Fivem

# Fivem Performance Analysis: AMD Ryzen 5 7600 + NVIDIA GeForce RTX 3070 Ti

The measured frame rates for this combination across three resolutions and four quality presets reveal a system that scales predictably with both resolution and settings, with the RTX 3070 Ti acting as the primary bottleneck at 4K while the Ryzen 5 7600 demonstrates sufficient headroom at lower resolutions. The combo ranks 724th out of 1792 tested configurations, placing it in the upper-middle tier of Fivem performance, and the data indicates that users can expect smooth gameplay at 1440p with high settings, though 4K Ultra pushes the GPU past its comfortable operating range.

Resolution Scaling

The FPS drop from 1080p to 4K is steep but consistent across all settings presets, indicating a GPU-bound workload at higher resolutions. At Low settings, the average frame rate falls from 225.5 FPS at 1080p to 148.4 FPS at 1440p—a reduction of 34.2%—and then to 79.8 FPS at 4K, representing a 64.6% drop from the 1080p baseline. This scaling pattern is typical for a title where pixel throughput becomes the limiting factor as resolution increases, and the RTX 3070 Ti's 8 GB of GDDR6X memory and 608.3 GB/s bandwidth are increasingly taxed at 4K.

The Medium preset shows a similar trajectory: 179.4 FPS at 1080p, 115.5 FPS at 1440p, and 68.2 FPS at 4K. The percentage drop from 1080p to 4K here is 62.0%, nearly identical to the Low preset's 64.6%, which suggests that the resolution penalty is relatively independent of the graphics workload. However, at High settings, the scaling shifts slightly: 140.8 FPS at 1080p drops to 92.6 FPS at 1440p (a 34.2% reduction, matching the Low preset's 1440p drop) and then to 50.5 FPS at 4K, a 64.1% decline from 1080p. The consistency of these percentage drops across presets reinforces that resolution scaling in Fivem is dominated by GPU rasterization throughput rather than memory or bandwidth constraints.

Ultra settings exhibit the most dramatic scaling, with 111.9 FPS at 1080p falling to 70.2 FPS at 1440p (37.3% drop) and then to 37.8 FPS at 4K (66.2% drop from 1080p). The 4K Ultra result is the only measured configuration that falls below 40 FPS, indicating that this preset at 4K is not viable for smooth gameplay. The data suggests that the GPU's 21.75 TFLOPS FP32 throughput and 169.9 GPixel/s pixel rate are adequate for 1080p and 1440p but insufficient for 4K at higher quality settings. The transition from 1440p to 4K incurs a larger relative penalty than from 1080p to 1440p across all presets, which points to the GPU's memory subsystem—specifically its 8 GB capacity—becoming a more significant factor at 4K.

GPU Role

The RTX 3070 Ti, based on the GA104 chip with 6144 shading units, 192 TMUs, and 96 ROPs, delivers a peak FP32 throughput of 21.75 TFLOPS. Its boost clock of 1770 MHz and base clock of 1575 MHz are the primary drivers of compute performance, while the 8 GB GDDR6X memory operates at 19 Gbps effective across a 256-bit bus, yielding 608.3 GB/s bandwidth. The GPU's passmark G3D score of 23356 places it at the 74th percentile among all GPUs, and its average benchmark score of 30849 is within 0.8% of the AMD Radeon RX 6700 (31112) and 0.9% of the NVIDIA Quadro M5000 (31142), indicating that this GPU sits in a tightly contested performance tier.

In Fivem, the GPU's role becomes evident when examining the 4K results. At 4K Low, the card manages 79.8 FPS, but raising the preset to Medium drops performance to 68.2 FPS—a 14.5% reduction—and High further reduces it to 50.5 FPS. The Ultra preset at 4K delivers only 37.8 FPS, a 52.6% decrease from the Low preset at the same resolution. This steep settings sensitivity at 4K suggests that the GPU's shading units and ROPs are fully saturated, and the 8 GB frame buffer may be causing additional pressure as texture sizes and draw distances increase with higher presets.

At 1440p, the GPU shows more headroom: Low settings produce 148.4 FPS, Medium 115.5 FPS, and High 92.6 FPS, with Ultra dropping to 70.2 FPS. The delta between Low and Ultra at 1440p is 52.7%, which is nearly identical to the 52.6% delta at 4K, indicating that the relative cost of each preset tier is consistent regardless of resolution. However, the absolute performance at 1440p is sufficient for high-refresh-rate monitors at Medium and Low, while High and Ultra remain playable at 60 FPS or above. The GPU's 74th percentile ranking and the fact that its nearest rivals include the RX 6700 and Quadro M5000—both with average scores within 1.2%—suggest that this GPU is a mid-to-upper-tier part that excels at 1080p and 1440p but struggles at 4K with quality settings above Medium.

CPU Role

The Ryzen 5 7600 is a 6-core, 12-thread processor based on the Zen 4 architecture, fabricated on a 5 nm process by TSMC. Its base clock of 3.80 GHz and boost clock of 5.10 GHz, combined with 32 MB of shared L3 cache and 6 MB of L2 cache (1 MB per core), position it as a strong gaming CPU. The processor's 3DMark single-thread score of 999 and multi-thread score of 6503, along with a Cinebench R23 multi-core score of 22992 and single-core score of 3246, indicate robust performance per core, which is critical for Fivem's multiplayer workloads that often depend on a few heavily utilized threads.

