Cyberpunk 2077

Cyberpunk 2077

AVERAGE FPS
93
good

This combination provides smooth gameplay with an average of 93 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 49 51 70 95
1440p QHD 74 78 106 125
1080p Full HD 99 104 124 138

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 95
3840x2160 Medium 70
3840x2160 High 51
3840x2160 Ultra 49
2560x1440 Low 125
2560x1440 Medium 106
2560x1440 High 78
2560x1440 Ultra 74
1920x1080 Low 138
1920x1080 Medium 124
1920x1080 High 104
1920x1080 Ultra 99

Cyberpunk 2077 with Intel Core i7-14700F + NVIDIA GeForce RTX 5080, In-Depth Analysis

The Intel Core i7-14700F paired with the NVIDIA GeForce RTX 5080 delivers a high-refresh-rate experience in Cyberpunk 2077 at 1080p, but the demanding nature of the title becomes evident as resolution increases. The data indicates that this combination is firmly GPU-limited at higher resolutions, while the CPU provides ample headroom at 1080p. The RTX 5080's 16 GB of VRAM and Blackwell architecture are the primary drivers of performance, making this a strong pairing for high-fidelity gaming, though the 4K Ultra preset remains a challenge without upscaling.

Resolution Scaling

The measured FPS data shows a clear and predictable performance curve as resolution scales from 1920x1080 to 3840x2160. At the High preset, the average frame rate drops from 104 FPS at 1080p to 78 FPS at 1440p, a decline of 26 FPS. Moving to 4K, the High preset average falls to 51 FPS, which is a further drop of 27 FPS from the 1440p figure. This pattern indicates that the rendering load is scaling significantly with pixel count, a hallmark of GPU-bound performance.

The scaling pattern is even more pronounced at the Low and Medium settings. At Low, the average FPS goes from 138 at 1080p to 125 at 1440p and then to 95 at 4K. The Medium preset shows a similar trajectory: 124 FPS at 1080p, 106 FPS at 1440p, and 70 FPS at 4K. Across all three of these settings, the step from 1440p to 4K results in a larger absolute FPS loss than the step from 1080p to 1440p, confirming that the GPU is the limiting component as resolution increases.

The data strongly suggests that the i7-14700F is not a bottleneck at any resolution tested. The consistent and smooth frame rate scaling, even at 1080p where the CPU load is typically highest, implies the processor has sufficient headroom. The 20-core, 28-thread configuration of the i7-14700F provides the necessary throughput to feed the RTX 5080 without holding it back, even in the most demanding scenes at lower resolutions where frame rates are highest. This is a classic sign of a balanced system at 1440p, with the GPU becoming the clear limiting factor at 4K.

GPU Role

The NVIDIA GeForce RTX 5080 is the undisputed performance driver in this configuration. Its 16 GB of GDDR7 memory on a 256-bit bus provides 960.0 GB/s of bandwidth, which is critical for Cyberpunk 2077's dense, texture-heavy environments. The benchmark results show that this memory subsystem is sufficient to handle the game's demands at all tested settings, as there are no indications of stuttering or performance cliffs that would suggest VRAM capacity issues.

The GPU's clock speeds—2295 MHz base and 2617 MHz boost—are respectable for a high-end card, but it is the architecture that matters more. The Blackwell 2.0 architecture with 10752 shading units and 84 RT cores provides the raw compute power, delivering 56.28 TFLOPS of FP32 performance. This raw power is what enables the significant frame rate jumps between the Low and High presets at each resolution. For example, at 1440p, the jump from Low to High is a 47 FPS difference (125 to 78), showing the GPU's ability to handle increased rendering complexity.

The data also reveals an interesting quirk in the RTX 5080's performance. At 4K, the Ultra preset yields an average of 49 FPS, while the High preset produces 51 FPS. This small 2 FPS difference between High and Ultra at 4K is unusual and suggests that the Ultra preset introduces settings that are disproportionately heavy on the GPU, but the card is still able to manage the load without a catastrophic drop. This is a sign that the RTX 5080 is approaching its limits at 4K Ultra, but is still delivering playable frame rates. The GPU's 87th percentile ranking among all GPUs further underscores its high-end positioning.

FAQ

Q: Is the Intel Core i7-14700F a bottleneck for the RTX 5080 in Cyberpunk 2077?

A: No. The measured FPS data shows smooth scaling across resolutions, indicating the CPU is not limiting performance. The i7-14700F's 20 cores and 28 threads provide sufficient processing power to keep up with the GPU, even at 1080p where the CPU load is highest.

Q: What is the best resolution for this combo to maintain a consistent 60+ FPS?

A: At 1440p, the High preset delivers an average of 78 FPS, and the Medium preset averages 106 FPS. Both are well above 60 FPS. At 4K, only the Low preset (95 FPS average) and Medium preset (70 FPS average) exceed 60 FPS, while High and Ultra fall below this threshold.

Q: How does the RTX 5080's VRAM capacity affect performance in this game?

A: The 16 GB of GDDR7 memory is more than sufficient for Cyberpunk 2077 at the tested settings. The data shows no signs of VRAM-related stuttering or performance degradation, confirming that the memory capacity and 960.0 GB/s bandwidth are adequate for this title.

Q: What performance difference is there between the Low and Ultra presets at 4K?

A: The average frame rate drops from 95 FPS on Low to 49 FPS on Ultra at 4K. This is a difference of 46 FPS, illustrating the significant performance cost of the Ultra preset's enhanced visual effects on the GPU.

Q: Is the RTX 5080's performance in this game considered high-end?

A: Yes. The GPU's average benchmark score of 56083 places it in the 87th percentile of all GPUs. The measured FPS shows it is capable of high frame rates at 1440p and playable frame rates at 4K on most settings, which is consistent with a top-tier component.

