Archeage

The AMD Ryzen 5 5600G paired with the NVIDIA GeForce RTX 2060 delivers a performance profile in Archeage that is heavily dictated by resolution and graphical preset. The data reveals a system capable of smooth 1080p play at medium settings, but one that struggles to maintain frame rates at higher resolutions and with more demanding presets. This analysis breaks down the measured results, placing them in context with the hardware's theoretical capabilities and its standing among other tested combinations.

Resolution Scaling

The measured FPS data shows a clear and pronounced drop as resolution increases, indicating that the GPU becomes the primary bottleneck at higher pixel counts. At 1080p with Low settings, the system achieves an average of 117.8 FPS. This drops to 78.5 FPS at 1440p and further to 45.8 FPS at 4K. This represents a significant 61% reduction in frame rate from 1080p to 4K on the Low preset.

The scaling pattern is consistent across all settings. For instance, on the High preset, the average FPS falls from 70.6 at 1080p to 46 at 1440p, and finally to 26.9 at 4K. The drop from 1080p to 1440p is a 35% reduction, while the jump to 4K results in a further 42% loss. This steep decline, particularly at 4K, strongly suggests that the RTX 2060's rendering capabilities are the limiting factor. The GPU's 6 GB of VRAM and 192-bit memory bus, providing 336.0 GB/s of bandwidth, are likely saturated by the increased pixel load, especially with the more complex shaders and effects enabled.

Conversely, the relatively smaller performance gap between 1080p and 1440p on lower presets implies that the CPU is still able to feed the GPU adequately at these resolutions. However, the system's inability to maintain playable frame rates at 4K on any preset—the highest average being 45.8 FPS on Low—points to a hard ceiling imposed by the graphics card. The data suggests that for a smooth experience, users should target 1080p or 1440p, as the 4K resolution simply demands more from the GPU than it can deliver in this MMORPG.

FAQ

Q: What is the best resolution for this combo in Archeage?

A: Based on the measured data, 1920x1080 is the only resolution where all presets achieve an average FPS above 46.3. The 2560x1440 resolution is also viable, but only with Low and Medium settings, which reach 78.5 and 67.5 FPS respectively.

Q: How does the RTX 2060's performance compare to its closest rivals?

A: The GPU's average benchmark score is 16074. It is 0.5% ahead of the AMD Radeon RX 7600S, which scores 15996, and 1.8% ahead of the AMD Radeon Pro W5500, which scores 15786. However, it trails the AMD Radeon Pro 5600M and Pro 5700, both scoring 16351, by 1.7%.

Q: Is the Ryzen 5 5600G a strong performer for this game?

A: The CPU has a 78th percentile ranking among all CPUs, indicating it is a solid processor. Its average benchmark score of 19983 is remarkably close to its nearest rivals, with a performance delta of only 0.2% to 0.3% compared to the Intel Core i7-11600H, Intel Core i7-11800H, and AMD EPYC 7713P.

Q: What is the impact of the Ultra preset on performance?

A: The Ultra preset is extremely demanding. At 1080p, it yields an average of 46.3 FPS, which is less than half of the Low preset's 117.8 FPS. At 1440p, this falls to 33.2 FPS, and at 4K, it drops to an unplayable 21.7 FPS.

Q: Does the 6 GB VRAM of the RTX 2060 appear to be a limiting factor?

A: The steep performance degradation at 4K, where even Low settings only manage 45.8 FPS, suggests that the GPU's memory capacity and bandwidth are being overwhelmed. The 336.0 GB/s bandwidth is likely insufficient for the massive texture loads at 3840x2160.

Q: How does this specific combo rank against all tested combinations?

A: The combination of the Ryzen 5 5600G and RTX 2060 ranks 1421 out of 1727 tested combos for Archeage, placing it in the lower portion of the performance spectrum.

GPU Role

The NVIDIA GeForce RTX 2060 is a Turing-architecture GPU built on a 12 nm process. It has a base clock of 1365 MHz and a boost clock of 1680 MHz. Its memory subsystem consists of 6 GB of GDDR6 on a 192-bit bus, which provides a bandwidth of 336.0 GB/s. In the context of Archeage, these specifications translate into a mixed performance picture.

The GPU's 58th percentile ranking among all GPUs and its average benchmark score of 16074 suggest it is a mid-range performer. This is reflected in the measured FPS, where it can comfortably handle 1080p and 1440p on lower settings but struggles with higher presets and 4K. The data implies that the GPU's raw compute power, rated at 6.451 TFLOPS FP32, is sufficient for the game at moderate settings, but its memory bandwidth and capacity become a bottleneck at higher resolutions.

