GPU’s shading units and memory bandwidth are strained. At 4K, the GPU cannot keep up with the pixel count, resulting in sub-60 FPS for all settings.

The GPU’s nearest rival comparisons show it is closely matched with the RTX 3050 OEM (0.2% behind) and the Radeon 680M (0.7% behind), while leading the Radeon Pro 560X by 0.6% and GTX 660 Ti by 0.7%. These small deltas indicate that any of these GPUs would produce similar Fivem results, reinforcing that the RX 7600’s performance tier defines the combo’s 4K limitations.

The GPU’s 8 GB VRAM capacity is a key constraint at 4K. While the measured FPS data does not specify VRAM usage, the steep drop from 58 FPS at 4K Low to 29 FPS at 4K Ultra suggests that higher settings increase memory pressure beyond what the 8 GB buffer can comfortably handle. The 128-bit bus width also limits memory bandwidth, which becomes more critical at 4K where larger textures require faster data transfer.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution. For 1080p, Ultra settings at 78 FPS provide the best visual quality while maintaining playable frame rates. The 78 FPS average leaves some headroom above the 60 FPS threshold, and the absence of minimum FPS data for Ultra suggests the frame rate remains stable. If higher frame rates are preferred, High settings at 101 FPS or Medium at 126 FPS offer progressively smoother experiences with reduced visual fidelity.

For 1440p, Medium settings at 83 FPS represent the best balance. The minimum FPS of 71 FPS ensures that frame dips stay above 60 FPS, providing a consistent experience. High settings at 66 FPS are also viable, though the average is closer to the 60 FPS threshold, leaving less margin for demanding scenes. Ultra settings at 52 FPS fall below 60 FPS and are not recommended for competitive or fast-paced gameplay. Low settings at 105 FPS offer the smoothest experience but sacrifice visual quality.

For 4K, no settings achieve 60 FPS. Low settings at 58 FPS come closest but still fall short. Medium settings at 46 FPS with a minimum of 39 FPS show significant frame dips that could cause noticeable stuttering. High settings at 37 FPS and Ultra at 29 FPS are not playable for most users. The data indicates that 4K gaming is not viable with this combo; users targeting 4K should either reduce the resolution to 1440p or consider a more powerful GPU.

The measured rows show that the RX 7600’s performance ceiling in Fivem is reached at 1080p Ultra and 1440p Medium. The CPU’s high benchmark scores — including 4,691 single-thread and 36,470 multithread — ensure that it is not the bottleneck at these settings. The GPU’s 57th percentile ranking and 8 GB VRAM capacity are the determining factors for the settings recommendations above. For the best overall experience, 1080p Ultra at 78 FPS offers the highest visual fidelity with playable performance, while 1440p Medium at 83 FPS provides a higher resolution with smooth frame rates and stable minimum FPS.