Fivem

The AMD Ryzen 5 4600G paired with the NVIDIA GeForce RTX 5050 produces a clear performance hierarchy in Fivem, with the Medium preset at 1920x1080 delivering the most balanced experience. At this resolution, the system achieves an average of 132 FPS with a minimum of 112 FPS and a maximum of 152 FPS. This combination of smooth averages and a narrow frame-time spread indicates a stable gameplay environment. The High preset at 1080p drops to an average of 106 FPS, which is still playable but sacrifices 26 FPS for visual fidelity gains that may not be worth the performance cost in a fast-paced multiplayer setting. The Ultra preset at 1080p falls further to 82 FPS, which is below the threshold where high-refresh-rate monitors can be fully utilized. Conversely, the Low preset at 1080p pushes the system to 168 FPS, but this setting likely removes too many environmental details that are crucial for spotting other players in Fivem’s open-world multiplayer scenarios. The Medium preset at 2560x1440 also warrants consideration, producing 87 FPS with a minimum of 74 FPS, which is a viable alternative for users prioritizing resolution over maximum frame rates. However, the 1080p Medium configuration stands as the optimal choice, offering the best compromise between fluidity, responsiveness, and visual clarity.

GPU Role

The NVIDIA GeForce RTX 5050 serves as the primary rendering engine for this configuration, and its memory subsystem plays a critical role in Fivem’s performance outcomes. The GPU comes equipped with 8 GB of GDDR6 memory on a 128-bit bus, providing a bandwidth of 320.0 GB/s. This memory configuration is sufficient for the game’s asset streaming demands at 1080p and 1440p, but the data suggests it becomes a limiting factor at higher resolutions. The GPU’s clock speeds are set at a base of 2317 MHz with a boost of 2572 MHz, and these frequencies directly influence the frame rates observed across all tested settings. The RTX 5050’s compute capabilities, measured at 13.17 TFLOPS FP32, provide the raw processing power needed to handle Fivem’s draw calls and shader workloads. The benchmark data shows that the GPU scales predictably with settings changes; at 1080p, moving from Low to Ultra reduces average FPS from 168 to 82, a decline of 51 percent. This scaling pattern indicates that the GPU is the dominant component at this resolution, as the CPU has sufficient headroom to feed it. The GPU’s performance percentile of 66 places it in the upper third of all tested graphics cards, and its average benchmark score of 21035 aligns closely with rivals such as the AMD Radeon RX 5600 XT, which scores 20713 with a delta of 1.6 percent. The RTX 5050’s 8 GB VRAM capacity is adequate for Fivem at Medium and High settings, but the frame rate collapse at 4K Ultra to 30 FPS suggests that memory bandwidth or capacity constraints emerge when texture quality and resolution demands increase simultaneously.

Resolution Scaling

The measured FPS data reveals a pronounced performance drop as resolution increases from 1920x1080 to 3840x2160, which highlights the GPU’s central role in this pairing. At Medium settings, the progression is 132 FPS at 1080p, 87 FPS at 1440p, and 48 FPS at 4K. This represents a 34 percent reduction from 1080p to 1440p, and a further 45 percent reduction from 1440p to 4K. The overall decline from 1080p to 4K at Medium settings is 64 percent, which is a substantial loss that indicates the rendering load grows faster than the GPU’s throughput can compensate. The High settings follow a similar trajectory: 106 FPS at 1080p, 70 FPS at 1440p, and 39 FPS at 4K. The Low settings demonstrate the same pattern but at higher absolute values: 168 FPS at 1080p, 110 FPS at 1440p, and 61 FPS at 4K. These results show that even at the lowest quality preset, 4K resolution drops the frame rate below the 60 FPS target that many players consider the minimum for smooth gameplay. The Ultra settings are the most demanding, yielding 82 FPS at 1080p, 54 FPS at 1440p, and 30 FPS at 4K. The scaling behavior across resolutions is consistent, with each doubling of pixel count producing approximately a 30-50 percent frame rate penalty. This pattern strongly suggests that the RTX 5050 is the limiting component in this configuration, as the CPU’s performance would not degrade linearly with resolution. The 4K results, particularly the 30 FPS average at Ultra, indicate that this resolution is only viable at Low settings, where the 61 FPS average provides a playable experience but sacrifices visual quality significantly.

How This Combo Ranks

The combined performance of the AMD Ryzen 5 4600G and NVIDIA GeForce RTX 5050 in Fivem places this configuration at rank 1813 out of 3005 tested combos, positioning it in the 60th percentile of all systems evaluated. This ranking reflects a mid-tier standing, which is consistent with the individual component benchmarks. The CPU’s percentile of 71 against all processors indicates it outperforms 71 percent of tested CPUs, while the GPU’s percentile of 66 shows it exceeds 66 percent of tested graphics cards. However, the combo’s rank in Fivem is slightly lower than either component’s individual percentile would suggest, which implies that the game’s specific workload characteristics do not perfectly align with the strengths of this pairing. The CPU’s nearest rivals include the AMD Ryzen 3 PRO 5355GE with an average score of 17482 and a delta of 0.1 percent, the AMD Ryzen 3 8300GE at 17614 with a delta of -0.6 percent, and the Intel Core 7 150U at 17395 with a delta of 0.6 percent. These comparisons show that the 4600G is well-matched against its direct competitors in synthetic benchmarks. The GPU’s nearest rivals present a more varied picture, with the AMD Radeon RX Vega M GL scoring 21153, the AMD Radeon HD 8970M scoring 21237, and the AMD Radeon RX 5600 XT scoring 20713. The RTX 5050’s average benchmark score of 21035 places it within a narrow band of these competitors, with deltas ranging from -1.6 percent to 1.6 percent. This ranking data suggests that while the individual components are capable, the combination does not boost to a top-tier gaming system in Fivem, likely due to the CPU’s older Zen 2 architecture limiting the GPU’s full potential in certain scenarios.

