Fivem

Fivem

AVERAGE FPS
79
good

This combination provides smooth gameplay with an average of 79 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 31 36 46 59
1440p QHD 52 67 85 106
1080p Full HD 79 98 127 157

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 59
3840x2160 Medium 46
3840x2160 High 36
3840x2160 Ultra 31
2560x1440 Low 106
2560x1440 Medium 85
2560x1440 High 67
2560x1440 Ultra 52
1920x1080 Low 157
1920x1080 Medium 127
1920x1080 High 98
1920x1080 Ultra 79

Fivem with AMD Ryzen 5 5600 + NVIDIA GeForce RTX 2060 SUPER, In-Depth Analysis

The AMD Ryzen 5 5600 and NVIDIA GeForce RTX 2060 SUPER combination delivers a playable, though not exceptional, experience in Fivem. Benchmark data shows the pairing is best suited for high-refresh-rate 1080p gameplay, with performance degrading predictably as resolution increases. The measured results place this combo at rank 1229 out of 1792 tested configurations, indicating that while it holds its own, it sits in the lower-middle tier of system pairings for this title.

Resolution Scaling

The performance trajectory from 1080p to 4K reveals a system that becomes progressively GPU-bound at higher resolutions, though the CPU still exerts notable influence at lower settings. At 1080p with Low settings, the combo achieves 156.8 FPS, which drops to 97.9 FPS at High and 78.7 FPS at Ultra. This represents a 49.8% reduction from Low to Ultra at 1080p, a substantial gap that indicates the graphics card is already beginning to limit frame rates even at the lowest resolution tested.

Moving to 1440p, the scaling pattern shifts. Low settings yield 105.9 FPS, High produces 67.2 FPS, and Ultra falls to 52.2 FPS. The drop from Low to Ultra at 1440p is 50.7%, nearly identical in percentage terms to the 1080p delta. However, the absolute frame rates are significantly lower, confirming that pixel count is the dominant factor. The transition from 1080p Low to 1440p Low costs 50.9 FPS, a 32.5% reduction, while the same resolution jump at Ultra costs 26.5 FPS, a 33.7% reduction. This consistency across settings suggests the GPU's rendering pipeline, rather than memory bandwidth or CPU overhead, is the primary constraint.

At 4K, the system struggles to maintain fluid motion. Ultra settings produce just 31 FPS, while High reaches 35.8 FPS. Medium improves to 46.2 FPS, and Low achieves 59.2 FPS. The 4K Low result is notable—it nearly doubles the Ultra frame rate, showing that the RTX 2060 SUPER's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth are adequate for the data load, but the shading throughput becomes the bottleneck. The difference between 1440p Ultra at 52.2 FPS and 4K Ultra at 31 FPS is a 40.6% drop, which aligns closely with the raw pixel increase. This behavior indicates a well-balanced system where neither component creates a severe imbalance; rather, the GPU's compute capacity defines the ceiling.

The data shows that this combo is optimized for 1080p and playable at 1440p with settings adjustments. At 4K, only Low settings approach acceptable frame rates, and even then, the 59.2 FPS result is marginal for competitive multiplayer scenarios. The scaling curve suggests that users targeting 4K would need to significantly reduce visual quality, while those prioritizing frame rates should stay at 1080p.

CPU Role

The AMD Ryzen 5 5600 provides six cores and twelve threads based on the Zen 3 architecture, with a base clock of 3.50 GHz and a boost clock of 4.40 GHz. In Fivem, a multiplayer title that often stresses single-thread performance due to server-side scripting and player interactions, this CPU's capabilities are relevant. The 3DMark single-thread score of 882 and the Cinebench R23 single-core score of 2584 indicate strong per-core performance. The passmark single-thread score of 3256 further corroborates this, placing the 5600 above many older desktop processors.

