Control

Resolution Scaling

The measured frame rates for Control with the AMD Ryzen 5 7600 and NVIDIA GeForce RTX 5060 show a steep performance curve as resolution climbs, indicating that the GPU becomes the limiting factor well before 4K. At 1080p Low, the combo delivers 148.5 FPS, but dropping to 1440p Low reduces that to 110.6 FPS, a 25.5% performance loss. Moving from 1440p Low to 4K Low yields 72.8 FPS, another 34.2% reduction. This pattern is consistent across all settings presets, with the delta between 1080p and 4K widening as graphical load increases.

The scaling behavior reveals that the RTX 5060's 8 GB GDDR7 memory and 128-bit bus are the primary constraints at higher resolutions. At 1080p High, the system achieves 96.9 FPS, which is a strong result for a 2019 title, but the jump to 1440p High drops the average to 74.1 FPS. The 4K High result of 45.3 FPS is below the 60 FPS threshold that most users consider playable for an action-adventure game, though it remains smooth enough for slower exploration segments.

The gap between Low and Ultra settings at each resolution provides insight into the GPU's headroom. At 1080p, the spread is 65.7 FPS (148.5 Low vs. 82.8 Ultra), while at 1440p the spread narrows to 49.0 FPS (110.6 vs. 61.6). At 4K, the spread compresses further to 31.7 FPS (72.8 vs. 41.1). This compression indicates that at 4K, the GPU is already saturated at Low settings, leaving less room for additional graphical features before frame rates become marginal.

GPU Role

The NVIDIA GeForce RTX 5060 operates with a base clock of 2280 MHz and a boost clock of 2497 MHz, built on the Blackwell 2.0 architecture with a 5 nm process. The GPU's memory subsystem consists of 8 GB of GDDR7 on a 128-bit bus, providing 448.0 GB/s of bandwidth. This configuration yields a pixel rate of 119.9 GPixel/s and a texture rate of 299.6 GTexel/s, with FP32 compute rated at 19.18 TFLOPS.

Benchmark results place the RTX 5060 in the 73rd percentile among all GPUs, with an average benchmark score of 30109. Its nearest rival, the AMD Radeon RX 7700 XT, scores 30097, representing a 0% deltaPct — essentially a statistical tie. The NVIDIA Tesla M60 trails by 0.5%, while the RTX 5070 Mobile is just 0.6% ahead. These margins suggest that the RTX 5060 delivers performance right at the boundary of its competitive tier, and Control's measured results reflect this positioning.

The 8 GB VRAM capacity is sufficient for Control at 1080p and 1440p, where the game's textures and effects fit comfortably within memory limits. At 4K Ultra, the 41.1 FPS result indicates that the GPU is both bandwidth-limited and possibly VRAM-constrained, as the game's higher-resolution assets require more memory bandwidth than the 448.0 GB/s can sustain. The 30 RT cores and 120 tensor cores provide hardware support for ray tracing and DLSS features, though the measured FPS values in this dataset do not include such workloads.

How This Combo Ranks

The combination of the AMD Ryzen 5 7600 and NVIDIA GeForce RTX 5060 ranks 772nd out of 1636 tested combos in Control, placing it in the 47.2nd percentile of all system configurations. This mid-pack ranking reflects the balance between a capable 6-core CPU and a mid-range GPU that is adequate for 1080p and 1440p gaming but falls short of high-refresh 4K expectations.

The CPU component alone ranks in the 83rd percentile among all processors, with an average benchmark score of 26617. Its nearest rival, the AMD Ryzen 7 5800X3D, scores 26574 with a 0.2% deltaPct, while the Intel Core i9-12900HK is 0.2% behind. The Intel Core i9-11900K trails by 0.3%. The GPU's 73rd percentile ranking is lower, and the combo's overall position in Control reflects this GPU-limited scenario.

For a game released in 2019, this combo's rank suggests it is neither a top-tier 4K solution nor a low-end 1080p performer. The data indicates that the system is positioned to handle 1440p at medium-to-high settings comfortably, with 4K available only at reduced presets. The rank of 772 out of 1636 places it slightly below the median, which aligns with the GPU's mid-range classification and the CPU's above-average standing.

Measured FPS Breakdown

At 1920x1080, the system delivers its strongest results. Low settings produce 148.5 FPS, Medium yields 107.1 FPS, High achieves 96.9 FPS, and Ultra drops to 82.8 FPS. These figures show that the CPU and GPU combination is well-balanced at this resolution, with even Ultra settings providing a smooth experience above 80 FPS.