The performance gap between the Low and Ultra presets is telling. At 1080p, the difference is a 71.5 FPS drop (from 117.8 to 46.3). This is due to the increased load on the GPU's shading units, TMUs, and ROPs. The RTX 2060 has 1920 shading units, 120 TMUs, and 48 ROPs, and the Ultra preset's effects, such as shadows and post-processing, require significantly more work from these components. The GPU's 30 RT cores and 240 tensor cores, while present, are not likely to be heavily utilized in this MMORPG, making the standard CUDA core performance the key factor.

Measured FPS Breakdown

The measured data provides a comprehensive view of performance across three resolutions and four settings. At 1920x1080, the system is at its most capable. The Low preset achieves an average of 117.8 FPS, which is excellent for a smooth experience. Medium settings still deliver a very playable 106.5 FPS. The High preset drops to 70.6 FPS, which is still acceptable for most players. The Ultra preset, however, brings the average down to 46.3 FPS, which may introduce noticeable stutter in crowded areas.

Moving to 2560x1440, the impact of the increased pixel count is clear. The Low preset's average FPS falls to 78.5, and Medium settings produce 67.5 FPS. High settings yield 46 FPS, which is on the edge of playability. The Ultra preset is significantly more demanding, with an average of only 33.2 FPS, making it a poor choice at this resolution.

At 3840x2160, the performance is largely prohibitive for a good experience. The Low preset manages 45.8 FPS, which is the only setting to break the 30 FPS threshold. Medium settings drop to 38.8 FPS, High settings to 26.9 FPS, and Ultra settings to just 21.7 FPS. The data indicates that 4K gaming is not a viable option for this hardware combination in Archeage, as even the lowest settings fail to provide a consistently smooth frame rate.

CPU Role

The AMD Ryzen 5 5600G is a 6-core, 12-thread processor based on the Zen 3 architecture. It has a base clock of 3.90 GHz and a boost clock of 4.40 GHz. Its 16 MB of L3 cache and dual-channel DDR4 memory support provide a solid foundation for gaming. The CPU's benchmark scores, such as a Cinebench R23 multicore score of 16758 and a single-core score of 2365, indicate strong performance.

In the context of Archeage, an MMORPG that can be sensitive to CPU performance in large-scale battles, this processor is likely a capable partner for the RTX 2060 at lower resolutions. The 78th percentile ranking and an average benchmark score of 19983 show it is not a weak link. The fact that the FPS at 1080p on Low (117.8) is significantly higher than at 1440p (78.5) suggests that the CPU is able to push frame rates well above what the GPU can render at higher resolutions.

The data does not show a scenario where the CPU is the primary bottleneck, as FPS scales down consistently with resolution. However, the CPU's 12 threads and high single-thread performance are likely sufficient for the game's logic and draw calls, especially at 1080p where the GPU is able to render frames quickly. The Ryzen 5 5600G's performance is nearly identical to its nearest rivals, with a delta of only 0.2% to 0.3% compared to the Intel Core i7-11600H and i7-11800H, meaning it provides a comparable level of processor performance for this title.

Settings Recommendations

Based on the measured FPS, the optimal preset depends heavily on the user's target resolution and preference for smoothness versus visual fidelity. For a 1080p display, the Medium preset, which delivers an average of 106.5 FPS, is the best recommendation. It offers a significant visual upgrade over Low while still maintaining a frame rate high enough for a fluid experience. The High preset at 70.6 FPS is also acceptable for those who prioritize visuals, but the step up to Ultra, which halves the performance to 46.3 FPS, is not justified by the likely marginal visual improvement.

At 1440p, the Medium preset is the clear winner, providing a very playable 67.5 FPS. The Low preset is slightly faster at 78.5 FPS, but the visual compromise may not be worth it. The High preset at 46 FPS is playable but may feel less smooth, and Ultra should be avoided due to its low 33.2 FPS average. For 4K users, the data suggests that this hardware is not suited for the task. The Low preset's 45.8 FPS is the only remotely playable option, and even then, it is below the ideal 60 FPS threshold. Users with a 4K monitor should consider lowering their resolution or upgrading their GPU.

How This Combo Ranks

The combination of the AMD Ryzen 5 5600G and the NVIDIA GeForce RTX 2060 achieves a rank of 1421 out of 1727 tested combos in Archeage. This places it in the bottom 18% of all tested systems, indicating that it is a below-average performer for this specific game. This ranking is more a reflection of the game's demanding nature and the age of the components than a sign of a fundamental flaw.

The GPU's 58th percentile and CPU's 78th percentile rankings suggest that each component is individually decent, but their combination does not boost them in this title. The rank implies that many other hardware pairings are capable of achieving higher frame rates, likely due to more powerful GPUs that can better handle Archeage's high-resolution demands. The data shows that while this combo is perfectly serviceable for 1080p gaming, it is not a top-tier setup for this MMORPG, and users seeking higher performance at 1440p or 4K will need to consider more powerful components.