Doom

The AMD Ryzen 9 5950X paired with the NVIDIA GeForce RTX 3060 Ti delivers a strong 1080p experience in Doom, with the CPU's high single-thread performance pushing frame rates well past 200 FPS at low settings. At 4K, the GPU becomes the limiting factor, with average frame rates dropping to 62 FPS on High settings. This combination of a top-tier 16-core processor and a mid-range Ampere GPU produces a balanced system that excels at lower resolutions but requires settings adjustments for 4K play.

Resolution Scaling

The measured FPS data shows a steep drop as resolution increases from 1920x1080 to 3840x2160. At High settings, the average frame rate falls from 171.5 FPS at 1080p to 113 FPS at 1440p, then to 62 FPS at 4K. The same pattern appears across all settings: Low goes from 238.7 to 154 to 85.4, Medium from 207.4 to 132.9 to 75, and Ultra from 145.1 to 94.6 to 51.9. This scaling indicates that the RTX 3060 Ti is the primary bottleneck at higher resolutions, while the Ryzen 9 5950X has ample headroom to feed the GPU at 1080p.

At 1080p Low, the combo reaches 238.7 FPS, a figure that suggests the CPU is not limiting the frame rate. The 5950X's boost clock of 4.90 GHz and its strong single-thread performance (Cinebench R23 single-core score of 5450) allow the GPU to run at its maximum potential. As resolution climbs, the GPU's workload increases, and the frame rate drops proportionally. The gap between Low and Ultra at 1080p is 93.6 FPS (238.7 vs 145.1), but at 4K that gap narrows to 33.5 FPS (85.4 vs 51.9), further confirming that the GPU is the limiting factor at 4K.

How This Combo Ranks

In the benchmark database, this CPU-GPU combination ranks 874 out of 1681 tested combos, placing it in the upper half of all configurations. The CPU itself sits in the 93rd percentile of all processors, while the GPU is in the 69th percentile. This disparity highlights that the Ryzen 9 5950X is a much stronger component relative to its peers than the RTX 3060 Ti. The combo's overall rank reflects the GPU's mid-range positioning, as the CPU's high performance cannot fully compensate for the GPU's limits at higher resolutions.

The nearest rivals for the CPU include the Intel Core i5-14600K, which has an average benchmark score of 49166, just 0.2% higher than the 5950X's 49062. The i5-14600KF scores 49367 (0.6% higher), while the Intel Xeon Gold 5318H scores 48698 (0.7% lower) and the AMD EPYC 4345P scores 49595 (1.1% higher). These small deltas show that the 5950X is competitive with modern mid-range and server chips, despite being released earlier. For the GPU, the nearest rivals are the AMD Radeon RX 6700M (25180, 0.2% lower), RX 6600 (25235, 0.5% lower), Radeon 890M (25246, 0.5% lower), and RX 580 2048SP (25287, 0.7% lower). The RTX 3060 Ti's average score of 25120 places it just below these cards, indicating it is a solid mid-range option.

CPU Role

The AMD Ryzen 9 5950X is a 16-core, 32-thread processor based on the Zen 3 architecture, codenamed Vermeer. It operates at a base clock of 3.40 GHz and boosts up to 4.90 GHz, with a TDP of 105 W. The CPU features 64 MB of L3 cache and supports DDR4 memory in a dual-channel configuration with a bandwidth of 51.2 GB/s. Its benchmark results are impressive: Cinebench R23 multi-core score of 38607, single-core of 5450, Geekbench multi-core of 12084, single-core of 2211, and Passmark multi-thread of 45424. These numbers place the 5950X in the 93rd percentile of all CPUs, making it a top-tier processor for both multi-threaded and single-threaded workloads.

In Doom, a fast-paced FPS from 2016, the CPU's single-thread performance is particularly important. The game's engine benefits from high clock speeds and strong per-core efficiency. The 5950X's boost clock of 4.90 GHz and its Cinebench R23 single-core score of 5450 ensure that the CPU can keep up with the GPU at lower resolutions. The measured FPS at 1080p Low (238.7) and Medium (207.4) demonstrates that the CPU is not a bottleneck in these scenarios. Even at 1080p Ultra, the combo maintains 145.1 FPS, which is well above the 60 FPS threshold for smooth gameplay. The CPU's 16 cores and 32 threads are more than sufficient for Doom, which likely does not utilize all of them, but the high single-thread performance is what drives the frame rates.

Measured FPS Breakdown

The following table lists the average FPS for each resolution and settings combination:

| Resolution | Settings | Avg FPS |

|------------|----------|---------|

| 3840x2160 | High | 62 |

| 3840x2160 | Low | 85.4 |

| 3840x2160 | Medium | 75 |

| 3840x2160 | Ultra | 51.9 |

| 2560x1440 | High | 113 |

| 2560x1440 | Low | 154 |

| 2560x1440 | Medium | 132.9 |

| 2560x1440 | Ultra | 94.6 |

| 1920x1080 | High | 171.5 |

| 1920x1080 | Low | 238.7 |

| 1920x1080 | Medium | 207.4 |

| 1920x1080 | Ultra | 145.1 |

At 1080p, all settings deliver frame rates above 145 FPS, making the combo suitable for high-refresh-rate monitors. The Low setting reaches 238.7 FPS, while Ultra still achieves 145.1 FPS, so even the most demanding preset is playable. At 1440p, the frame rates remain strong: Low hits 154 FPS, Medium 132.9, High 113, and Ultra 94.6. This resolution is a sweet spot for the RTX 3060 Ti, as even Ultra stays above 90 FPS. At 4K, the GPU's limitations become apparent. Low and Medium average 85.4 and 75 FPS respectively, which are playable, but High drops to 62 FPS and Ultra falls to 51.9 FPS. For a smooth 4K experience, users would need to lower settings to Medium or Low.

FAQ

Q: What is the combo's rank in the benchmark database?

A: The AMD Ryzen 9 5950X + RTX 3060 Ti combination ranks 874 out of 1681 tested combos.

Q: How many cores and threads does the CPU have?

A: The Ryzen 9 5950X has 16 cores and 32 threads.

Q: What is the GPU's memory size and type?

A: The RTX 3060 Ti has 8 GB of GDDR6 memory.

Q: What is the average FPS at 1080p Ultra settings?

A: The average FPS at 1920x1080 with Ultra settings is 145.1.

Q: What is the CPU's boost clock speed?

A: The Ryzen 9 5950X boosts up to 4.90 GHz.

Q: What is the GPU's TDP?

A: The RTX 3060 Ti has a TDP of 200 W.