Downfall

The AMD Ryzen 5 5600G and NVIDIA GeForce RTX 2060 combination lands at rank 1439 out of 1741 tested combos in Downfall, placing it in the lower half of the database’s performance leaderboard. This pairing sits in the 17th percentile of all tested configurations, indicating that while it can run the game, it is not positioned to deliver top-tier frame rates at high visual fidelity. The data shows a system that is decidedly mid-pack, with the GPU and CPU each holding their own respective performance tiers but neither pushing the other into upper-echelon territory.

How This Combo Ranks

The combo’s rank of 1439 out of 1741 reflects a fundamental reality: this is a 1080p-oriented setup that struggles as resolution and settings increase. The CPU, with an average benchmark score of 19983, ranks in the 78th percentile of all CPUs, placing it as a solid mainstream processor. Its nearest rivals include the Intel Core i7-11600H (0.2% ahead) and the Intel Core i7-11800H (0.2% behind), showing that the 5600G is competitive with mobile H-series chips from a previous generation. Meanwhile, the RTX 2060 sits at the 58th percentile of all GPUs, with an average score of 16074, placing it near the AMD Radeon RX 7600S (0.5% ahead) and the AMD Radeon Pro 5600M (1.7% behind).

When these two components are paired, the bottleneck dynamics become clear. The CPU’s 6 cores and 12 threads, based on Zen 3 architecture, provide ample processing power for a horror title like Downfall, which is not typically CPU-intensive. However, the GPU’s 6 GB of GDDR6 memory and Turing architecture become the limiting factor at higher resolutions. The benchmark results show that at 1080p Ultra, the combo achieves 73.6 FPS, which is playable but not exceptional. At 1440p Ultra, that number drops to 49.5 FPS, and at 4K Ultra, it falls to a marginal 29.9 FPS. These figures suggest that the RTX 2060 is the primary constraint, as the CPU’s headroom is not being fully utilized in this title.

FAQ

*Q: What is the best resolution for this combo in Downfall?*

A: The data shows that 1920x1080 is the sweet spot. At High settings, the combo delivers 116.1 FPS, which is well above the 60 FPS threshold. At 2560x1440, High settings yield 80.5 FPS, which is still playable, but 3840x2160 at High drops to 52.3 FPS, indicating the GPU is struggling to maintain high frame rates at 4K.

Q: How does the CPU compare to its nearest rivals?

A: The AMD Ryzen 5 5600G has an average benchmark score of 19983, which is within 0.2% of the Intel Core i7-11800H and 0.2% ahead of the Intel Core i7-11600H. This places it in a tight cluster of mid-range processors where performance differences are negligible in real-world gaming scenarios.

Q: Is the RTX 2060 a bottleneck for the Ryzen 5 5600G?

A: Benchmark results indicate yes, particularly at higher resolutions. At 1080p Low, the combo hits 172.5 FPS, but at 4K Ultra, it drops to 29.9 FPS. The GPU’s 6 GB VRAM and 192-bit memory bus are sufficient for 1080p but become strained at 4K, where the frame rate drops by roughly 83% compared to 1080p Low.

Q: What is the GPU’s performance percentile?

A: The RTX 2060 ranks in the 58th percentile of all GPUs, with an average benchmark score of 16074. Its closest competitor is the AMD Radeon RX 7600S, which is 0.5% ahead, and the AMD Radeon Pro 5600M, which is 1.7% behind.

Q: How does the combo perform at Ultra settings?

A: At Ultra settings, the combo achieves 73.6 FPS at 1080p, 49.5 FPS at 1440p, and 29.9 FPS at 4K. This shows a steep performance cliff as resolution increases, making Ultra settings viable only at 1080p.

Q: What is the CPU’s single-thread performance?

A: The Ryzen 5 5600G scores 2365 in Cinebench R23 single-core and 872 in 3DMark single-thread. These scores are typical for a 5000-series processor and are more than adequate for Downfall, which is not heavily threaded.