The CPU's average benchmark score of 26617 places it at the 83rd percentile among all CPUs, and its nearest rivals include the AMD Ryzen 7 5800X3D (avgScore 26574, deltaPct 0.2%) and the Intel Core i9-12900HK (avgScore 26672, deltaPct -0.2%). This tight grouping—within 0.3% of three different rivals—shows that the 7600 is competitively positioned in synthetic benchmarks, though its real-world Fivem performance is influenced by its 6-core/12-thread configuration and the game's engine behavior.

In Fivem, the CPU's role can be inferred from the frame rate scaling at 1080p, where the GPU is less likely to be the bottleneck. At 1080p Low, the system delivers 225.5 FPS, which is a high value that suggests the CPU can feed the GPU adequately even at low graphical loads. The 1080p Medium result of 179.4 FPS and High result of 140.8 FPS show that the CPU maintains a strong frame delivery pipeline, but the Ultra preset at 111.9 FPS indicates that the GPU begins to take over as the limiting factor even at 1080p when settings are maxed. The fact that 1080p Low exceeds 200 FPS demonstrates that the Ryzen 5 7600's single-thread performance—evidenced by its PassMark single-thread score of 3910 and 3DMark single-thread score of 999—is sufficient for high-refresh-rate gameplay in this title.

The CPU's 65 W TDP and dual-channel DDR5 memory support with 83.2 GB/s bandwidth provide adequate data throughput for Fivem's world-streaming and entity-update tasks. The 12 threads handle the game's background simulation and network processing, though the 3DMark 16-thread score of 6499 versus max-thread score of 6503 indicates that scaling beyond 12 threads yields minimal gains, which is typical for a 6-core/12-thread part. The 1 MB L2 cache per core and 32 MB shared L3 cache help reduce memory latency, which is beneficial for the game's frequently accessed data structures. Overall, the CPU does not appear to be a limiting factor in the measured frame rates, as evidenced by the consistent resolution scaling that points to GPU saturation at higher resolutions.

Settings Recommendations

Based on the measured FPS rows, the optimal experience depends on the target resolution and refresh rate. At 1080p, the High preset delivers 140.8 FPS, which is well above 60 FPS and suitable for high-refresh-rate monitors, while the Medium preset at 179.4 FPS offers an even smoother experience with only a modest visual trade-off. The Low preset at 225.5 FPS is excessive for most displays and sacrifices visual quality for frame rates that exceed typical monitor refresh rates. The Ultra preset at 111.9 FPS remains playable but provides diminishing returns over High, making High the recommended choice for 1080p gamers who want a balance of visual fidelity and performance.

At 1440p, the High preset produces 92.6 FPS, which is comfortably above 60 FPS and provides a strong experience for 1440p monitors with refresh rates up to 144 Hz. The Medium preset at 115.5 FPS is the best option for users prioritizing frame rate over visual detail, while the Low preset at 148.4 FPS is unnecessarily demanding on the GPU relative to the gains. The Ultra preset at 70.2 FPS is still playable, but the 22.4 FPS drop from High to Ultra (a 24.2% reduction) is significant for a marginal visual improvement, so High is the recommended preset at 1440p.

At 4K, the situation is more constrained. The Low preset at 79.8 FPS is the only option that exceeds 60 FPS, making it the sole viable choice for smooth 4K gameplay. The Medium preset at 68.2 FPS is borderline playable but may suffer from frame-time inconsistencies near 60 FPS. The High preset at 50.5 FPS and Ultra at 37.8 FPS are below the 60 FPS threshold and would result in noticeable stutter or reduced responsiveness. For 4K users, the Low preset is the only recommendation, and those seeking higher visual quality should consider dropping to 1440p and using High settings, which delivers 92.6 FPS—a 16.0 FPS improvement over 4K Low while providing superior image quality.

FAQ

Q: What is the best preset for 1440p gaming with this hardware?

A: The High preset at 1440p delivers 92.6 FPS, which is above 60 FPS and provides a strong balance of visual quality and performance. The Medium preset at 115.5 FPS is better for high-refresh-rate displays, but High offers the best overall experience for most users.

Q: Can this system handle 4K gaming in Fivem?

A: At 4K, only the Low preset exceeds 60 FPS with 79.8 FPS. The Medium preset at 68.2 FPS is playable, but High (50.5 FPS) and Ultra (37.8 FPS) fall below the 60 FPS threshold, making 4K gaming viable only at lower settings.

Q: How does the Ryzen 5 7600 compare to its nearest rivals in synthetic benchmarks?

A: The Ryzen 5 7600 has an average benchmark score of 26617, which is 0.2% ahead of the AMD Ryzen 7 5800X3D (26574) and 0.2% ahead of the AMD EPYC 8024P (26555), while being 0.2% behind the Intel Core i9-12900HK (26672) and 0.3% ahead of the Intel Core i9-11900K (26546).

Q: Is the RTX 3070 Ti's 8 GB memory sufficient for Fivem at high settings?

A: The 8 GB GDDR6X memory with 608.3 GB/s bandwidth appears sufficient at 1080p and 1440p, where High settings deliver 140.8 FPS and 92.6 FPS respectively. At 4K, the performance drop to 50.5 FPS at High suggests memory capacity or bandwidth becomes a limiting factor at that resolution.

Q: What frame rate can I expect at 1080p with Ultra settings?

A: The Ultra preset at 1080p produces 111.9 FPS, which is above 60 FPS and suitable for most monitors. However, the High preset at 140.8 FPS offers a 28.9 FPS improvement, making High a better choice for competitive play.

Q: How does this combo rank among all tested configurations for Fivem?

A: This combination ranks 724th out of 1792 tested combos, placing it in the upper-middle tier. The GPU's 74th percentile ranking and CPU's 83rd percentile ranking suggest the system is well-matched, with neither component dramatically outperforming the other.