Fivem

The AMD Ryzen 7 5700G and NVIDIA GeForce RTX 3070 Ti combination delivers a performance profile in Fivem that is heavily dependent on resolution and quality preset, with the data showing a clear shift from a CPU-bound scenario at 1080p to a GPU-bound one at 4K. The measured frame rates reveal that while the RTX 3070 Ti can push very high refresh rates at lower resolutions, the 8-core, 16-thread Ryzen 7 5700G keeps average FPS above the 60 FPS threshold at 4K High settings, though Ultra presets demand more from the GPU than it can deliver at that resolution.

FAQ

Q: What is the average FPS at 1080p with Low settings?

A: The measured average FPS is 226.7, which is the highest frame rate recorded for this combo in Fivem and indicates a strong CPU performance headroom at this resolution.

Q: How does the RTX 3070 Ti's average benchmark score compare to its closest rival?

A: The GPU's average benchmark score is 30849, which is 0.8% lower than the AMD Radeon RX 6700's score of 31112, placing it in a very tight competitive band.

Q: What is the performance difference between 1080p and 4K at High settings?

A: The average FPS drops from 139.6 at 1920x1080 to 48.7 at 3840x2160, a reduction of 90.9 FPS that demonstrates the increased rendering load on the GPU at higher resolutions.

Q: What is the combo's rank among all tested combinations in Fivem?

A: The combo ranks 706 out of 1792 tested combinations, placing it in the upper-middle portion of the database for this specific game.

Q: What is the CPU's single-thread performance score in Cinebench R23?

A: The Ryzen 7 5700G scores 2930 points in the Cinebench R23 single-core test, which is relevant for Fivem's multiplayer scenarios that often rely on single-thread performance.

Q: What is the memory bandwidth of the RTX 3070 Ti?

A: The GPU has a memory bandwidth of 608.3 GB/s, supported by 8 GB of GDDR6X memory on a 256-bit bus, which provides ample data throughput for high-resolution textures.

GPU Role

The NVIDIA GeForce RTX 3070 Ti plays a decisive role in determining Fivem's performance ceiling at higher resolutions and quality settings. The GPU's 8 GB of GDDR6X memory and 608.3 GB/s bandwidth are substantial, yet the data shows that at 4K Ultra settings, the average FPS falls to 43.1, indicating the GPU's processing capacity is saturated. The base clock of 1575 MHz and boost clock of 1770 MHz for the GA104 chip are the driving factors behind this, with the 6144 shading units working to render the game's geometry and effects.

At lower resolutions like 1080p, the RTX 3070 Ti's role shifts from being the primary limiter to a component that can easily keep up with the CPU's output. The 226.7 FPS average at 1080p Low settings demonstrates that the GPU has significant headroom, but as settings increase to Ultra, the average drops to 113.2 FPS, showing the impact of shader complexity and memory usage on the GPU's frame rendering time. The 21.75 TFLOPS FP32 performance figure is a theoretical measure, but the measured FPS data confirms that this compute capacity is best utilized when the resolution is kept in check.

The GPU's 96 ROPs and 192 TMUs are critical for pixel fill and texture filtering, which become more demanding at 4K. The pixel rate of 169.9 GPixel/s and texture rate of 339.8 GTexel/s are sufficient for 1440p High settings, where the combo achieves 93.6 FPS, but the 4K Ultra result of 43.1 FPS suggests that the GPU's memory subsystem and shader throughput are the limiting factors. The VRAM capacity of 8 GB is not the primary bottleneck in this data, as even the most demanding preset at 4K does not show a catastrophic failure, but rather a gradual performance degradation.

Resolution Scaling

The measured FPS data reveals a predictable scaling pattern across resolutions, with frame rates decreasing as pixel count increases. At Low settings, the average FPS drops from 226.7 at 1080p to 145.6 at 1440p, a 35.8% reduction, and then to 81.7 at 4K, a 44% reduction from the 1440p figure. This scaling pattern indicates that the limiting component shifts from the CPU at 1080p to the GPU as resolution increases, because the CPU's workload remains relatively constant while the GPU's rendering load grows exponentially.

For Medium settings, the averages are 180.9 FPS at 1080p, 116.5 FPS at 1440p, and 65.9 FPS at 4K. The drop from 1440p to 4K is 50.6 FPS, which is a larger absolute decrease than the 64.4 FPS drop from 1080p to 1440p, suggesting that the GPU is becoming less efficient at filling the higher pixel count. The High preset shows a similar trend: 139.6 FPS at 1080p, 93.6 FPS at 1440p, and 48.7 FPS at 4K. The Ultra preset has the steepest scaling curve, with 113.2 FPS at 1080p, 71.5 FPS at 1440p, and 43.1 FPS at 4K.

