Downfall

The AMD Ryzen 5 5600G and Radeon RX 9070 XT pairing delivers a wide spread of frame rates in Downfall, ranging from a playable 58 FPS at 4K Ultra to a blistering 312 FPS at 1080p Low. The data indicates that this combo is heavily GPU-bound at higher resolutions, but the CPU’s capabilities become more relevant as settings are lowered and resolution drops. This analysis breaks down the measured performance across all twelve recorded configurations, examining the roles of the processor and graphics card, and offers practical settings guidance based strictly on the supplied benchmark results.

Resolution Scaling

The frame rate scaling from 1080p to 4K shows a classic pattern of increasing GPU load, with the CPU becoming less of a bottleneck as pixel count rises. At High settings, the average FPS drops from 209 at 1920x1080 to 150 at 2560x1440, and finally to 93 at 3840x2160. This represents a 55.5% reduction in average FPS when moving from 1080p to 4K, indicating that the Radeon RX 9070 XT is doing progressively heavier lifting. The scaling is not linear, which suggests that at 1080p High, the Ryzen 5 5600G is beginning to limit performance, preventing the GPU from reaching its full potential.

The Low settings row reinforces this interpretation. At 1920x1080 Low, the combo achieves 312 FPS average, which drops to 223 FPS at 2560x1440 and 139 FPS at 3840x2160. The 1080p to 1440p drop of 89 FPS is substantial, but the 1440p to 4K drop of 84 FPS is nearly identical in magnitude. This suggests that at Low settings, the system is still somewhat CPU-bound at 1080p, with the GPU taking over as the primary limiter at higher resolutions. The fact that 4K Low (139 FPS) is significantly higher than 4K High (93 FPS) shows that the GPU has ample headroom when texture and shading loads are reduced.

For Medium settings, the measured rows include min and max FPS values, providing a clearer picture of frame time consistency. At 1080p Medium, the average is 255 FPS with a minimum of 217 and maximum of 294, showing a tight range that indicates stable performance. At 1440p Medium, the average drops to 182 FPS, with min 155 and max 210. At 4K Medium, the average is 113 FPS, with min 96 and max 131. The gap between min and max FPS widens slightly as resolution increases, from 77 FPS at 1080p to 55 FPS at 1440p and 35 FPS at 4K, suggesting that frame pacing becomes more consistent as the GPU becomes the bottleneck.

The Ultra settings produce the most dramatic scaling. At 1080p Ultra, the average is 131 FPS, dropping to 93 FPS at 1440p and 58 FPS at 4K. The 1080p to 1440p drop of 38 FPS and the 1440p to 4K drop of 35 FPS are nearly identical, which is unusual compared to the other settings. This suggests that Ultra settings are so demanding that the GPU is the limiting factor even at 1080p, and the scaling reflects pure GPU workload increases rather than any CPU involvement. The 4K Ultra result of 58 FPS is the only configuration below 60 FPS in the entire dataset, making it the sole marginal playability case.

CPU Role

The AMD Ryzen 5 5600G is a 6-core, 12-thread processor based on the Zen 3 architecture, with a base clock of 3.90 GHz and a boost clock of 4.40 GHz. It features 16 MB of L3 cache and supports DDR4 memory with a dual-channel bus. The CPU’s benchmark scores place it in the 74th percentile against all CPUs, with an average benchmark score of 21088. Its nearest rivals include the Intel Core i3-1220P (score 21066, delta 0.1%), the Intel Core Ultra 7 256V (score 21112, delta -0.1%), and the AMD Ryzen 5 7530U (score 21133, delta -0.2%). This indicates that the 5600G performs almost identically to these alternatives, with deltas of less than half a percent.

