Doom

The Intel Core i7-14700F paired with the NVIDIA GeForce RTX 3060 Ti delivers a robust 1080p and 1440p experience in Doom, with the data showing a clear shift toward GPU limitation at higher resolutions. This combo ranks in the 50th percentile (1839 out of 3712 tested combinations), indicating a balanced mid-tier pairing. The measured frames per second (FPS) across all settings and resolutions reveal a system that excels at high refresh rate 1080p gaming, remains highly playable at 1440p, and can even handle 4K at adjusted settings. The following analysis breaks down the specific performance characteristics, component roles, and optimal settings based solely on the provided benchmark data.

FAQ

Q: What is the average FPS at 1080p with Ultra settings?

A: The measured average FPS at 1920x1080 with Ultra settings is 142 frames per second. This indicates that the combination of the Intel Core i7-14700F and NVIDIA GeForce RTX 3060 Ti can handle maximum settings at this resolution with a high degree of fluidity.

Q: How much performance is gained by switching from Ultra to Low settings at 1440p?

A: At 2560x1440, the average FPS increases from 92 on Ultra settings to 153 on Low settings. This represents a significant jump of 61 frames per second, demonstrating that the graphics preset has a substantial impact on performance at this resolution, likely due to the increased pixel count stressing the GPU.

Q: Is the RTX 3060 Ti capable of 4K gaming in Doom?

A: Yes, the data shows the GPU can handle 4K, but with some compromises. At 3840x2160, the average FPS is 61 on High settings and 50 on Ultra. While playable, the High preset offers a better balance, and the Low preset at 83 FPS shows that the card can push much higher frame rates if visual fidelity is reduced.

Q: What is the lowest average FPS recorded in the dataset?

A: The lowest average FPS recorded is 50 at 3840x2160 resolution with Ultra settings. This is the most demanding configuration tested, highlighting that while 4K is possible, it pushes the RTX 3060 Ti to its limits in this title.

Q: How does the combo's performance rank among all tested combinations?

A: The combination of the Intel Core i7-14700F and NVIDIA GeForce RTX 3060 Ti ranks 1839 out of 3712 total combinations for Doom. This places it near the middle of the field, suggesting it is a competent but not top-tier pairing for this specific game.

Q: What is the maximum FPS recorded in the entire dataset?

A: The maximum FPS recorded is 237, which occurs at 1920x1080 resolution with Medium settings. The Low preset also reaches a high of 236 FPS on average, showing the game engine and hardware can scale to very high frame rates at lower resolutions.

GPU Role

The NVIDIA GeForce RTX 3060 Ti is the primary driver of frame rate changes across different quality presets, particularly at higher resolutions. Its 8 GB of GDDR6 memory on a 256-bit bus provides 448.0 GB/s of bandwidth, which is sufficient for the texture and geometry loads in Doom at the tested settings. The GPU's architecture, Ampere, built on an 8 nm process, features 4864 shading units, 152 texture mapping units, and 80 raster output pipelines. These specifications, along with a base clock of 1410 MHz and a boost clock of 1665 MHz, directly influence the pixel and texture fill rates, which are critical for maintaining high FPS.

The benchmark results show a clear pattern: as settings increase from Low to Ultra at the same resolution, the average FPS drops consistently. For instance, at 2560x1440, the average FPS falls from 153 on Low to 92 on Ultra. This performance scaling is a direct result of increased GPU workload. The RTX 3060 Ti's raw compute power, measured at 16.20 TFLOPS for FP32 operations, is being taxed more heavily with each progressive preset. The data suggests that while the GPU is the limiting factor at higher resolutions, it is not necessarily the bottleneck at 1080p, where the CPU can feed frames fast enough to keep the GPU busy.

The GPU's performance percentile of 59 compared to all other GPUs indicates it is a solid mid-range performer. Its average benchmark score of 16129 is closely matched by rivals like the AMD Radeon RX 5700 XT, which has a score of 16361 and a deltaPct of -1.4. This proximity in synthetic benchmarks aligns with the measured FPS, confirming that the RTX 3060 Ti is a capable card for this era of gaming, but its strengths are best showcased at 1080p and 1440p rather than at 4K.

Resolution Scaling

The FPS scaling from 1080p to 4K clearly illustrates the shift in system bottleneck from the CPU to the GPU. At 1920x1080 with High settings, the average FPS is 174. This drops to 113 at 2560x1440, a reduction of 35%, and then further to 61 at 3840x2160, a 46% reduction from the 1440p figure. This pattern is consistent across all settings, with the most dramatic drop occurring between 1440p and 4K.

For instance, on Ultra settings, the average FPS goes from 142 at 1080p to 92 at 1440p (a 35% drop) and then to 50 at 4K (a 46% drop). This increasing rate of decline with resolution suggests that the RTX 3060 Ti is becoming the primary limiting component as the pixel count grows. The GPU's 8 GB of VRAM and its memory bandwidth are being saturated at 4K, especially on higher presets. The data indicates that at 1080p, the Intel Core i7-14700F has enough headroom to keep the GPU fed, as evidenced by the high frame rates. However, as resolution increases, the GPU's rendering workload multiplies, and it can no longer maintain the same frame production rate.

This analysis is supported by the fact that the percentage drop from 1080p to 1440p is similar across all presets, but the drop from 1440p to 4K is steeper. For example, on Low settings, the FPS drops from 236 at 1080p to 153 at 1440p (35% drop), and then to 83 at 4K (46% drop). This non-linear scaling is a classic indicator of a GPU-bound scenario at 4K, where the card's computational limits are reached, whereas at lower resolutions, the system is more balanced.

