Downfall
This combination provides smooth gameplay with an average of 77 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 27 | 44 | 53 | 65 |
| 1440p QHD | 44 | 70 | 86 | 105 |
| 1080p Full HD | 62 | 99 | 120 | 147 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Downfall with AMD Ryzen 9 9900X3D + NVIDIA GeForce GTX 1660 Ti, In-Depth Analysis
The AMD Ryzen 9 9900X3D paired with the NVIDIA GeForce GTX 1660 Ti presents a stark contrast in capability within the horror title Downfall. The processor is a high-end, current-generation part, while the graphics card is an older, end-of-life model. The measured frame rates across resolutions and settings reveal a system where the GPU is the decisive factor in determining playable configurations, with the CPU's substantial headroom going largely unused in this specific title.
Resolution Scaling
The transition from 1080p to 4K demonstrates a classic pattern of GPU-bound scaling. At 1920x1080 with High settings, the combo produces an average of 99 FPS. Moving to 2560x1440 at the same High preset, the average drops to 70 FPS, a reduction of approximately 29%. The leap to 3840x2160 yields a further decline to 44 FPS, which is a 37% drop from the 1440p figure and a 56% decrease from the 1080p baseline. This steep and consistent decline in performance as resolution increases is the signature of a graphics card operating at its limit.
The data indicates that at 1080p, the system is still primarily GPU-limited, as even the lower settings show significant scaling. At Low settings, the average frame rate rises to 147 FPS at 1080p, but this falls to 105 FPS at 1440p and 65 FPS at 4K. The scaling factor from 1080p to 4K is roughly 2.26x, which is close to the pixel count difference (4x), though not perfectly linear due to other bottlenecks. This near-linear scaling strongly suggests that the GTX 1660 Ti's rendering throughput, rather than the CPU or memory subsystem, is the limiting component across all tested resolutions.
The frame rate drops are not uniform across settings. At 1080p, moving from Low to Medium reduces the average from 147 to 120 FPS (an 18% drop), while moving from Medium to High brings it down to 99 FPS (a 17.5% drop). The jump from High to Ultra is the most punishing, with the average plummeting to 62 FPS, a 37% reduction. This pattern repeats at 1440p and 4K, indicating that the Ultra preset introduces a rendering workload that the GTX 1660 Ti cannot handle efficiently, regardless of resolution.
GPU Role
The NVIDIA GeForce GTX 1660 Ti is built on the Turing architecture and features 6 GB of GDDR6 memory on a 192-bit bus, providing a bandwidth of 288.0 GB/s. Its boost clock is rated at 1770 MHz. In the context of Downfall, the 6 GB frame buffer appears sufficient for the tested presets, as the game is not likely exceeding this capacity at the measured settings. However, the card's raw compute power, rated at 5.437 TFLOPS FP32, is the primary constraint.
The GPU's percentile ranking against all GPUs is 41, placing it in the lower half of the performance spectrum. Its average benchmark score of 7723 puts it in close competition with cards like the AMD Radeon 540 (0.7% faster) and the AMD Radeon Pro WX 3100 (1.9% slower). This context explains the measured results: the GTX 1660 Ti is a capable 1080p card but struggles to maintain high frame rates at higher resolutions. The benchmark results show that the card's performance is particularly weak in newer API workloads, with a Passmark DirectX 12 score of just 51, which may be relevant to Downfall's rendering path.
The 12 nm process node and the card's 120 W TDP are historical details, but the practical impact is seen in the frame rates. The card's pixel rate of 84.96 GPixel/s and texture rate of 169.9 GTexel/s are the theoretical limits that directly translate to the observed scaling. At 4K Ultra, the average FPS falls to 27, which is below the threshold for smooth gameplay. The memory clock of 1500 MHz (12 Gbps effective) is a fixed specification; the data shows that the bottleneck is not memory bandwidth but the shader and texture processing throughput.
Settings Recommendations
For this specific CPU-GPU combo, the measured data provides clear guidance on optimal settings. At 1920x1080, the High preset offers an excellent balance, delivering an average of 99 FPS. This is well above the 60 FPS target and provides a smooth experience. The Medium preset at 1080p yields 120 FPS, which is smoother but may not offer a significant visual improvement over High in a horror game where atmosphere is key. The Ultra preset at 1080p drops to 62 FPS, which is playable but represents a significant performance cost for the highest visual fidelity.
At 2560x1440, the High preset’s average of 70 FPS is the recommended choice for a balance of visual quality and responsiveness. The Medium preset at 1440p delivers 86 FPS, which is also viable, but High provides a better visual experience for a modest FPS cost. The Ultra preset at this resolution falls to 44 FPS, which is not recommended for consistent gameplay.
At 3840x2160, the situation is more constrained. The High preset averages 44 FPS, which is borderline playable but may feel sluggish in a horror title. The Medium preset at 4K averages 53 FPS, which is the best option for playable frame rates at this resolution. The Low preset at 4K yields 65 FPS, but utilizing Low settings on a high-end CPU is a suboptimal trade-off. The Ultra preset at 4K is effectively unplayable at 27 FPS. Therefore, the data suggests that 1080p High is the overall sweet spot for this combination, with 1440p High being a viable alternative for users with higher-resolution displays who can tolerate slightly lower frame rates.
How This Combo Ranks
The combination of the Ryzen 9 9900X3D and GTX 1660 Ti ranks at 2520 out of 2928 tested combos in Downfall. This places it in the 14th percentile of all tested systems, indicating that it is a below-average performer for this game. This low ranking is almost entirely attributable to the graphics card. The CPU is a top-tier part, with a percentile ranking of 91 against all CPUs, but its capabilities are not being utilized due to the GPU bottleneck.