The data indicates that the Ryzen 7 5700G's 8 cores and 16 threads are sufficient to maintain high frame rates at 1080p, where the CPU's single-thread performance (2930 in Cinebench R23) is a key factor. However, at 4K, the GPU's rendering workload dominates, and the average FPS values converge across presets, with a narrow range from 43.1 to 81.7 FPS. This convergence is evidence that the RTX 3070 Ti is the primary limiting component at 4K, regardless of quality settings, because the GPU's fill rate and shader processing are the bottlenecks.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates across all presets. The Low preset yields an average of 226.7 FPS, which is ideal for high-refresh-rate monitors. Medium settings produce 180.9 FPS, while High settings reduce the average to 139.6 FPS. The Ultra preset, with its maximum visual fidelity, still maintains a playable average of 113.2 FPS. These numbers suggest that at 1080p, the CPU and GPU combination has enough headroom to handle even the most demanding settings without dropping below 100 FPS.

Moving to 2560x1440, the frame rates decrease but remain robust. Low settings achieve 145.6 FPS, Medium settings reach 116.5 FPS, and High settings maintain 93.6 FPS. The Ultra preset at 1440p averages 71.5 FPS, which is still above the 60 FPS threshold for smooth gameplay but shows a significant 36.8% reduction compared to the 1080p Ultra result. The 1440p data indicates that the GPU is starting to become a more significant factor, as the delta between Low and Ultra presets narrows from 113.5 FPS at 1080p to 74.1 FPS at 1440p.

At 3840x2160, the performance is markedly lower. Low settings produce an average of 81.7 FPS, Medium settings drop to 65.9 FPS, and High settings fall to 48.7 FPS. The Ultra preset averages only 43.1 FPS, which is below the standard 60 FPS target for many users. The difference between Low and Ultra at 4K is 38.6 FPS, a much smaller gap than at lower resolutions, confirming that the GPU's rendering capacity is the primary constraint. The average FPS across all 4K presets is 59.85, highlighting that only the Low and Medium presets provide a consistently smooth experience.

How This Combo Ranks

The combo's rank of 706 out of 1792 tested combinations in Fivem places it in the 39.4th percentile of all tested systems, indicating that it offers above-average performance for this game but is not at the top tier. This ranking is influenced by the CPU's overall benchmark score of 25626, which is 83rd percentile among all CPUs, and the GPU's average benchmark score of 30849, which is 74th percentile among all GPUs. The CPU's nearest rival, the AMD Ryzen 7 6800U, has a score of 25706, which is 0.3% higher, while the Intel Xeon D-2752TER is 0.4% lower at 25532. These marginal differences suggest that the CPU's performance is well-balanced within its peer group.

For the GPU, the nearest rival is the AMD Radeon RX 6700, which has an average score of 31112, placing it 0.8% ahead of the RTX 3070 Ti. The NVIDIA Quadro M5000 is 0.9% behind, and the NVIDIA GRID M60-1Q is 1.2% behind, showing that the RTX 3070 Ti is tightly clustered with these alternatives in synthetic benchmarks. However, in Fivem specifically, the combo's rank of 706 suggests that the game's workload favors other configurations, possibly those with more VRAM or a different balance of CPU and GPU performance. The data shows that this combo performs well in the middle tier of the database, with room for improvement at 4K Ultra settings.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution and desired frame rate. For 1080p displays, the Ultra preset is the best choice, as it delivers an average of 113.2 FPS, which is well above the 60 FPS threshold and provides the highest visual quality without sacrificing smoothness. If a higher refresh rate is preferred, the High preset at 139.6 FPS offers a good balance, but the Ultra preset is still fully playable.

At 1440p, the High preset is recommended, with an average of 93.6 FPS that provides a smooth experience with high visual fidelity. The Medium preset at 116.5 FPS is a viable alternative for users who prioritize frame rate over visual detail, but High is the sweet spot for most users. The Ultra preset at 71.5 FPS is acceptable for those who want maximum quality, but it is closer to the edge of the playable range.

For 4K resolution, the Low preset is the only setting that provides a consistently high frame rate, with an average of 81.7 FPS. The Medium preset at 65.9 FPS is still playable and offers better visuals, but the High preset at 48.7 FPS and Ultra at 43.1 FPS are below the 60 FPS target and may result in noticeable stuttering. Therefore, the Medium preset at 4K is the best recommendation for a balance of visual quality and performance, as it remains above 60 FPS and avoids the significant quality reduction of the Low preset.