Fivem

Resolution Scaling

The measured FPS data reveals a classic GPU-bound scaling pattern as resolution increases. At 1080p with Low settings, the combo delivers 267.1 FPS, which drops to 187.3 FPS at 1440p and further to 99.7 FPS at 4K. This represents a 29.9% drop from 1080p to 1440p and a 46.8% drop from 1440p to 4K. The scaling is steep, indicating that the NVIDIA GeForce RTX 5070 is the primary limiter as pixel count rises.

The picture changes when looking at Ultra settings. At 1080p Ultra, the system produces 139.8 FPS; at 1440p Ultra, it falls to 88.5 FPS (a 36.7% reduction); and at 4K Ultra, it bottoms out at 51.1 FPS (a 42.3% reduction from 1440p). The consistent percentage drops across settings suggest that the rendering load scales predictably with resolution, and the GPU's 12 GB GDDR7 memory and 672.0 GB/s bandwidth are being taxed heavily at higher resolutions.

Notably, the gap between Low and Ultra settings widens as resolution decreases. At 4K, Low yields 99.7 FPS while Ultra yields 51.1 FPS — a 48.7 FPS difference. At 1080p, the same settings gap is 127.3 FPS (267.1 vs 139.8). This behavior indicates that at 4K, the GPU's compute and memory throughput become the bottleneck, compressing the performance headroom available for higher settings. The 64.9 FPS High result at 4K sits close to the 60 FPS threshold, while Medium at 79.7 FPS offers more comfortable headroom.

How This Combo Ranks

This combination of AMD Ryzen 5 5500 and NVIDIA GeForce RTX 5070 ranks 390th out of 1,792 tested combos in Fivem, placing it in the top 21.8% of all configurations. That ranking is respectable but not elite, reflecting the fact that Fivem is a multiplayer title where CPU thread management and GPU rasterization both play significant roles.

The CPU's benchmark percentile of 79 versus all processors indicates it outperforms roughly four-fifths of the tested CPU field. Its nearest rival, the Intel Core i5-12500, scores 20,897 in average benchmark tests against the Ryzen's 20,875 — a negligible 0.1% difference. This places the Ryzen 5 5500 in a tightly contested performance tier where single-digit percentage differences separate competitors.

For the GPU, the RTX 5070 sits at the 83rd percentile among all graphics cards. Its average benchmark score of 41,687 places it just ahead of the NVIDIA GeForce RTX 3090, which scores 41,441 (a 0.6% gap in favor of the 5070), and slightly behind the NVIDIA Tesla M40 at 41,897 (a 0.5% deficit). The GPU's 3DMark Steel Nomad DX12 score of 5,077 and PassMark G3D score of 29,137 further contextualize its mid-to-high tier positioning.

The combo's rank of 390 out of 1,792 suggests that while each component individually performs above average, the pairing does not reach the top echelon. This is consistent with the CPU's modest multi-threaded performance — its PassMark multithread score of 19,330 and Cinebench R23 multicore score of 16,429 indicate a capable but not class-leading processor.

CPU Role

The AMD Ryzen 5 5500 brings 6 cores and 12 threads based on the Zen 3 architecture, with a base clock of 3.60 GHz and boost clock of 4.20 GHz. These specifications matter for Fivem because the game's multiplayer nature involves physics simulation, network processing, and AI logic that can spread across multiple threads.

Synthetic benchmarks show the CPU's scaling characteristics. The 3DMark 16-thread score of 5,386 is only marginally higher than the 8-thread score of 4,593, and the max-thread score of 5,411 demonstrates that the extra threads beyond 8 provide diminishing returns. This pattern suggests that Fivem's workload likely saturates around 8 threads, making the 12-thread capability useful for background tasks but not critical for peak gaming performance.

Single-thread performance is where the CPU shows its limits. The 3DMark single-thread score of 836 and Cinebench R23 single-core score of 2,319 are modest figures. In a game like Fivem, where frame pacing often depends on the main simulation thread, this could explain why the combo doesn't achieve higher rankings despite the strong GPU. The PassMark single-thread score of 3,058 reinforces this assessment.

The CPU's 16 MB L3 cache and 51.2 GB/s memory bandwidth are adequate for gaming, but they don't provide the headroom seen in higher-tier processors. The 65 W TDP indicates efficient operation, and the CPU sits in the 79th percentile overall, meaning it outperforms most processors in general benchmarks. However, in Fivem specifically, the combo rank of 390 suggests that the CPU's single-thread capabilities may be holding back the RTX 5070 at lower resolutions where frame rates exceed 200 FPS.

FAQ

Q: What is the best resolution for this combo in Fivem?

A: The data shows 1440p High delivers 118.4 FPS, which balances visual quality with smooth gameplay. At 4K, even Medium settings only reach 79.7 FPS, while 1080p Ultra produces 139.8 FPS.

Q: How does the RTX 5070 compare to the RTX 3090 in this setup?

A: The RTX 5070 has an average benchmark score of 41,687, which is 0.6% higher than the RTX 3090's 41,441. In Fivem, this places the 5070 slightly ahead of its predecessor in raw compute capability.

Q: Is the Ryzen 5 5500 a bottleneck for the RTX 5070?

