Fivem

The AMD Ryzen 5 8400F paired with the Intel Arc B570 delivers a highly resolution-dependent experience in Fivem. The data shows a clear progression where performance scales predictably with pixel count, but the magnitude of the drop-off reveals a system that is heavily constrained by its graphics processor at higher resolutions. This analysis breaks down the measured results, contextualizes the components' roles, and offers practical settings guidance based on the benchmark data.

Resolution Scaling

The measured FPS data illustrates a steep performance curve as resolution increases. At 1920x1080 with Low settings, the combo achieves an average of 136 FPS. Moving to 2560x1440 at the same Low preset, the average drops to 89 FPS, a decrease of 47 FPS or roughly 35% lower. The scaling continues to 3840x2160, where the average falls to 50 FPS, another 39 FPS reduction from the 1440p figure. This pattern indicates that the GPU is the primary limiting factor; as the pixel workload grows, the Arc B570's capabilities are progressively overwhelmed.

The gap between settings widens dramatically at higher resolutions. At 1080p, the difference between Low (136 FPS) and Ultra (67 FPS) is 69 FPS, a substantial 51% reduction. At 1440p, the spread between Low (89 FPS) and Ultra (44 FPS) is 45 FPS, or 51% as well. However, at 4K, the range tightens: Low yields 50 FPS, Medium 39 FPS, High 31 FPS, and Ultra just 24 FPS. The absolute deltas remain similar in percentage, but the playability cliff becomes steeper because the starting point is so much lower. At 4K Ultra, the system is clearly struggling, with an average below 30 FPS.

The scaling behavior suggests that while the CPU has enough headroom to push high frame rates at 1080p, the GPU saturates quickly. For example, the jump from 1440p Low (89 FPS) to 4K Low (50 FPS) represents a 44% reduction, which is roughly in line with the 2.25x pixel increase from 3.7 million to 8.3 million pixels. This linearity indicates that the Intel Arc B570 is the bottleneck; a stronger GPU would likely show a smaller drop because the CPU could feed more frames. Conversely, the CPU's 6-core, 12-thread configuration with a 4.20 GHz base clock appears sufficient for the game's engine at these settings, as the frame rate loss tracks GPU load rather than CPU core saturation.

GPU Role

The Intel Arc B570 is built on the Xe2-HPG architecture and features 2304 shading units, 144 texture mapping units, and 80 raster output pipelines. Its base and boost clocks are both 2500 MHz, and it comes with 10 GB of GDDR6 memory on a 160-bit bus, providing 380.0 GB/s of bandwidth. In Fivem, these specifications translate to a GPU that can handle 1080p and 1440p gameplay reasonably well at medium presets, but the 4K results show its limits.

The memory configuration is particularly relevant for Fivem, which is a multiplayer modification framework that can be demanding on VRAM due to player-created content and large city environments. The 10 GB frame buffer is adequate for 1080p and 1440p, as evidenced by the playable frame rates at those resolutions. However, at 4K, the higher memory pressure and bandwidth requirements contribute to the significant performance drop. The 160-bit bus, while efficient, offers less bandwidth than wider-memory GPUs, which can hinder performance in memory-heavy scenarios like high-resolution multiplayer sessions.

Benchmark data places the Arc B570 in the 65th percentile of all GPUs, with an average benchmark score of 20556. Its nearest rivals include the NVIDIA GeForce RTX 3070 Mobile (0.1% higher) and the Intel Arc A750 (0.1% lower), indicating that this card sits in a competitive mid-range tier. In Fivem, the GPU's role is evident in the settings scaling: at 1080p Ultra, the average FPS is 67, which drops to 44 at 1440p Ultra and 24 at 4K Ultra. This progression shows that the card's compute resources — 11.52 TFLOPS FP32 and 200.0 GPixel/s pixel rate — are simply not enough to maintain high frame rates at 4K with maximum settings.

The GPU's thermal and power design, with a 150 W TDP and dual-slot cooler, suggests it is a capable air-cooled solution, but the data indicates that users should temper expectations for 4K gaming. The passmark G3D score of 14195 and 3DMark Steel Nomad score of 2649 support the notion that this is a solid 1080p and entry-level 1440p card, not a 4K powerhouse.

CPU Role

The AMD Ryzen 5 8400F is a Zen 4 part based on the Phoenix architecture, manufactured on TSMC's 4 nm process. It has 6 cores and 12 threads, with a base clock of 4.20 GHz and a boost clock of 4.70 GHz. The CPU supports DDR5 memory in a dual-channel configuration, offering 83.2 GB/s of bandwidth. Its cache hierarchy includes 64 KB L1 per core, 1 MB L2 per core, and 16 MB of shared L3.

In Fivem, the CPU's role is to handle game logic, physics, and the complex scripting that multiplayer servers often run. The 6-core, 12-thread setup is adequate for this workload, as evidenced by the frame rates scaling primarily with GPU settings rather than CPU limitation. At 1080p Low, the system reaches 136 FPS, which is a strong indicator that the CPU can feed the GPU sufficiently at lower resolutions where the GPU has more headroom.

Benchmark scores for the 8400F show a 3DMark single-thread score of 951 and a multi-thread score of 6165, placing it in the 77th percentile of all CPUs. Its nearest rival, the AMD Ryzen 5 7500F, is only 0.2% faster in average score, and the Intel Core i7-13620H is 0.4% faster, suggesting the 8400F is well-positioned among mid-range processors. The Cinebench R23 multi-core score of 20851 and single-core score of 2943 further indicate that the CPU has solid performance for gaming, where single-thread speed often matters most.

