Barony

The AMD Ryzen 7 9700F and AMD Radeon RX 7600 combination delivers a remarkably consistent experience in Barony, a roguelike that does not demand the absolute highest-end hardware but still rewards a balanced platform. Across the full matrix of tested resolutions and settings, the measured data shows a system that keeps frame rates playable even at 4K, with the CPU’s eight Zen 5 cores and 16 threads proving more than sufficient for this title’s workload. The GPU, based on the RDNA 3.0 architecture with 8 GB of GDDR6 memory, becomes the primary scaling factor as resolution rises, yet the pairing never falls below a usable threshold in any measured configuration. This combo ranks 2007 out of 2935 tested combinations in Barony, placing it in the lower-middle portion of the database, which reflects a sensible mid-range pairing rather than an enthusiast-class setup.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 7 9700F is an eight-core, 16-thread processor built on the Zen 5 architecture, codenamed Granite Ridge, and manufactured on a 4 nm process at TSMC. Its base clock is 3.80 GHz, boosting up to 5.50 GHz, with a 65 W TDP that keeps thermals manageable in a desktop build. The CPU’s cache hierarchy includes 80 KB of L1 per core, 1 MB of L2 per core, and a shared 32 MB L3 cache, which provides ample on-die storage for game data. Memory support is DDR5 over a dual-channel bus, yielding a bandwidth of 89.6 GB/s, and the chip uses the AMD Socket AM5 platform with PCIe Gen 5, 24 lanes from the CPU. It launched in September 2025 with a launch MSRP of $289.

In Barony specifically, the benchmark results indicate that the CPU is rarely the limiting factor. At 1080p Low, the combination reaches an average of 288 FPS, which is far beyond what most displays can show and demonstrates that the processor can feed the GPU without bottlenecking even at low graphical loads. The Passmark single-thread score of 4691 and multithread score of 36470 highlight strong per-core performance, which matters for a roguelike that often relies on game logic, pathfinding, and procedural generation. The data compression score of 421988 and integer math score of 120788 further indicate robust computational throughput, though these are synthetic metrics rather than direct game benchmarks. The CPU’s percentile ranking versus all CPUs is 94, meaning it outperforms the vast majority of processors in the database, and its nearest rivals include the AMD Ryzen 9 7940HX with an average score of 69875 and a delta of 0.2%, the Intel Core i7-14700KF at 70163 with a delta of -0.2%, the AMD Ryzen 9 7950X at 69515 with a delta of 0.7%, and the Intel Core i7-14700K at 69355 with a delta of 0.9%. These deltas are all within one percentage point, indicating that the 9700F sits in a tightly contested performance band.

Given that the CPU’s average benchmark score is 69996, and its rivals are all within a fraction of a percent, the processor’s contribution to Barony’s frame rates is consistent with a high-end desktop part. The game’s roguelike nature, with turn-based elements and dungeon generation, does not stress multi-core scaling as heavily as modern shooters or strategy titles, so the 16 threads are more than adequate. The boost clock of 5.50 GHz ensures that any single-threaded tasks, such as AI calculations or inventory management, are handled with minimal latency. In practice, the measured FPS at 1080p Ultra (132 average) versus 1080p Low (288 average) shows that the CPU can sustain high frame rates even when the GPU is pushed harder, but the gap also suggests that the graphics card begins to dominate performance as settings increase.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the highest average frame rate recorded for this CPU and GPU combo in Barony?

A: The highest average frame rate is 288 FPS, achieved at 1920x1080 resolution with Low settings.

Q: How does the Ryzen 7 9700F compare to its nearest rival, the Intel Core i7-14700KF?

A: The Ryzen 7 9700F has an average benchmark score of 69996, while the Intel Core i7-14700KF scores 70163, resulting in a delta of -0.2%, meaning the Intel part is marginally faster by less than a quarter of a percent.

Q: What is the lowest average frame rate in the measured data, and under what conditions?

A: The lowest average frame rate is 43 FPS, recorded at 3840x2160 resolution with Ultra settings, which is still technically playable but below the 60 FPS threshold.

Q: Does the combo maintain a 60 FPS average at 4K resolution?

A: Yes, at 3840x2160 with High settings, the average FPS is 61, and at Medium settings it is 71, though Ultra drops to 43 and Low rises to 95.

Q: What is the GPU’s percentile ranking among all tested graphics cards?

A: The AMD Radeon RX 7600 has a percentile rank of 57, meaning it outperforms 57% of all GPUs in the database, placing it in the mid-range tier.