How This Combo Ranks

The Intel Core i7-14700F and NVIDIA GeForce RTX 3060 Ti combination holds a rank of 1839 out of 3712 tested combos in Doom, placing it in the 50th percentile. This mid-pack ranking suggests that while this pairing is competent, there are many other configurations that deliver higher frame rates in this game. The data shows this is not an extreme high-end or low-end pairing, but rather a balanced one that offers a solid experience for most users.

The CPU's percentile of 91 among all processors is notably higher than the GPU's percentile of 59. This disparity indicates that the processor is a stronger component relative to its peers than the graphics card. Consequently, the combo's overall ranking is likely held back by the GPU's performance ceiling. The data suggests that pairing the i7-14700F with a more powerful GPU would yield a higher combo rank, as the CPU has more performance headroom to offer. The GPU's nearest rivals, such as the AMD Radeon RX 5700 XT, have comparable average benchmark scores, confirming that the RTX 3060 Ti is the limiting factor in this particular pairing.

The rank of 1839 out of 3712 is a clear indicator that this system is tailored for high-refresh-rate 1080p gaming and solid 1440p performance, rather than as a top-tier 4K contender. The measured FPS data reinforces this, with 4K Ultra settings dipping to an average of 50 FPS, which is below the level many users consider ideal for a smooth experience. In summary, the combo rank reflects a well-balanced, mid-range system that excels in its intended resolution range.

CPU Role

The Intel Core i7-14700F serves as the foundational component for this system, providing ample processing power to support the RTX 3060 Ti. With 20 cores and 28 threads, this processor is built on the Raptor Lake architecture and can boost up to 5.40 GHz, with a base clock of 2.10 GHz. This high core count and clock speed are crucial for ensuring that the CPU does not become a bottleneck, especially at lower resolutions where the GPU can produce frames very quickly.

The CPU's Cinebench R23 multi-core score of 35122 and single-core score of 4958 demonstrate its strong multi-threaded and single-threaded capabilities. In a game like Doom, which is often sensitive to single-core performance for game logic and draw calls, the 5.40 GHz boost clock is a significant advantage. The data shows that at 1080p, the system achieves an average of 236 FPS on Low settings, which is a frame rate that would be difficult to reach if the CPU were a limiting factor. This indicates that the i7-14700F has sufficient headroom to keep up with the GPU's frame output at this resolution.

The processor's 33 MB of shared L3 cache helps reduce memory latency, which is beneficial for gaming. Its 65 W TDP is relatively modest for a 20-core processor, suggesting efficient power delivery. The data strongly suggests that the CPU is not the primary performance limiter in this system, as the frame rate drops more significantly with resolution increases, which primarily affect the GPU. The CPU's percentile rank of 91 versus the GPU's 59 further supports this conclusion, indicating that the processor is a higher-performing component relative to its market segment.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of performance across all settings and resolutions. At 1920x1080, the system performs exceptionally well. The average FPS is 236 on Low, 206 on Medium, 174 on High, and 142 on Ultra. The Medium preset shows a minimum FPS of 175 and a maximum of 237, indicating consistency. These numbers suggest that for 1080p gaming, users can comfortably use Ultra settings for a high-refresh-rate experience, as the average FPS is well above 100.

Moving to 2560x1440, the average FPS drops as expected. The results are 153 on Low, 133 on Medium, 113 on High, and 92 on Ultra. The Medium preset's min and max FPS are 113 and 153, respectively. These figures show that 1440p gaming is still very viable, with even the Ultra preset averaging above 90 FPS, which is generally considered playable for fast-paced titles. The performance scaling from Low to Ultra is roughly a 40% reduction, demonstrating the GPU's workload increasing with visual quality.

At 3840x2160, the RTX 3060 Ti begins to struggle with the highest presets. The average FPS is 83 on Low, 72 on Medium, 61 on High, and 50 on Ultra. The Medium preset has a min FPS of 61 and a max of 83. While the game remains playable on High settings, the Ultra preset's average of 50 FPS is right at the edge of what is typically considered smooth for an FPS. The data shows a clear trade-off: to achieve a stable 60 FPS or higher at 4K, users must select High or lower settings.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the user's resolution and frame rate priorities. For 1920x1080, the Ultra preset is the clear recommendation. With an average FPS of 142, it provides a highly responsive experience that exceeds the refresh rate of most standard monitors. Even the minimum FPS would likely be well above 100, ensuring smooth gameplay. There is no reason to compromise on visual quality at this resolution, as the hardware has ample headroom.

For 2560x1440, the High preset is recommended for the best balance of visual fidelity and performance. The average FPS of 113 is excellent for a competitive FPS, providing a fluid experience on high refresh rate monitors. While Ultra averages 92 FPS and is also playable, the High preset offers a more comfortable margin above 100 FPS, which can be beneficial for reducing input lag. If a user prefers maximum visual quality, Ultra is a viable option, but High provides a more consistent experience.

For 3840x2160, the High preset is the best choice. The average FPS of 61 is right at the threshold for smooth gameplay, and it offers a significant improvement over the Ultra preset's 50 FPS. The Low and Medium presets provide higher frame rates, but they sacrifice too much visual quality. Therefore, the High preset represents the sweet spot for 4K gaming with this hardware, enabling a playable experience without dropping to the lowest settings. Users with 120 Hz or higher 4K displays would need to consider the Low preset, which averages 83 FPS, to approach higher refresh rates.