Fivem

The AMD Ryzen 5 5600 and NVIDIA GeForce RTX 3080 Ti pairing delivers a broad performance envelope in Fivem, scaling from high-refresh 1080p play to playable 4K. The data shows a system where the GPU’s substantial memory bandwidth and compute resources are frequently the decisive factor, though the CPU’s six Zen 3 cores provide a sturdy foundation for the multiplayer title’s simulation load.

Resolution Scaling

The measured FPS figures reveal a classic resolution curve, with the most dramatic performance shifts occurring between 1080p and 1440p, followed by a more moderate step to 4K. At High settings, the average frame rate drops from 163 FPS at 1920x1080 to 108 FPS at 2560x1440, a reduction of 55 FPS. Moving to 3840x2160, the average falls further to 60 FPS, a 48 FPS decline from 1440p. This pattern indicates that while the RTX 3080 Ti is capable of driving high frame rates at lower resolutions, the GPU’s rendering workload at 4K becomes the primary constraint, limiting performance to roughly a third of the 1080p result.

The scaling under Low settings is even more revealing. At 1080p Low, the combo achieves 259 FPS, which drops to 171 FPS at 1440p and then to 95 FPS at 4K. The percentage drop from 1080p to 1440p is approximately 34%, while the drop from 1440p to 4K is about 44%. This steeper decline at higher resolutions suggests that the GPU is hitting a performance wall as pixel count increases, with the 4K Low result of 95 FPS still being respectable but far from the frame rates seen at lower resolutions. The data indicates that at 1080p, the CPU is likely a more significant contributor to the final frame rate, as the GPU has ample headroom.

For Medium settings, the measured averages of 204 FPS at 1080p, 135 FPS at 1440p, and 75 FPS at 4K show a consistent reduction, with the 4K result being only 37% of the 1080p figure. The Ultra preset tells a similar story, with 127 FPS at 1080p, 84 FPS at 1440p, and 46 FPS at 4K. The gap between 1080p and 1440p Ultra is 43 FPS, while the gap between 1440p and 4K is 38 FPS, indicating that the rendering cost of 4K Ultra is severe, halving the 1440p average. These results collectively suggest that Fivem at 4K is heavily GPU-bound, while 1080p performance is more balanced, with the CPU’s single-threaded capabilities likely playing a larger role in maintaining high frame rates.

GPU Role

The RTX 3080 Ti is the dominant component in this pairing, and its specifications directly explain the observed scaling. With 12 GB of GDDR6X memory on a 384-bit bus, the card offers 912.4 GB/s of bandwidth, which is critical for feeding the high-resolution textures and geometry typical of Fivem’s multiplayer environments. The memory runs at 1188 MHz, translating to 19 Gbps effective, and this bandwidth is a key reason why the card can still deliver 60 FPS at 4K High settings. The GPU’s boost clock of 1665 MHz, on a base of 1365 MHz, allows it to maintain performance headroom during extended sessions, though the 350 W TDP indicates the power envelope required to sustain these clocks.

The GPU’s compute resources are substantial: 10,240 shading units, 320 TMUs, and 112 ROPs. This configuration enables a pixel rate of 186.5 GPixel/s and a texture rate of 532.8 GTexel/s, which are the raw throughput numbers that determine fill-rate-bound performance. In Fivem, where draw calls and object density can vary wildly in multiplayer, these figures help explain why the card performs admirably at 1440p, maintaining 108 FPS on High. The 34.10 TFLOPS of FP32 compute is also relevant, as it supports the physics and particle effects that can tax the GPU in busy areas.

The benchmark scores for the GPU reinforce its position. A Passmark G3D score of 26896 places it in the 83rd percentile of all GPUs, with an average benchmark score of 41187. Its nearest rivals in the database include the AMD Radeon Pro 5300, which scores 40870, and the NVIDIA GeForce RTX 5070, which scores 40377; the RTX 3080 Ti is 2% ahead of the latter)Skip. The 3DMark Steel Nomad DX12 score of 5077 further indicates strong DirectX 12 performance, which is relevant for Fivem’s rendering pipeline. The data shows that the GPU’s 12 GB of VRAM is sufficient for the tested settings, as no min FPS data was recorded for most presets, implying consistent frame delivery rather than stutter from memory overflow.

How This Combo Ranks

Within the benchmark database, this specific combination of the AMD Ryzen 5 5600 and NVIDIA GeForce RTX 3080 Ti holds a rank of 930 out of 3707 tested combos in Fivem. This places the pairing in the top 25% of all combinations, a strong result that reflects the balance between the CPU and GPU. The rank suggests that while there are faster configurations available, this combo outperforms the majority of systems tested, making it a viable high-performance option for the game.

The CPU’s own ranking supports this assessment. The Ryzen 5 5600 sits in the 74th percentile of all CPUs, with an average benchmark score of 20468. Its nearest rivals include the Intel Core Ultra 7 258V, which scores 20454 (0.1% lower), and the AMD Ryzen 5 8500G, scoring 20425 (0.2% lower). The CPU’s performance is closely matched to these parts, indicating that it is not a bottleneck in most scenarios. The GPU, however, is in the 83rd percentile, which is higher than the CPU’s 74th percentile, suggesting that the graphics card is the more capable component in this pairing.