Q: How does the GPU’s Passmark G3D score compare to its nearest rival, the NVIDIA GeForce RTX 3050 OEM?

A: The RX 7600 has a Passmark G3D score of 16634, while the RTX 3050 OEM scores 15199, giving the AMD card a delta of -0.2% when compared inversely, meaning the RX 7600 is slightly faster by that margin.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data across resolutions reveals a clear pattern of GPU-bound performance at higher settings, with the CPU providing ample headroom. At 1080p Low, the combo hits 288 FPS average, which drops to 182 FPS at 1440p Low and further to 95 FPS at 4K Low. That represents a 67% reduction from 1080p to 4K at Low settings, indicating that the RX 7600’s rendering throughput is the primary constraint. The GPU’s 8 GB of GDDR6 memory on a 128-bit bus, with a bandwidth of 288.0 GB/s, is sufficient for Barony’s modest textures, but the pixel throughput of 169.9 GPixel/s and texture rate of 339.8 GTexel/s become bottlenecks as resolution increases.

At Medium settings, the scaling is similar: 214 FPS at 1080p, 135 FPS at 1440p, and 71 FPS at 4K. The drop from 1080p to 1440p is 37%, and from 1440p to 4K is 47%, showing that the GPU’s workload scales non-linearly with pixel count. High settings yield 184 FPS at 1080p, 116 FPS at 1440p, and 61 FPS at 4K, where the 4K result barely clears the 60 FPS mark. Ultra settings are the most demanding: 132 FPS at 1080p, 83 FPS at 1440p, and 43 FPS at 4K. The 4K Ultra result is the only configuration that falls below 60 FPS, and it does so by a significant margin, suggesting that the RX 7600’s 21.75 TFLOPS of FP32 compute is insufficient for maximum settings at that resolution.

The data indicates that the CPU is not the limiting factor at any resolution. Even at 1080p Low, where frame rates exceed 280 FPS, the Ryzen 7 9700F’s single-thread performance of 4691 on Passmark ensures that game logic does not become a bottleneck. The roguelike genre typically involves procedural dungeon generation and enemy AI, which are compute-intensive but not heavily multi-threaded, and the 5.50 GHz boost clock handles these tasks efficiently. The GPU, on the other hand, shows clear scaling limitations: its Passmark G3D score of 16634 and a percentile rank of 57 place it in the mid-range, and the measured frame rates confirm that lowering resolution or settings is necessary to maintain high refresh rates. The combo’s rank of 2007 out of 2935 in Barony further supports this, as it sits below the median, indicating that while the CPU is powerful, the GPU holds the system back in more demanding scenarios.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

At 1920x1080, the combination delivers its strongest performance. Low settings produce an average of 288 FPS, which is the highest recorded value in the entire dataset. Medium settings average 214 FPS, with a minimum of 182 and a maximum of 246, showing some variance but remaining far above any playability concern. High settings average 184 FPS, a drop of 14% from Medium, while Ultra settings average 132 FPS, a further 28% reduction. The Ultra result is still well above the 60 FPS threshold, making 1080p a comfortable environment for this pairing at any settings level. The minimum FPS values are only recorded for Medium settings, at 182 FPS, which suggests that frame pacing is consistent enough that the system rarely dips below that mark even in demanding scenes.

Moving to 2560x1440, the performance remains strong but begins to show the GPU’s limitations. Low settings average 182 FPS, which is exactly the same as the 1080p Medium minimum, indicating that the resolution increase has a notable impact. Medium settings average 135 FPS, with a minimum of 115 and a maximum of 155, which is still smooth for most displays. High settings average 116 FPS, and Ultra settings average 83 FPS. The drop from Low to Ultra at 1440p is 54%, from 182 to 83 FPS, which is a significant but expected reduction given the increased pixel count and shading load. The RX 7600’s 2048 shading units and 64 ROPs are working harder at this resolution, and the data shows that High settings are the sweet spot for maintaining a high refresh rate experience.