In Downfall, the CPU’s role is most evident at 1080p with lower settings. At 1080p Low, the combo reaches 312 FPS, which is 49.3% higher than the 209 FPS at 1080p High. This large gap suggests that at Low settings, the CPU is able to feed frames to the GPU faster, but the GPU is still not fully saturated. The 3.90 GHz base clock and 4.40 GHz boost clock are modest by modern standards, but the 6 cores and 12 threads appear sufficient for this horror title, as the game does not seem to be heavily multi-threaded based on the scaling pattern. The 16 MB L3 cache and 51.2 GB/s memory bandwidth are likely adequate for the game’s data requirements, though the PCIe Gen 3 interface could theoretically limit GPU communication compared to newer platforms.

The Cinebench R23 multicore score of 10551 and single-core score of 1409 provide context for the CPU’s capabilities. The single-core performance is particularly relevant for older titles like Downfall (released in 2016), which often rely on fewer threads. The 3DMark single-thread score of 872 and 2-thread score of 1705 further suggest that the processor has moderate per-core strength. At 4K Ultra, where the GPU is clearly the bottleneck, the CPU’s role diminishes, and the system delivers 58 FPS regardless of the processor’s theoretical limits. The data shows that the Ryzen 5 5600G is not a limiting factor at 4K, but it may be slightly holding back performance at 1080p Low.

GPU Role

The AMD Radeon RX 9070 XT is a RDNA 4.0 architecture GPU with 16 GB of GDDR6 memory on a 256-bit bus, providing a bandwidth of 644.6 GB/s. It has a base clock of 1660 MHz, a game clock of 2400 MHz, and a boost clock of 2970 MHz. The GPU features 4096 shading units, 256 TMUs, and 128 ROPs, along with 64 ray tracing cores. Its FP32 performance is rated at 48.66 TFLOPS, and it has a TDP of 304 W. The GPU’s benchmark scores place it in the 55th percentile against all GPUs, with an average benchmark score of 13543. Its nearest rivals include the AMD Radeon HD 7770M (score 13536, delta 0.1%), the NVIDIA GeForce GTX 570 (score 13515, delta 0.2%), and the NVIDIA P106-090 (score 13470, delta 0.5%). These deltas are all within 1%, suggesting that the 9070 XT performs similarly to these much older cards in synthetic benchmarks, which is notable given its modern architecture.

In Downfall, the GPU’s role is dominant at all resolutions and settings. The 16 GB VRAM is more than sufficient for this 2016 title, even at 4K Ultra, where the game is unlikely to exceed 8 GB of usage. The 644.6 GB/s memory bandwidth ensures that texture streaming is not a bottleneck, as evidenced by the smooth min FPS values at Medium settings across all resolutions. The boost clock of 2970 MHz is high, and the GPU appears to sustain close to this frequency under load, as the 4K Medium result of 113 FPS (min 96, max 131) shows consistent performance without major dips.

The GPU’s PassMark G3D score of 26795 and 3DMark Steel Nomad DX12 score of 7260 are the most relevant benchmarks for gaming. The DirectX 12 score of 78 in PassMark is oddly low, but the game likely uses an older DirectX version given its release date. The Geekbench Vulkan score of 65879 indicates strong API performance. The GPU’s 55th percentile ranking is surprisingly low for a modern card, but the nearest rivals being older GPUs suggests that the benchmark database may have limited data for this new product. In practice, the measured FPS results show that the 9070 XT is more than capable of handling Downfall at high frame rates.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates. Low settings produce an average of 312 FPS, Medium yields 255 FPS (min 217, max 294), High produces 209 FPS, and Ultra drops to 131 FPS. The gap between Low and Ultra is 181 FPS, indicating that settings have a massive impact on performance at this resolution. The Medium settings row shows a min FPS of 217, which is still above the refresh rate of most monitors, ensuring smooth gameplay.

At 2560x1440, the performance scales down proportionally. Low settings average 223 FPS, Medium averages 182 FPS (min 155, max 210), High averages 150 FPS, and Ultra averages 93 FPS. The Medium settings min FPS of 155 is still very playable, and even Ultra at 93 FPS is well above the 60 FPS threshold. The drop from 1080p to 1440p is consistent across settings, ranging from 89 FPS for Low to 38 FPS for Ultra, showing that the GPU handles the increased pixel count gracefully.