FAQ

Q: What is the best resolution and settings combination for this system?

A: The 1920x1080 Medium preset provides the most balanced experience, achieving an average of 132 FPS with a minimum of 112 FPS and a maximum of 152 FPS. This configuration offers smooth gameplay with adequate visual quality for Fivem’s multiplayer environment.

Q: Can this system handle 4K gaming in Fivem?

A: At 3840x2160 resolution, the system can achieve 61 FPS on Low settings, but performance drops to 48 FPS on Medium, 39 FPS on High, and 30 FPS on Ultra. For a consistently smooth 4K experience, Low settings are required, while higher presets will result in sub-60 FPS performance.

Q: How does the RTX 5050 compare to its closest competitors?

A: The RTX 5050 has an average benchmark score of 21035, placing it between the AMD Radeon RX 5600 XT at 20713 and the AMD Radeon RX Vega M GL at 21153. It trails the NVIDIA RTX A4000 Mobile, which scores 21379, by 1.6 percent.

Q: What is the CPU’s performance relative to other processors?

A: The AMD Ryzen 5 4600G achieves an average benchmark score of 17507, placing it in the 71st percentile of all CPUs. Its closest rival is the AMD Ryzen 3 PRO 5355GE with a score of 17482, showing a negligible 0.1 percent difference.

Q: Is the frame rate stable across different settings?

A: The data shows the narrowest frame-time variance at Medium settings, with a minimum of 112 FPS and maximum of 152 FPS at 1080p, and 74 to 100 FPS at 1440p. Other settings do not report minimum or maximum values, making Medium the only preset with documented stability metrics.

Q: What GPU memory specifications are relevant for this game?

A: The RTX 5050 features 8 GB of GDDR6 memory with a 128-bit bus and 320.0 GB/s bandwidth. This configuration is sufficient for 1080p and 1440p gaming but shows limitations at 4K resolutions, particularly at higher quality presets.

Measured FPS Breakdown

The complete measured performance data for this system in Fivem is as follows. At 1920x1080 resolution, the Low preset delivers an average of 168 FPS, the Medium preset delivers 132 FPS with a range of 112 to 152 FPS, the High preset delivers 106 FPS, and the Ultra preset delivers 82 FPS. Moving to 2560x1440, the Low preset achieves 110 FPS, the Medium preset achieves 87 FPS with a range of 74 to 100 FPS, the High preset achieves 70 FPS, and the Ultra preset achieves 54 FPS. At the maximum tested resolution of 3840x2160, the Low preset produces 61 FPS, the Medium preset produces 48 FPS with a range of 41 to 56 FPS, the High preset produces 39 FPS, and the Ultra preset produces 30 FPS. These numbers reveal a consistent pattern where each step up in settings costs approximately 20-30 percent of the frame rate, and each resolution increase from 1080p to 1440p to 4K imposes an additional 30-40 percent penalty. The Medium settings at each resolution are the only configurations with complete minimum and maximum data, indicating that this preset was the primary focus of stability testing. The Ultra preset at 4K represents the worst-case scenario with an average of 30 FPS, which is at the edge of playability for most users. The Low preset at 1080p represents the best-case scenario with 168 FPS, which is suitable for competitive play but may compromise visual clarity.

CPU Role

The AMD Ryzen 5 4600G provides the processing foundation for this configuration, and its specifications directly influence Fivem’s performance characteristics. This processor features 6 cores and 12 threads based on the Zen 2 architecture, with a base clock of 3.70 GHz and a boost clock of 4.20 GHz. The CPU’s cache hierarchy includes 64 KB of L1 cache per core, 512 KB of L2 cache per core, and 8 MB of shared L3 cache. These specifications determine how efficiently the CPU can handle Fivem’s game logic, network synchronization, and AI computations, which are particularly demanding in a multiplayer context. The CPU’s benchmark scores provide context for its capabilities: it achieves a Cinebench R23 multicore score of 13593 and a single-core score of 1919, along with a Geekbench multicore score of 6637 and single-core score of 1460. The single-core performance is particularly relevant for Fivem, as many game engine tasks are single-threaded. The CPU’s 3DMark scores show scaling from 1430 in the 2-thread test to 4889 in the max-thread test, indicating reasonable multi-threading efficiency. The Ryzen 5 4600G’s PassMark multithread score of 15992 and single-thread score of 2653 place it in the 71st percentile of all CPUs. The comparison with rivals shows tight competition: the AMD Ryzen 3 PRO 5355GE scores 17482, the AMD Ryzen 3 8300GE scores 17614, and the Intel Core 7 150U scores 17395, all within 1 percent of the 4600G’s 17507 average. This suggests that the CPU is not a weak link in the system, but its Zen 2 architecture from the 4000 series may limit peak performance in scenarios where newer architectures would excel. The CPU’s 65 W TDP and dual-channel DDR4 memory support with 51.2 GB/s bandwidth provide adequate data throughput for the GPU, though the PCIe Gen 3 interface with 20 lanes may constrain data transfer rates compared to newer platforms.