Dave The Diver

Dave The Diver

AVERAGE FPS
160
excellent

This combination delivers exceptional performance with an average of 160 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 87 99 111 132
1440p QHD 130 147 165 197
1080p Full HD 173 196 220 262

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 132
3840x2160 Medium 111
3840x2160 High 99
3840x2160 Ultra 87
2560x1440 Low 197
2560x1440 Medium 165
2560x1440 High 147
2560x1440 Ultra 130
1920x1080 Low 262
1920x1080 Medium 220
1920x1080 High 196
1920x1080 Ultra 173

Dave The Diver with Intel Core Ultra 5 235 + NVIDIA GeForce RTX 3070, In-Depth Analysis

Dave The Diver, an Adventure title from 2023, shows remarkable performance on the Intel Core Ultra 5 235 and NVIDIA GeForce RTX 3070 combination. The data indicates this pairing delivers exceptionally high frame rates across all tested configurations, with the system ranking in the 1184th position out of 2867 tested combos. Benchmark results show that even at the most demanding settings, this hardware keeps gameplay fluid, though the scaling patterns reveal a system that is primarily GPU-bound at higher resolutions and increasingly CPU-bound at 1080p.

Resolution Scaling

The measured FPS data reveals a clear and predictable scaling pattern as resolution increases from 1920x1080 to 3840x2160. At Ultra settings, the average frame rate drops from 173 FPS at 1080p to 130 FPS at 1440p, and finally to 87 FPS at 4K. This represents a 49.8% reduction in performance from 1080p to 4K, which is a substantial but expected decline for a high-resolution workload. The scaling from 1440p to 4K shows a 33.1% drop, indicating that the GPU is becoming the primary limiting factor as pixel count increases.

At High settings, the pattern continues with 196 FPS at 1080p, 147 FPS at 1440p, and 99 FPS at 4K. The percentage drop from 1080p to 4K here is 49.5%, nearly identical to the Ultra preset. This consistency across presets suggests that the resolution scaling is primarily driven by the GPU’s pixel throughput capabilities rather than specific settings interactions. The RTX 3070’s 8 GB of GDDR6 memory on a 256-bit bus, providing 448.0 GB/s of bandwidth, appears sufficient to handle the texture and geometry loads at all three resolutions without hitting a memory capacity wall.

The Low preset shows the most dramatic scaling, with 262 FPS at 1080p dropping to 197 FPS at 1440p and 132 FPS at 4K. The 1080p to 4K reduction here is 49.6%, again matching the other presets. This uniformity strongly indicates that the limiting component at 4K is the GPU, regardless of settings. At 1080p Low, the 262 FPS figure suggests the CPU is starting to become a factor, as the Core Ultra 5 235 with its 14 cores and 14 threads, boosting to 5.00 GHz, can only feed the GPU so many frames per second.

The Medium preset provides the only complete min/max data in the measurements. At 4K Medium, the average is 111 FPS with a minimum of 94 FPS and maximum of 127 FPS. At 1440p Medium, the average rises to 165 FPS with min/max of 140/190. The 1080p Medium shows 220 FPS average with 187/252 min/max. These ranges indicate that frame pacing is generally stable, with the gap between minimum and maximum FPS narrowing at higher resolutions, which is typical of GPU-bound scenarios.

What this scaling data says about the limiting component is straightforward: at 4K, the RTX 3070 is the bottleneck across all settings, as evidenced by the consistent ~50% FPS drop from 1080p. At 1080p, particularly on Low settings, the CPU’s capabilities become more relevant. The Core Ultra 5 235’s 24 MB of shared L3 cache and dual-channel DDR5 memory support at 102.4 GB/s bandwidth help maintain high minimum frame rates, but the sheer frame counts at 1080p approach what the processor can generate.

Settings Recommendations

The benchmark results point to Medium settings as the optimal balance between visual quality and performance for this hardware combination. At 4K Medium, the system delivers 111 FPS average, which is 24 FPS higher than Ultra’s 87 FPS and only 21 FPS lower than Low’s 132 FPS. The Medium preset at 4K also shows a narrow min/max range of 94-127 FPS, indicating consistent frame delivery. This makes Medium the clear choice for 4K gaming, as it captures most of the visual fidelity improvements over Low while maintaining a comfortable margin above 60 FPS.

At 1440p, the data suggests High settings provide the best experience. The High preset achieves 147 FPS average, which is only 18 FPS less than Low’s 197 FPS but 17 FPS more than Ultra’s 130 FPS. Given that High typically includes significant visual enhancements over Medium, and the 165 FPS Medium result is only 18 FPS higher, the trade-off favors High for the improved image quality. The 147 FPS average is well above any refresh rate concerns, making this the recommended configuration for 1440p displays.

For 1080p, Ultra settings are the clear recommendation. The 173 FPS average at Ultra is still exceptionally high, and the drop from Medium’s 220 FPS to Ultra’s 173 FPS is a 21.4% reduction that buys the maximum visual quality. Since even the most demanding preset stays above 170 FPS, there is no performance reason to compromise. Players with 144Hz or even 165Hz displays will be fully served by Ultra settings at 1080p.