The rank of 2520 means that the vast majority of other tested combinations, which likely include more balanced or higher-end GPUs, achieve better performance in Downfall. The delta between this combo's performance and others is not directly provided, but the rank position is clear. The system is not competitive with modern gaming rigs in this title. The data suggests that the GTX 1660 Ti is the limiting factor, and any meaningful improvement in frame rates would require a GPU upgrade, as the CPU has ample headroom to support a much faster graphics card.
FAQ
*Q: What is the best resolution for this combo in Downfall?*
A: Based on the measured data, 1920x1080 is the best resolution for this combination. It provides the highest frame rates across all settings, with the High preset achieving 99 FPS on average.
*Q: Can this system handle 4K gaming in Downfall?*
A: Yes, but with significant compromises. At 3840x2160, only the Low and Medium presets provide average frame rates above 60 FPS (65 and 53 FPS, respectively). The High preset is playable at 44 FPS, while the Ultra preset is not (27 FPS).
Q: How does the GTX 1660 Ti compare to its nearest rivals?
A: The GTX 1660 Ti's average benchmark score is 7723. It is 0.7% slower than the AMD Radeon 540, but 1.9% faster than the AMD Radeon Pro WX 3100 and 2.2% faster than the AMD Radeon R7 250.
Q: Is the Ryzen 9 9900X3D a good match for the GTX 1660 Ti?
A: No, the data suggests a significant imbalance. The CPU is a high-performance part (91st percentile), while the GPU is in the 41st percentile. The benchmark results indicate the GPU is the bottleneck, especially at higher resolutions.
Q: What is the frame rate difference between Medium and High settings at 1440p?
A: At 2560x1440, the Medium preset averages 86 FPS, while the High preset averages 70 FPS. This is a 16 FPS difference (an 18.6% reduction for High settings).
Q: What is the minimum FPS recorded for the Medium preset at 1080p?
A: The measured data shows a minimum FPS of 102 at 1920x1080 with Medium settings, with a maximum of 138 FPS.
Measured FPS Breakdown
The following table details the exact average frame rates measured for this combination in Downfall. Minimum and maximum frame rates were only recorded for the Medium settings at each resolution.
| Resolution | Settings | Avg FPS | Min FPS | Max FPS |
| :--------- | :------- | ------: | ------: | ------: |
| 3840x2160 | Low | 65 | - | - |
| 3840x2160 | Medium | 53 | 45 | 61 |
| 3840x2160 | High | 44 | - | - |
| 3840x2160 | Ultra | 27 | - | - |
| 2560x1440 | Low | 105 | - | - |
| 2560x1440 | Medium | 86 | 73 | 99 |
| 2560x1440 | High | 70 | - | - |
| 2560x1440 | Ultra | 44 | - | - |
| 1920x1080 | Low | 147 | - | - |
| 1920x1080 | Medium | 120 | 102 | 138 |
| 1920x1080 | High | 99 | - | - |
| 1920x1080 | Ultra | 62 | - | - |
CPU Role
The AMD Ryzen 9 9900X3D is a 12-core, 24-thread processor based on the Zen 5 architecture (Granite Ridge). It has a base clock of 4.40 GHz and a boost clock of 5.50 GHz, with a substantial 128 MB of L3 cache. Its benchmark scores are very high, including a Cinebench R23 multi-core score of 47737 and a single-core score of 6739. These figures place it in the 91st percentile of all CPUs, and it is competitive with the Intel Core Ultra 5 245KF, which has an average score 0.6% higher.
In Downfall, the CPU's role is minimal due to the GPU bottleneck. The frame rates at 1080p Low (147 FPS) are the highest recorded, which still does not stress the CPU's full potential. The 3DMark 2-thread score of 2512 and single-thread score of 1269 indicate strong single-thread performance, which is often critical for game logic. However, the game's performance scaling with resolution and settings is entirely dictated by the GPU.
The CPU's high multi-threaded performance, evidenced by a Passmark multi-thread score of 56154, is not being utilized here. A game like Downfall, which is a horror title from 2016, is unlikely to be well-optimized for 24 threads. The data shows that the system's performance ceiling is defined by the GTX 1660 Ti. The processor's capabilities, such as its 4 nm process node and DDR5 memory support, are irrelevant to the measured FPS in this configuration because the GPU cannot feed frames fast enough to engage the CPU's full processing power. The Ryzen 9 9900X3D is effectively idle, waiting for the graphics card to deliver its frames.
Hardware Specifications
AMD Ryzen 9 9900X3D
NVIDIA GeForce GTX 1660 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 9900X3D + NVIDIA GeForce GTX 1660 Ti in Downfall
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 65.0 |
| 3840x2160 | Medium | 53.0 |
| 3840x2160 | High | 44.0 |
| 3840x2160 | Ultra | 27.0 |
| 2560x1440 | Low | 105.0 |
| 2560x1440 | Medium | 86.0 |
| 2560x1440 | High | 70.0 |
| 2560x1440 | Ultra | 44.0 |
| 1920x1080 | Low | 147.0 |
| 1920x1080 | Medium | 120.0 |
| 1920x1080 | High | 99.0 |
| 1920x1080 | Ultra | 62.0 |
Downfall with Ryzen 9 9900X3D + Other GPUs
See how Downfall performs with the same CPU but different graphics cards.
Downfall with GTX 1660 Ti + Other CPUs
See how Downfall performs with the same GPU but different processors.
Other Games with Ryzen 9 9900X3D + GTX 1660 Ti
Explore FPS benchmarks for other games using this same hardware combination.