The combo rank of 930/3707 is a holistic metric that accounts for the interaction between the two parts. Given that the GPU is a high-end model and the CPU is a mid-range part, the rank indicates that the system is well-optimized for Fivem, with neither component severely limiting the other. The data implies that users could achieve higher ranks by pairing the RTX 3080 Ti with a more powerful CPU, but the current setup offers a solid balance for the game’s demands.

Measured FPS Breakdown

The raw measured FPS data provides a complete picture of performance across resolutions and settings.

At 1920x1080, the combo is exceptionally fast. Low settings yield an average of 259 FPS, which is the highest recorded figure in the entire dataset. Medium settings reduce this to 204 FPS, with a minimum of 174 FPS and a maximum of 235 FPS, showing good frame consistency. High settings deliver 163 FPS, and Ultra settings still manage 127 FPS. These numbers indicate that at 1080p, the system is capable of driving high-refresh-rate monitors, with even Ultra settings exceeding 120 FPS.

Moving to 2560x1440, performance remains strong but shows the expected decline. Low settings produce 171 FPS, while Medium settings average 135 FPS, with a min/max of 114/155 FPS. High settings drop to 108 FPS, and Ultra settings fall to 84 FPS. The 1440p results show that the system can handle High settings comfortably above 100 FPS, making it suitable for 144Hz displays in most scenarios, though Ultra settings will require a VRR display to avoid tearing.

At 3840x2160, the GPU’s limits become apparent. Low settings still deliver a playable 95 FPS, and Medium settings average 75 FPS, with a min/max of 63/86 FPS. High settings drop to exactly 60 FPS, which is the threshold for standard 60Hz displays. Ultra settings, however, fall to 46 FPS, which is below the ideal for smooth gameplay. The 4K data shows that the combo is best suited for High settings or below at this resolution, with Ultra being reserved for less demanding scenes. The Medium preset’s min FPS of 63 indicates that even in heavier moments, the system stays above 60 FPS, providing a stable experience.

FAQ

Q: What is the highest average FPS recorded for this combo in Fivem?

A: The highest average FPS is 259, achieved at 1920x1080 resolution with Low settings.

Q: Can this system handle 4K gaming in Fivem?

A: Yes, the data shows playable frame rates at 4K, with High settings averaging 60 FPS and Medium settings averaging 75 FPSanding.

Q: How does the RTX 3080 Ti compare to its nearest rival, the RTX 5070?

A: The RTX 3080 Ti has an average benchmark score of 41187, which is 2% higher than the RTX 5070’s score of 40377.

Q: What is the minimum FPS recorded at 1440p Medium settings?

A: The minimum FPS at 2560x1440 with Medium settings is 114 FPS, with a maximum of 155 FPS and an average of 135 FPS.

Q: Does the CPU bottleneck the GPU at 1080p?

A: The data suggests partial CPU limitation at 1080p, as the GPU has more headroom at lower resolutions; the CPU’s average benchmark score of 20468 places it in the 74th percentile, while the GPU is in the 83rd percentile.

Q: What is the combo’s overall rank in the database for Fivem?

A: The AMD Ryzen 5 5600 and NVIDIA GeForce RTX 3080 Ti combo ranks 930th out of 3707 tested combinations in Fivem.

CPU Role

The AMD Ryzen 5 5600 provides the processing foundation for this pairing, and its specifications are well-matched to the GPU’s capabilities. With 6 cores and 12 threads based on the Zen 3 architecture, the CPU operates at a base clock of 3.50 GHz and boosts up to 4.40 GHz. This single-threaded performance is crucial for Fivem, which is a multiplayer mod that often relies on a few heavily loaded threads for game logic and networking. The CPU’s 32 MB of shared L3 cache helps reduce memory latency, which is beneficial for maintaining consistent frame times.

The CPU’s benchmark results show a strong balance between single-threaded and multi-threaded performance. In Cinebench R23, it scores 2584 in single-core and 18309 in multi-core. The 3DMark tests further illustrate this, with a single-thread score of 882 and a 16-thread score of 5641. These numbers indicate that the CPU can handle the demands of Fivem’s simulation, but they also show that its multi-threaded performance is modest compared to higher-core-count parts. This is reflected in the 1080p Low result of 259 FPS, which is likely near the CPU’s limit; the GPU could potentially render more frames, but the CPU’s thread scheduling becomes a bottleneck at such high frame rates.

At 4K, the CPU’s role diminishes, as the GPU’s rendering workload becomes the limiting factor. The 60 FPS average at 4K High is more than double the 1080p Low result, showing that the GPU is fully utilized at this resolution. The CPU’s 65 W TDP and 7 nm process node contribute to efficient operation, but the data shows that its performance is not the primary driver of FPS at higher resolutions. The Ryzen 5 5600’s release in 2022 and its compatibility with DDR4 memory and the AM4 socket make it a sensible pairing with the RTX 3080 Ti, as both are mature products with well-established drivers. The CPU’s average benchmark score of 20468 places it just 0.1% ahead of the Intel Core Ultra 7 258V, indicating that it is a competitive mid-range processor that supports the GPU without causing significant frame drops in most scenarios.