The multi-threaded results show the CPU's aggregate capability. The Cinebench R23 multi-core score of 18309 and passmark multithread score of 21541 demonstrate that the 5600 can handle heavy workloads when needed. However, in Fivem, the impact of these multi-core scores is less pronounced. Comparing the 1080p Low result of 156.8 FPS to the 4K Low result of 59.2 FPS, the frame rate drops by 62.2% despite identical CPU settings. This indicates that at lower resolutions, the CPU is capable of feeding the GPU adequately, but the GPU becomes the limiting factor as resolution climbs.

The CPU's 32 MB of shared L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth provide sufficient data throughput for the game's world streaming. The 3DMark 8-thread score of 4798 and 16-thread score of 5641 show that the CPU scales reasonably with thread count, but the incremental gain from 8 to 16 threads is only 17.6%, suggesting diminishing returns for Fivem's workload. The percentile rank of 79 among all CPUs indicates this processor outperforms the majority of installed hardware, yet in this specific combo, the GPU often dictates the final frame rate.

At 1080p Ultra, the system produces 78.7 FPS, which is 49.8% lower than the Low setting result. This gap is primarily attributable to the GPU's rendering load, but the CPU's single-thread performance ensures that the frame rate does not collapse entirely. The 3DMark 2-thread score of 1737 and 4-thread score of 3313 show that the CPU can handle the lighter thread counts typical of game logic, allowing the GPU to work without starvation. In summary, the Ryzen 5 5600 provides ample compute headroom for Fivem, but it does not compensate for the GPU's limitations at higher resolutions.

GPU Role

The NVIDIA GeForce RTX 2060 SUPER is the decisive component in this combo's performance profile. With 8 GB of GDDR6 memory on a 256-bit bus, the memory bandwidth of 448.0 GB/s is sufficient for the game's textures at 1080p and 1440p, but becomes a constraint at 4K Ultra. The card's base clock of 1470 MHz and boost clock of 1650 MHz, combined with 2176 shading units, deliver a raw FP32 performance of 7.181 TFLOPS. This compute throughput directly correlates with the frame rate scaling observed across resolutions.

The 3DMark Steel Nomad DX12 score of 2011 places the GPU in the 63rd percentile of all graphics cards, indicating mid-range positioning. The passmark G3D score of 16462 and G2D score of 854 further characterize its capabilities. The nearest rivals include the RTX 2070 with a score of 19680 (a 0.5% delta) and the GTX TITAN at 19706 (a 0.3% delta), showing that the 2060 SUPER performs nearly identically to its higher-tier sibling in synthetic tests. However, in Fivem, the measured FPS data reveals the practical implications.

At 1080p Low, the GPU produces 156.8 FPS, which is high enough to saturate most 144 Hz monitors. At 1080p Medium, the frame rate drops to 126.7 FPS, and at High, it reaches 97.9 FPS. These results show that the GPU's 7.181 TFLOPS are sufficient for smooth gameplay at 1080p with modest settings. The RTX 2060 SUPER's 34 RT cores and 272 tensor cores do not directly benefit Fivem, as the game does not utilize ray tracing, but they do not hinder performance either.

The GPU's memory subsystem plays a critical role at 4K. The 8 GB capacity is adequate for the game's assets at 4K Low, yielding 59.2 FPS, but at 4K Ultra, the frame rate drops to 31 FPS. This 47.6% reduction from Low to Ultra at 4K is steeper than the 50.7% reduction at 1440p, suggesting that the memory bandwidth becomes a bottleneck as texture quality increases. The 448.0 GB/s bandwidth is identical across all settings, so the increased data demands at Ultra settings exceed what the memory controller can efficiently feed to the shading units. The GPU's 64 ROPs and 136 TMUs also influence pixel fill rate, with a pixel rate of 105.6 GPixel/s and texture rate of 224.4 GTexel/s, which are modest figures for 4K rendering.

FAQ

Q: What is the best resolution for this combo in Fivem?