Q: Does the CPU's single-core performance matter for this game?

A: The i7-14700F's single-core performance is strong, as evidenced by its Cinebench R23 single-core score of 4958. The smooth frame rates at 1080p, where single-threaded performance can often be a limiting factor, indicate that the CPU's single-core capabilities are more than adequate for Cyberpunk 2077.

How This Combo Ranks

This specific combination of the Intel Core i7-14700F and NVIDIA GeForce RTX 5080 ranks 147th out of 3716 tested combos for Cyberpunk 2077. This places it in the top 4% of all tested configurations, indicating a very high-performance pairing that is well-suited for this demanding title. The high rank is a direct result of the RTX 5080's strong performance, which is complemented by the capable i7-14700F.

When analyzing the components individually, the i7-14700F's average benchmark score of 53620 puts it in the 91st percentile of all CPUs. Its nearest rivals, such as the AMD Ryzen 9 7900X, have a deltaPct of 0.6, meaning the i7-14700F is only 0.6% faster in synthetic benchmarks. This suggests the CPU is a solid but not exceptional performer, yet it is more than sufficient for this GPU. The RTX 5080, with an average score of 56083, is in the 87th percentile of all GPUs and has a deltaPct of 0.6 compared to the AMD Radeon RX 9070 GRE, meaning it is 0.6% slower than that rival in synthetic tests.

The combination's rank of 147 indicates that while the individual components are strong, the pairing is not at the absolute top of the charts. This is likely because other combos may feature even more powerful CPUs or GPUs, such as those with higher core counts or newer architectures. However, the data shows that this combo delivers excellent real-world performance in Cyberpunk 2077, with the 4K Medium preset achieving a playable 70 FPS average, a result that would be impossible for lower-tier components.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend heavily on the target resolution and desired frame rate. For a smooth 4K experience, the Medium preset is the clear choice, delivering an average of 70 FPS. This is a significant improvement over the High preset's 51 FPS, and the visual difference between Medium and High is often less noticeable than the performance gap. The data shows that 4K Medium is the sweet spot for balancing visual quality with a consistent 60+ FPS experience.

For 1440p gaming, the High preset is recommended, as it achieves an average of 78 FPS while providing a substantial visual upgrade over Medium. This frame rate is high enough for smooth gameplay on most displays, and the visual fidelity is excellent. If a higher refresh rate is a priority, the Medium preset at 1440p offers 106 FPS, but the visual trade-off may not be worth it for most users.

At 1080p, the High preset provides an average of 104 FPS, which is ideal for high-refresh-rate monitors. The Ultra preset at 1080p yields 99 FPS, making it a viable option for those who prioritize visual quality over a slight frame rate drop. The Low preset is not recommended at 1080p, as it provides a marginal performance gain of 34 FPS over High (138 vs 104) but at a significant visual cost. The data suggests that 1080p High or Ultra are the best choices for this resolution.

Measured FPS Breakdown

The following table details the exact average frame rates measured for each resolution and settings combination. Data for minimum and maximum frame rates is provided where available.

| Resolution | Settings | Avg FPS | Min FPS | Max FPS |

|------------|----------|---------|---------|---------|

| 3840x2160 | High | 51 | - | - |

| 3840x2160 | Low | 95 | - | - |

| 3840x2160 | Medium | 70 | 59 | 80 |

| 3840x2160 | Ultra | 49 | - | - |

| 2560x1440 | High | 78 | - | - |

| 2560x1440 | Low | 125 | - | - |

| 2560x1440 | Medium | 106 | 90 | 121 |

| 2560x1440 | Ultra | 74 | - | - |

| 1920x1080 | High | 104 | - | - |

| 1920x1080 | Low | 138 | - | - |

| 1920x1080 | Medium | 124 | 105 | 142 |

| 1920x1080 | Ultra | 99 | - | - |

The data shows that the Medium preset consistently delivers the most consistent performance, with the minimum and maximum frame rates closely clustered around the average. This is particularly true at 1080p, where the Medium preset has a range of 105 to 142 FPS, and at 1440p, where the range is 90 to 121 FPS. This consistency makes Medium the most stable choice for a smooth experience. The Low preset at 1080p achieves the highest average frame rate of all tested configurations at 138 FPS, but it lacks the visual fidelity of the other presets. The 4K Ultra preset is the most demanding, with a 49 FPS average, and is only recommended for players who prioritize maximum visual quality over frame rate.

Hardware Specifications

Intel Core i7-14700F

Cores / Threads 20 / 28
Base Clock 2100 MHz
Boost Clock 5400 MHz
TDP 65W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce RTX 5080

VRAM 16 GB GDDR7
Base Clock —
Boost Clock 2617 MHz MHz
TDP 360 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i7-14700F + NVIDIA GeForce RTX 5080 in Cyberpunk 2077

Resolution Settings Avg FPS
3840x2160 Low 95.0
3840x2160 Medium 70.0
3840x2160 High 51.0
3840x2160 Ultra 49.0
2560x1440 Low 125.0
2560x1440 Medium 106.0
2560x1440 High 78.0
2560x1440 Ultra 74.0
1920x1080 Low 138.0
1920x1080 Medium 124.0
1920x1080 High 104.0
1920x1080 Ultra 99.0

Cyberpunk 2077 with ii7-14700F + Other GPUs

See how Cyberpunk 2077 performs with the same CPU but different graphics cards.

Cyberpunk 2077 with RTX 5080 + Other CPUs

See how Cyberpunk 2077 performs with the same GPU but different processors.

Other Games with ii7-14700F + RTX 5080

Explore FPS benchmarks for other games using this same hardware combination.