It is notably Low settings at any resolution provide no practical benefit for this system. The lowest average FPS recorded across all configurations is 87 FPS at 4K Ultra, which is already well above the 60 FPS threshold for smooth gameplay. The only scenario where Low might be considered is if a user prioritizes absolute maximum frame rates for competitive play, but Dave The Diver is an Adventure game where such extremes are unnecessary. The data shows that Medium or High at 4K, High at 1440p, and Ultra at 1080p are the sensible choices.

CPU Role

The Intel Core Ultra 5 235’s specifications play a significant role in understanding the benchmark results. With 14 cores and 14 threads, this processor relies on a combination of performance and efficiency cores, though the fact pack does not break down the core types. The base clock of 3.40 GHz and boost clock of 5.00 GHz provide substantial single-thread headroom, which is critical for game logic and frame generation. The 14-thread configuration means there are no Hyper-Threading benefits, which could impact heavily threaded workloads, but Dave The Diver does not appear to be a multi-threaded extreme.

The CPU’s benchmark scores place it in the 89th percentile of all CPUs, with an average benchmark score of 46062. This is nearly identical to its nearest rivals: the AMD Ryzen AI 9 HX 375 scores 46030 (0.1% higher), the Intel Core i9-13900HX scores 46098 (0.1% higher), and the AMD EPYC 4364P scores 45970 (0.2% lower). These results indicate that the Core Ultra 5 235 is a mid-to-high-tier performer, but not a top-tier enthusiast chip. In the context of this game, the CPU’s role is to feed the RTX 3070 with enough frames to avoid becoming the bottleneck.

The PassMark single-thread score of 4516 and Cinebench R23 single-core score of 2085 show strong per-core performance. This is essential for games that rely on a primary game thread. The multi-thread results, such as Cinebench R23 multi-core at 14769 and PassMark multithread at 37816, demonstrate that the 14 cores can handle background tasks while gaming. However, the fact that the CPU’s benchmark scores are so close to its rivals suggests that the performance differences in Dave The Diver would be negligible, and the GPU is the dominant factor.

The relationship between the CPU and this game’s results becomes most apparent at 1080p Low, where the 262 FPS average is likely nearing the CPU’s frame generation limit. The 5.00 GHz boost clock helps maximize this ceiling, but the 24 MB of L3 cache and DDR5 memory bandwidth of 102.4 GB/s also contribute to keeping data flowing. At higher resolutions, the CPU’s influence diminishes, as evidenced by the consistent ~50% FPS drop from 1080p to 4K across all settings, which is a hallmark of GPU-limited scenarios.

FAQ

Q: What is the best resolution for this CPU/GPU combo in Dave The Diver?

A: All three tested resolutions—1080p, 1440p, and 4K—produce playable frame rates. At 4K Ultra, the average is 87 FPS, which is above the 60 FPS threshold. The data shows 4K is viable, but 1440p offers a better balance with a 147 FPS average at High settings.

Q: How does the Core Ultra 5 235 compare to its nearest CPU rivals?

A: The CPU’s average benchmark score is 46062, which is within 0.2% of its nearest rivals. The AMD Ryzen AI 9 HX 375 scores 46030 (0.1% higher), the Intel Core i9-13900HX scores 46098 (0.1% higher), and the AMD EPYC 4364P scores 45970 (0.2% lower). This means performance differences are practically negligible.

Q: Is the RTX 3070’s 8 GB VRAM sufficient for 4K gaming in this title?

A: Yes, the measured data shows 4K Ultra delivers 87 FPS average. The 8 GB of GDDR6 memory on a 256-bit bus with 448.0 GB/s bandwidth appears adequate for Dave The Diver’s requirements at 4K, as no memory-related performance drops are evident.

Q: What settings preset should I use at 1440p for the best experience?

A: High settings at 1440p provide 147 FPS average, which is only 18 FPS less than Low’s 197 FPS but 17 FPS more than Ultra’s 130 FPS. This makes High the recommended preset for the best balance of visual quality and performance.

Q: How does the RTX 3070 stack up against its nearest GPU rivals?

A: The GPU’s average benchmark score is 17208, placing it in the 61st percentile. The AMD Radeon RX 7600 XT scores 17083 (0.7% higher), the NVIDIA GeForce GTX 690 scores 17037 (1% higher), the AMD Radeon HD 7970M scores 17019 (1.1% higher), and the NVIDIA Tesla K40c scores 17468 (1.5% lower). The differences are small.

Q: Is the CPU or GPU the bottleneck at 1080p?

A: At 1080p Low, the 262 FPS average suggests the CPU is becoming a limiting factor, as the RTX 3070 is capable of higher frame rates at this resolution. At higher resolutions, the GPU becomes the clear bottleneck based on the consistent ~50% FPS drop from 1080p to 4K across all settings.

GPU Role

The NVIDIA GeForce RTX 3070, based on the GA104 chip with Ampere architecture, is the primary driver of Dave The Diver’s frame rates. Its 5888 shading units, 184 texture mapping units, and 96 raster output pipelines provide substantial raw compute power. The boost clock of 1725 MHz (base 1500 MHz) delivers an FP32 performance of 20.31 TFLOPS, which is more than sufficient for this Adventure title. The GPU’s average benchmark score of 17208 places it in the 61st percentile of all GPUs, indicating it is a solid mid-range performer.