At 3840x2160, the combo begins to show its limits. Low settings average 139 FPS, Medium averages 113 FPS (min 96, max 131), High averages 93 FPS, and Ultra averages 58 FPS. The Ultra setting is the only configuration in the entire dataset that falls below 60 FPS, making it borderline for smooth gameplay. The Medium settings min FPS of 96 is still comfortable, but the gap between Medium and High at 4K is 20 FPS, which is smaller than at lower resolutions, suggesting that the GPU is becoming saturated.

Across all resolutions, the Medium settings offer the best balance of performance and visual quality, with minimum FPS values that are always above 96 FPS. The Low settings provide the highest frame rates but likely sacrifice visual fidelity, while Ultra settings are only recommended at 1080p where 131 FPS is still achievable.

How This Combo Ranks

The combination of the AMD Ryzen 5 5600G and AMD Radeon RX 9070 XT ranks 910th out of 3716 tested combos in Downfall, placing it in the top 24.5% of all configurations. This rank is lower than the CPU’s individual percentile (74th) but higher than the GPU’s percentile (55th), suggesting that the pairing is more effective than either component’s standalone benchmark would indicate. The rank of 910 out of 3716 means that there are 909 combos that perform better, which is a significant number, but it also means that this combo outperforms 2806 other configurations tested.

The ranking is likely influenced by the CPU’s relatively modest single-thread performance compared to newer processors, as Downfall is an older title that may not scale well with many cores. The GPU’s high VRAM capacity and bandwidth are not fully utilized by a game from 2016, but the raw compute power still drives high frame rates. The fact that this combo ranks in the top quarter suggests that it is a capable pairing for this game, even if it does not reach the top 10% where more balanced or higher-end components would sit.

The nearest CPU rivals to the 5600G (Intel Core i3-1220P, Intel Core Ultra 7 256V, AMD Ryzen 5 7530U) all have nearly identical average scores, so the performance difference in Downfall would likely come down to the GPU. Similarly, the GPU’s nearest rivals (AMD Radeon HD 7770M, NVIDIA GeForce GTX 570, NVIDIA P106-090) are all older cards with much lower specifications, yet their average scores are within 1% of the 9070 XT, which confirms the benchmark database’s methodology.

Settings Recommendations

Based on the measured FPS data, the Medium preset provides the best overall experience across all three resolutions. At 1080p Medium, the combo delivers 255 FPS average with a minimum of 217 FPS, which is more than enough for any high-refresh-rate monitor. At 1440p Medium, the average is 182 FPS with a minimum of 155 FPS, still comfortably above 144 Hz. At 4K Medium, the average is 113 FPS with a minimum of 96 FPS, which is excellent for 4K gaming and maintains smooth frame pacing.

The High preset is a viable alternative for those who prioritize visual quality over absolute frame rates. At 1080p High, the average of 209 FPS is still very high, and at 1440p High, 150 FPS is excellent. However, at 4K High, the average drops to 93 FPS, which is still playable but less headroom for demanding scenes. The Low preset is only recommended for competitive play or extreme frame rate chasing, as it delivers 312 FPS at 1080p, but the visual downgrade is likely too severe for a horror game where atmosphere matters.

The Ultra preset is not recommended for 4K, as the 58 FPS average is below the 60 FPS target and may result in noticeable stuttering. At 1440p Ultra, 93 FPS is acceptable, and at 1080p Ultra, 131 FPS is good. However, given that the Medium preset at 4K offers 113 FPS, which is nearly double the Ultra preset’s 58 FPS, the visual difference between Medium and Ultra may not justify the performance hit. For the best experience, Medium settings at 1440p or 4K, or High settings at 1080p, offer the optimal balance of frame rate and visual fidelity.