GPU Role

The NVIDIA GeForce RTX 2060 plays the dominant role in determining Downfall’s performance, especially at higher resolutions. The GPU operates at a base clock of 1365 MHz and a boost clock of 1680 MHz, with memory running at 1750 MHz (14 Gbps effective). Its 6 GB of GDDR6 memory on a 192-bit bus delivers 336.0 GB/s of bandwidth, which is adequate for 1080p but becomes a limiting factor at 4K. The GPU’s 1920 shading units and 48 ROPs are responsible for the pixel throughput, and the data shows that frame rates drop significantly as the resolution increases.

At 1080p Low, the combo achieves 172.5 FPS, suggesting the GPU has headroom. However, at 4K Ultra, the frame rate plummets to 29.9 FPS, indicating that the 6 GB VRAM is being saturated and the GPU’s compute capabilities are maxed out. The RTX 2060’s 30 RT cores and 240 tensor cores are present, but Downfall is a horror game from 2016 that does not appear to leverage ray tracing or DLSS, so these features have minimal impact on the measured results. The GPU’s 160 W TDP and dual-slot design are typical for this class, but the benchmark data shows that it is the bottleneck in this pairing, particularly at 4K where the CPU’s 6 cores are not the limiting factor.

Resolution Scaling

The measured FPS data reveals a clear pattern of scaling from 1080p to 4K. At Low settings, the combo delivers 172.5 FPS at 1080p, 125.6 FPS at 1440p, and 75.1 FPS at 4K. This represents a 56% drop from 1080p to 4K, indicating that the GPU is handling the increased pixel count but with diminishing returns. At High settings, the frame rates are 116.1 FPS at 1080p, 80.5 FPS at 1440p, and 52.3 FPS at 4K, a 55% drop. At Ultra settings, the drop is more severe: 73.6 FPS at 1080p falls to 49.5 FPS at 1440p and then to 29.9 FPS at 4K, a 59% reduction.

This scaling behavior points to the GPU as the primary limiting component. The CPU’s performance, as measured by its benchmark scores, does not degrade with resolution, but the GPU’s frame rate does. The data shows that the gap between 1080p and 1440p is relatively modest (around 30-35% on average), but the jump from 1440p to 4K is much larger, especially at Ultra settings where the frame rate nearly halves. This suggests that the 6 GB VRAM capacity is a hard constraint at 4K, and the GPU’s 336.0 GB/s bandwidth is insufficient to maintain high frame rates at that resolution. For a 1080p monitor, this combo is well-suited, but for 1440p, users will need to dial back settings, and 4K is only viable at Low settings.

Settings Recommendations

Based on the measured FPS rows, the optimal experience for this combo is at 1080p with High settings, yielding 116.1 FPS. This provides a smooth, responsive frame rate that is well above the 60 FPS threshold, and the visual quality is significantly better than Low settings. At Medium settings, the frame rate rises to 141.7 FPS, but the visual fidelity loss is noticeable in a horror game where atmosphere matters. The Ultra preset drops the frame rate to 73.6 FPS, which is still playable but leaves little headroom for demanding scenes.

For 1440p, the data suggests that High settings are the best choice, delivering 80.5 FPS. This is above 60 FPS and provides a good balance between visual quality and performance. Medium settings at 1440p yield 103.4 FPS, which is excellent for competitive play, but High is the recommended compromise. At 4K, the situation is more constrained. Low settings achieve 75.1 FPS, which is playable, but Medium drops to 65.9 FPS and High to 52.3 FPS, which may cause stuttering in intense moments. Ultra at 4K is not recommended, as 29.9 FPS is below the playable threshold for most users.

In summary, the data indicates that this combo is best suited for 1080p gaming, with High settings providing the best balance of frame rate and visual fidelity. For 1440p, High settings are still viable, but users should avoid Ultra. At 4K, only Low settings deliver a consistently playable experience, and even then, the frame rate is marginal. This configuration is a capable 1080p machine, but it lacks the GPU horsepower to push beyond that without significant compromises.