A: The CPU's single-thread score of 836 (3DMark) and the fact that 1080p Low reaches 267.1 FPS while 4K Ultra drops to 51.1 FPS suggest the GPU becomes the limiting factor at higher resolutions, but the CPU may constrain maximum frame rates at 1080p.

Q: What settings should be used for 4K gameplay?

A: Medium settings at 4K yield 79.7 FPS, which is the highest frame rate above 60 FPS in the 4K measurements. High drops to 64.9 FPS, and Ultra falls below playable at 51.1 FPS.

Q: How does the CPU's multi-threaded performance affect Fivem?

A: The Cinebench R23 multicore score of 16,429 and PassMark multithread score of 19,330 indicate strong multi-threaded capability. The 3DMark scores show scaling that flattens beyond 8 threads, suggesting Fivem benefits from up to 8 threads but not the full 12.

Q: What is the launch MSRP of the components?

A: The CPU has a launch MSRP of $159, and the GPU has a launch MSRP of 549 USD.

GPU Role

The NVIDIA GeForce RTX 5070 is built on the Blackwell 2.0 architecture with 6,144 shading units, 192 texture mapping units, and 80 raster operation pipelines. Its 12 GB of GDDR7 memory on a 192-bit bus provides 672.0 GB/s of bandwidth, which is substantial for 1080p and 1440p gaming but becomes stressed at 4K Ultra.

The GPU's clock behavior — 2,325 MHz base and 2,512 MHz boost — combined with its 30.87 TFLOPS FP32 compute, explains the strong frame rates at lower resolutions. At 1080p Low, the combo achieves 267.1 FPS, and even at 1080p Ultra it maintains 139.8 FPS. These numbers indicate the GPU is rarely the bottleneck at 1080p, allowing the CPU to push frame rates toward its limits.

The 4K results tell a different story. The GPU's 201.0 GPixel/s pixel rate and 482.3 GTexel/s texture rate are insufficient to maintain high frame rates at 3840x2160 with demanding settings. The 4K Ultra result of 51.1 FPS represents a 63.4% drop from the 1080p Ultra figure of 139.8 FPS. This performance cliff aligns with the GPU's 83rd percentile ranking — it's a strong mid-to-high tier card, but not a flagship 4K solution.

The GPU's PassMark G3D score of 29,137 and Geekbench OpenCL score of 185,269 position it well above average. Its nearest rivals in benchmark scores include the AMD Radeon Pro 5300 (0.2% lower) and NVIDIA GeForce RTX 3090 (0.6% lower). The 12 GB VRAM capacity is sufficient for Fivem's textures at all measured settings, as evidenced by the consistent frame rates within each resolution tier.

Settings Recommendations

For 1080p gaming, the data supports using Ultra settings, which deliver 139.8 FPS — well above the 60 FPS threshold and only 47.7% lower than Low settings' 267.1 FPS. The visual fidelity gain from Ultra is worth the frame rate trade-off at this resolution.

At 1440p, High settings at 118.4 FPS provide the best balance. Medium reaches 145.7 FPS but offers less visual polish, while Ultra drops to 88.5 FPS. The 29.9 FPS difference between High and Ultra (118.4 vs 88.5) represents a 25.3% performance penalty that may not justify the visual upgrade.

For 4K, Medium settings at 79.7 FPS are the recommended choice. This is the only 4K preset that maintains frame rates above 75 FPS. High at 64.9 FPS is playable but leaves less headroom for frame drops, and Ultra at 51.1 FPS falls below the ideal playability threshold. Low at 99.7 FPS sacrifices too much visual quality for the 20 FPS gain over Medium.

The overall pattern shows that Fivem scales predictably with settings at each resolution. The gap between Low and Ultra ranges from 48.6 FPS at 4K to 127.3 FPS at 1080p, indicating that the GPU has more headroom at lower resolutions to absorb the cost of higher settings.

Measured FPS Breakdown

At 1920x1080, the combo produces 267.1 FPS on Low, 223.5 FPS on Medium, 179.5 FPS on High, and 139.8 FPS on Ultra. The progression shows a 43.6 FPS drop from Low to Medium, a 44.0 FPS drop from Medium to High, and a 39.7 FPS drop from High to Ultra.

At 2560x1440, results are 187.3 FPS (Low), 145.7 FPS (Medium), 118.4 FPS (High), and 88.5 FPS (Ultra). The step-downs are 41.6 FPS from Low to Medium, 27.3 FPS from Medium to High, and 29.9 FPS from High to Ultra.

At 3840x2160, the figures are 99.7 FPS (Low), 79.7 FPS (Medium), 64.9 FPS (High), and 51.1 FPS (Ultra). The differences are 20.0 FPS from Low to Medium, 14.8 FPS from Medium to High, and 13.8 FPS from High to Ultra.

Resolution scaling across identical settings shows: Low settings drop 79.8 FPS from 1080p to 1440p and 87.6 FPS from 1440p to 4K; Medium drops 77.8 FPS and 66.0 FPS respectively; High drops 61.1 FPS and 53.5 FPS; Ultra drops 51.3 FPS and 37.4 FPS. The diminishing absolute drops at higher settings indicate that the GPU's workload becomes more compute-bound than memory-bound as settings increase, with the 12 GB GDDR7 buffer being sufficient across all tested configurations.