A: The data shows 1080p is the optimal resolution, with High settings delivering 97.9 FPS and Low reaching 156.8 FPS. At 1440p, High drops to 67.2 FPS, which is still playable, but 4K is only viable at Low settings with 59.2 FPS.

Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?

A: The Ryzen 5 5600 has an average benchmark score of 21765, placing it 0.6% above the Intel Xeon D-1746TER (21635) and 0.6% below the AMD EPYC 9554P (21899). It trails the Intel Core i7-11700F by 0.9%.

Q: Is the RTX 2060 SUPER's memory bandwidth sufficient for Fivem?

A: The 448.0 GB/s bandwidth supports smooth performance at 1080p and 1440p, but at 4K Ultra, the frame rate drops to 31 FPS, indicating the memory subsystem is strained by high-resolution textures.

Q: What frame rate can be expected at 1440p with Ultra settings?

A: The measured average FPS at 1440p Ultra is 52.2 FPS, which is playable but below the 60 FPS threshold many players prefer for a multiplayer title.

Q: How does this combo rank against all tested configurations?

A: This combo ranks 1229 out of 1792 tested combinations, placing it in the lower 31.4% of all system pairings for Fivem.

Q: Does the CPU boost clock of 4.40 GHz impact frame rates?

A: The boost clock contributes to strong single-thread performance, evidenced by the 3DMark single-thread score of 882, which helps maintain frame rates at 1080p Low where the GPU is not the primary bottleneck.

How This Combo Ranks

The comboRankInGame of 1229 out of 1792 places this system in the 68.6th percentile, meaning it outperforms roughly 31% of tested configurations but is bested by the majority. This ranking reflects the combination's balanced but modest hardware. The Ryzen 5 5600's percentile of 79 among all CPUs suggests the processor is above average, while the RTX 2060 SUPER's percentile of 63 indicates the GPU is closer to the middle of the pack. The discrepancy between CPU and GPU percentiles explains why the combo does not rank higher—the GPU is the limiting factor.

Comparing the combo's measured FPS to its component benchmarks, the system performs as expected. At 1080p High, the 97.9 FPS result is consistent with the GPU's passmark G3D score of 16462, which is 0.3% above the GTX TITAN's score. The combo's rank is also influenced by the game's CPU demands, as the 5600's 3DMark 16-thread score of 5641 is 0.6% above the Xeon D-1746TER, but this advantage does not translate into higher frame rates at resolutions where the GPU is stressed.

For users seeking a better rank, the data suggests that upgrading the GPU would yield more significant gains than upgrading the CPU, given that the 5600 already ranks in the 79th percentile. The combo's position at 1229 also indicates that many other pairings, likely with newer GPUs, offer higher FPS in Fivem. The measured data confirms that this is a competent 1080p gaming system, but its performance ceiling is defined by the RTX 2060 SUPER's mid-range compute and memory capabilities.

Hardware Specifications

AMD Ryzen 5 5600

Cores / Threads 6 / 12
Base Clock 3500 MHz
Boost Clock 4400 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 2060 SUPER

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 1650 MHz MHz
TDP 175 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5600 + NVIDIA GeForce RTX 2060 SUPER in Fivem

Resolution Settings Avg FPS
3840x2160 Low 59.2
3840x2160 Medium 46.2
3840x2160 High 35.8
3840x2160 Ultra 31.0
2560x1440 Low 105.9
2560x1440 Medium 85.1
2560x1440 High 67.2
2560x1440 Ultra 52.2
1920x1080 Low 156.8
1920x1080 Medium 126.7
1920x1080 High 97.9
1920x1080 Ultra 78.7

Fivem with Ryzen 5 5600 + Other GPUs

See how Fivem performs with the same CPU but different graphics cards.

Fivem with RTX 2060 SUPER + Other CPUs

See how Fivem performs with the same GPU but different processors.

Other Games with Ryzen 5 5600 + RTX 2060 SUPER

Explore FPS benchmarks for other games using this same hardware combination.