At 3840x2160, the GPU becomes the clear bottleneck. Low settings average 95 FPS, which is still playable, but Medium settings drop to 71 FPS with a minimum of 60 and a maximum of 81. High settings average 61 FPS, barely hitting the 60 FPS mark, and Ultra settings plummet to 43 FPS, which is below the threshold for smooth gameplay on most monitors. The scaling from 1080p to 4K is steep: Low settings lose 67% of performance (288 to 95 FPS), Medium loses 67% (214 to 71 FPS), High loses 67% (184 to 61 FPS), and Ultra loses 67% (132 to 43 FPS). This consistent percentage drop across settings indicates that the GPU’s fill rate and memory bandwidth are the limiting factors, not the CPU or game engine. The 8 GB memory size is adequate for Barony’s textures, but the 128-bit bus and 288.0 GB/s bandwidth constrain data movement at 4K resolutions.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combo’s rank in Barony is 2007 out of 2935 tested combinations, placing it in the 68th percentile of all tested systems, meaning roughly 68% of combinations perform better in this game. This is a mid-pack result that reflects the GPU’s mid-range positioning rather than the CPU’s high-end capabilities. The Ryzen 7 9700F itself ranks in the 94th percentile among all CPUs, but the RX 7600 only ranks in the 57th percentile among GPUs, so the pairing’s overall rank is dragged down by the graphics card. In the database’s context, this means that many combinations with weaker CPUs but stronger GPUs will outperform it in Barony, especially at higher resolutions and settings where GPU-bound performance dominates.

Looking at the nearest rivals for the GPU, the RX 7600’s average benchmark score is 15171, with the NVIDIA GeForce RTX 3050 OEM scoring 15199 (delta -0.2%), the AMD Radeon Pro 560X scoring 15082 (delta 0.6%), the AMD Radeon 680M scoring 15270 (delta -0.7%), and the NVIDIA GeForce GTX 660 Ti scoring 15063 (delta 0.7%). These deltas are all within one percentage point, indicating that the RX 7600 is essentially equivalent to these cards in synthetic benchmarks, though its real-world performance in Barony may vary due to driver optimizations and API support. The GPU supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, which ensures compatibility with modern game engines.

The combo’s rank of 2007 suggests that for Barony, which is a roguelike with relatively modest graphical demands, the system is adequate but not exceptional. Many mid-range and high-end GPUs will push higher frame rates at 4K, and the RX 7600’s 8 GB memory and 128-bit bus are limiting factors in that scenario. However, the CPU’s strong single-thread performance ensures that the game runs smoothly at lower resolutions, where the frame rates are among the highest in the database for this game. In the context of the full dataset, this combo sits in the lower half, meaning it is not a top performer, but it also avoids the bottom tier where playability would be compromised.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured FPS data, the optimal settings depend on the target resolution and refresh rate. For 1920x1080, the Ultra preset delivers an average of 132 FPS, which is more than sufficient for a 120 Hz or 144 Hz monitor, and the High preset at 184 FPS offers even more headroom for high-refresh displays. The Medium preset at 214 FPS is overkill for most monitors, and Low at 288 FPS provides no practical benefit unless the user has a 240 Hz or 360 Hz display. For 1080p, Ultra is the recommended preset because it achieves the highest visual quality while maintaining frame rates far above the 60 FPS baseline, and the data shows no minimum FPS issues at this resolution.

At 2560x1440, the High preset averages 116 FPS, which is ideal for a 144 Hz monitor, while the Medium preset averages 135 FPS with a minimum of 115, providing a smoother experience with slightly reduced visuals. The Ultra preset at 83 FPS is still playable but may not fully utilize a high-refresh display. For most users at 1440p, High is the best balance, as it delivers near-maximum visual fidelity without sacrificing frame rate. The Low preset at 182 FPS is unnecessary unless the user prioritizes frame rate over all else, and the Ultra preset’s 83 FPS is acceptable but not optimal for competitive play.

At 3840x2160, the choices are more constrained. The High preset averages 61 FPS, which barely meets the 60 FPS threshold and is suitable for a 60 Hz display, but any higher refresh rate would result in screen tearing or stuttering. The Medium preset averages 71 FPS, offering a more comfortable margin above 60 FPS, with a minimum of 60 and a maximum of 81. The Low preset at 95 FPS is the smoothest option at 4K, though it sacrifices visual quality. The Ultra preset at 43 FPS is not recommended, as it falls below the playable threshold for most users. For 4K, the Medium preset is the recommended choice, as it maintains a minimum of 60 FPS and an average of 71 FPS, providing a good balance between visual quality and performance. The High preset is acceptable for 60 Hz displays, but the Medium preset offers greater stability.

Overall, the data indicates that this combo is best suited for 1080p and 1440p gaming, where it can deliver high frame rates at maximum settings. At 4K, the GPU becomes the limiting factor, and users should either lower settings to Medium or accept a 60 FPS cap at High. The CPU’s performance is never a concern, as even at 1080p Low with 288 FPS, the Ryzen 7 9700F has ample headroom. The measured FPS values, combined with the combo’s rank of 2007 out of 2935, suggest that this is a balanced mid-range system that excels at mainstream resolutions but falls short of enthusiast-level 4K performance.