The GPU’s nearest rivals show how closely matched this segment is: the AMD Radeon RX 7600 XT scores 17083 (0.7% higher), the NVIDIA GeForce GTX 690 scores 17037 (1% higher), the AMD Radeon HD 7970M scores 17019 (1.1% higher), and the NVIDIA Tesla K40c scores 17468 (1.5% lower). These small deltas mean that users of these competing cards would see nearly identical performance in this game. However, the RTX 3070’s 8 GB of GDDR6 memory and 448.0 GB/s bandwidth, combined with its 256-bit bus, give it an advantage in memory-intensive scenarios.

The GPU’s memory configuration is a key factor in the 4K results. The 8 GB capacity is sufficient for Dave The Diver, as evidenced by the playable 87 FPS at 4K Ultra. The memory clock of 1750 MHz (14 Gbps effective) and the 448.0 GB/s bandwidth ensure that texture streaming and high-resolution assets do not cause stuttering. The 96 ROPs handle pixel output efficiently, with a pixel rate of 165.6 GPixel/s, which directly contributes to the high frame rates at 4K.

The RTX 3070’s DirectX 12 Ultimate support (12_2) and Vulkan 1.4 API compatibility ensure it can handle modern rendering techniques. The 46 RT cores and 184 tensor cores provide ray tracing and DLSS capabilities, though the benchmark data does not indicate whether these features were enabled. The GPU’s 220 W TDP and dual-slot design make it a power-hungry but manageable component, with a suggested PSU of 550 W.

In the context of this game, the GPU’s role is dominant at 4K, where the frame rates are consistently 50% lower than at 1080p across all settings. This indicates that the RTX 3070’s compute and memory throughput are the limiting factors at high resolutions. At 1080p, the GPU is less stressed, and the CPU becomes more relevant. The PassMark G3D score of 22214 and 3DMark Steel Nomad DX12 score of 3162 confirm the GPU’s overall capability, which translates directly to the impressive frame rates measured in Dave The Diver.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates. Low settings produce an average of 262 FPS, which is the maximum measured across all configurations. Medium settings reduce this to 220 FPS, with a minimum of 187 FPS and maximum of 252 FPS. High settings achieve 196 FPS, and Ultra settings drop to 173 FPS. All 1080p presets are well above 144Hz refresh rates, making any settings choice viable, though Ultra provides the best visual experience without sacrificing fluidity.

At 2560x1440, the performance remains exceptionally high. Low settings average 197 FPS, Medium settings average 165 FPS with a range of 140-190 FPS, High settings average 147 FPS, and Ultra settings average 130 FPS. The 1440p results show a 24.8% drop from 1080p at Low settings, which is the largest relative decrease, but the absolute numbers are still excellent. The Medium preset’s min/max range of 140-190 FPS indicates consistent frame delivery.

At 3840x2160, the system still delivers playable frame rates across all presets. Low settings average 132 FPS, Medium settings average 111 FPS with a range of 94-127 FPS, High settings average 99 FPS, and Ultra settings average 87 FPS. The 4K results show a 49.6% average drop from 1080p across presets, confirming the GPU’s role as the limiting factor. Even at 4K Ultra, the 87 FPS average is above the 60 FPS threshold for smooth gameplay, meaning users can enjoy maximum visual quality without compromising playability.

The measured data shows a consistent pattern: each resolution step from 1080p to 1440p to 4K reduces frame rates by roughly 25% and then 33% respectively when comparing the same settings. The Medium preset, which has complete min/max data, shows that frame ranges tighten at higher resolutions, indicating more stable frame pacing when GPU-bound. The overall system performance, ranked 1184 out of 2867 combos, demonstrates that this pairing is well-suited for Dave The Diver, with no configuration falling below 87 FPS average.

Hardware Specifications

Intel Core Ultra 5 235

Cores / Threads 14 / 14
Base Clock 3400 MHz
Boost Clock 5000 MHz
TDP 65W
Socket Intel Socket 1851
View Full CPU Details →

NVIDIA GeForce RTX 3070

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 1725 MHz MHz
TDP 220 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 5 235 + NVIDIA GeForce RTX 3070 in Dave The Diver

Resolution Settings Avg FPS
3840x2160 Low 132.0
3840x2160 Medium 111.0
3840x2160 High 99.0
3840x2160 Ultra 87.0
2560x1440 Low 197.0
2560x1440 Medium 165.0
2560x1440 High 147.0
2560x1440 Ultra 130.0
1920x1080 Low 262.0
1920x1080 Medium 220.0
1920x1080 High 196.0
1920x1080 Ultra 173.0

Dave The Diver with iUltra 5 235 + Other GPUs

See how Dave The Diver performs with the same CPU but different graphics cards.

Dave The Diver with RTX 3070 + Other CPUs

See how Dave The Diver performs with the same GPU but different processors.

Other Games with iUltra 5 235 + RTX 3070

Explore FPS benchmarks for other games using this same hardware combination.