The CPU's 65 W TDP and 4 nm process node contribute to efficient operation, but in Fivem, the bottleneck is clearly the GPU. The fact that 4K Ultra drops to 24 FPS while 1080p Low hits 136 FPS suggests that the CPU is not the limiting factor; if it were, the frame rates would be more consistent across resolutions. The data shows a classic GPU-bound scenario, where the CPU has enough headroom to push 136 FPS at 1080p but the GPU cannot maintain that pace as resolution increases.

How This Combo Ranks

In the database of tested combinations for Fivem, the AMD Ryzen 5 8400F and Intel Arc B570 pairing ranks 2396 out of 3005 combos, placing it in the lower 20th percentile of all tested systems. This rank reflects the GPU's mid-range positioning and the game's demanding nature at higher resolutions. While the CPU is a strong performer, the overall combo is held back by the GPU's inability to maintain high frame rates at 4K.

The rank suggests that many other CPU-GPU pairings deliver better Fivem performance. However, the combo's performance at 1080p is respectable, with an average of 107 FPS at Medium settings, which is well above playable thresholds. The ranking is likely dragged down by the 4K results, where the average FPS across all settings is just 36 (averaging the four 4K averages: 50, 39, 31, 24), which is below the 60 FPS target that many gamers seek.

Compared to the GPU's standalone percentile of 65 and the CPU's percentile of 77, the combo rank of 2396/3005 (roughly 20th percentile) indicates that this pairing is less effective in Fivem specifically than the components might suggest in isolation. This could be due to the game's engine favoring certain NVIDIA or AMD features, or simply the GPU's 10 GB VRAM and 160-bit bus being insufficient for the game's 4K demands. The data indicates that users should consider this combo primarily for 1080p or 1440p gaming, where it performs much better relative to the field.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. Low settings produce an average of 136 FPS, Medium hits 107 FPS with a minimum of 91 and maximum of 123 FPS, High reaches 86 FPS, and Ultra drops to 67 FPS. These numbers show that 1080p is the sweet spot for this pairing, with even Ultra settings maintaining a playable frame rate.

Moving to 2560x1440, the averages fall significantly. Low settings yield 89 FPS, Medium provides 71 FPS (with a range of 60 to 81 FPS), High achieves 56 FPS, and Ultra dips to 44 FPS. The Medium preset at 1440p is still smooth, but Ultra starts to feel less fluid, with frame rates approaching the 40 FPS range.

At 3840x2160, the performance becomes marginal. Low settings average 50 FPS, Medium averages 39 FPS (minimum 33, maximum 45), High averages 31 FPS, and Ultra averages just 24 FPS. The data shows that 4K gaming with this combo is only viable at Low settings, and even then, the frame rate is below the 60 FPS ideal. The gap between Low and Ultra at 4K is 26 FPS, which is a 52% reduction, highlighting how quickly the GPU saturates as settings increase.

FAQ

Q: What is the best resolution for this combo in Fivem?

A: The data shows 1920x1080 is the most effective resolution. At Medium settings, the average is 107 FPS, and even Ultra maintains 67 FPS. At 1440p, only Medium (71 FPS) and Low (89 FPS) stay above 60 FPS, while 4K only exceeds 30 FPS at Low settings.

Q: How does the Intel Arc B570 compare to its nearest rivals?

A: The Arc B570's average benchmark score is 20556, which is 0.1% lower than the Intel Arc A750 and 0.1% higher than the NVIDIA GeForce RTX 3070 Mobile. This places it in the 65th percentile of all GPUs, indicating solid mid-range performance.

Q: Is the AMD Ryzen 5 8400F a bottleneck for the Arc B570 in Fivem?

A: No, the data indicates the CPU is not the limiting factor. At 1080p Low, the combo achieves 136 FPS, which shows the CPU can push high frame rates. The performance drop at higher resolutions aligns with GPU load, suggesting the Arc B570 is the bottleneck.

Q: What is the CPU's percentile ranking compared to other processors?

A: The Ryzen 5 8400F is in the 77th percentile of all CPUs, with an average benchmark score of 25005. Its nearest rival, the AMD Ryzen 5 7500F, is only 0.2% faster, and the Intel Core i7-13620H is 0.4% faster.

Q: How does the combo rank in Fivem specifically?

A: The combo ranks 2396 out of 3005 tested combinations, placing it in the lower 20th percentile. This rank is lower than the individual component percentiles, indicating the GPU's limitations at higher resolutions affect the overall gaming experience in Fivem.

Q: What is the minimum FPS recorded across all tests?

A: The only minimum FPS values recorded are for the Medium settings. At 3840x2160, the minimum is 33 FPS, and at 2560x1440, it is 60 FPS, and at 1920x1080, it is 91 FPS. These represent the lowest frame rates during those specific test runs.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the user's resolution target and performance preference. For 1080p gaming, the Medium preset provides an excellent balance, with an average of 107 FPS and a minimum of 91 FPS, ensuring smooth gameplay even in demanding scenes. High settings at 86 FPS are also viable, but Ultra drops to 67 FPS, which may cause occasional stutter in heavy multiplayer moments.

At 1440p, the Medium preset is the best choice, delivering 71 FPS with a minimum of 60 FPS. This combination offers a solid experience without sacrificing too much visual quality. Low settings at 89 FPS are smoother but cost visual fidelity, while High (56 FPS) and Ultra (44 FPS) fall below the 60 FPS threshold and may feel less responsive.

For 4K, the data strongly recommends Low settings, which yield 50 FPS. Medium (39 FPS), High (31 FPS), and Ultra (24 FPS) are all below 40 FPS, making them unsuitable for fast-paced Fivem gameplay. Users who prioritize visual quality over frame rate could experiment with Medium, but the Low preset is the only one that approaches playability. Overall, the sweet spot for this combo is 1080p Medium or 1440p Medium, where the frame rates are high enough to handle the dynamic multiplayer environment.