At 2560x1440, performance remains playable across all presets. Low settings produce 110.6 FPS, Medium delivers 81.8 FPS, High achieves 74.1 FPS, and Ultra drops to 61.6 FPS. The 1440p results demonstrate that the RTX 5060 can maintain 60+ FPS at Ultra, making this the highest resolution at which the system can fully utilize the game's graphical features without compromise.

At 3840x2160, the GPU becomes the clear bottleneck. Low settings produce 72.8 FPS, Medium delivers 55.6 FPS, High achieves 45.3 FPS, and Ultra drops to 41.1 FPS. Only the Low preset remains above 60 FPS at 4K, and the Ultra result is nearly half the 1080p Low figure. The 4K data suggests that users seeking a consistent 60 FPS experience at this resolution must accept Low settings, while those prioritizing visual fidelity will face frame rates in the 40-50 range.

FAQ

Q: Can this system run Control at 4K with playable frame rates?

A: Yes, but only at Low settings, where it achieves 72.8 FPS. Medium drops to 55.6 FPS, High to 45.3 FPS, and Ultra to 41.1 FPS. For a consistent 60 FPS at 4K, the Low preset is required.

Q: What is the best resolution for this combo in Control?

A: 1440p is the optimal resolution, as all presets remain above 60 FPS. Ultra delivers 61.6 FPS, while Low reaches 110.6 FPS, providing a wide range of playable options.

Q: How does the RTX 5060 compare to its nearest GPU rivals?

A: The RTX 5060 scores 30109 on average benchmarks, which is statistically identical to the AMD Radeon RX 7700 XT at 30097 (0% deltaPct). The NVIDIA Tesla M60 is 0.5% behind, while the RTX 5070 Mobile is 0.6% ahead.

Q: Is the Ryzen 5 7600 holding back the GPU in this game?

A: The data suggests no. At 1080p Low, the system reaches 148.5 FPS, indicating that the CPU can feed the GPU adequately. The performance drops at higher resolutions are consistent with GPU limitations rather than CPU bottlenecks.

Q: What settings should I use for 4K gaming on this system?

A: For 4K, Low settings are the only preset that exceeds 60 FPS (72.8 FPS). Medium provides 55.6 FPS, which may be acceptable for slower-paced gameplay, but High and Ultra fall below 46 FPS.

Q: How does this combo rank against all tested systems?

A: It ranks 772nd out of 1636 combos in Control, placing it slightly below the median of all tested configurations.

CPU Role

The AMD Ryzen 5 7600 provides 6 cores and 12 threads based on the Zen 4 architecture, with a base clock of 3.80 GHz and a boost clock of 5.10 GHz. The 65 W TDP and 32 MB of shared L3 cache are complemented by dual-channel DDR5 memory support with 83.2 GB/s bandwidth. The CPU's benchmark results show strong single-thread performance with a 3DMark single-thread score of 999 and a Cinebench R23 single-core score of 3246.

In multi-threaded workloads, the 7600 achieves a Cinebench R23 multicore score of 22992 and a PassMark multithread score of 27058. These figures place the CPU in the 83rd percentile among all processors, with an average benchmark score of 26617. The nearest rival, the AMD Ryzen 7 5800X3D, is just 0.2% ahead, while the Intel Core i9-12900HK is 0.2% behind — indicating that the 7600 sits at a performance inflection point among its peers.

For Control, the CPU's 6-core/12-thread configuration appears sufficient to avoid bottlenecking the RTX 5060. The 1080p results, where the system reaches 148.5 FPS at Low settings, demonstrate that the CPU can maintain high frame rates without limiting the GPU. The game's action-adventure genre typically relies on single-thread performance for game logic and physics, and the 7600's strong single-core scores support this workload effectively.

Settings Recommendations

The measured data provides clear guidance for optimizing the Control experience with this combo. At 1080p, the High preset at 96.9 FPS represents the best balance of visual quality and performance, as it offers a 17.0% improvement over Ultra while maintaining a substantial frame rate advantage. For users with 1440p displays, the Medium preset at 81.8 FPS is the recommended choice, as it delivers a significant performance margin over High (74.1 FPS) while retaining most graphical features.

At 4K, the Low preset at 72.8 FPS is the only viable option for smooth gameplay, but the drop in visual fidelity may not justify the resolution increase for many users. The Medium preset at 55.6 FPS could serve those who prioritize image quality over frame rate, though it falls below the 60 FPS threshold. The Ultra preset at 41.1 FPS is only recommended for screenshot purposes or gameplay that tolerates lower frame rates.

For the best overall experience, the data supports 1440p Medium as the sweet spot, providing 81.8 FPS while maintaining a playable experience across the game's varied environments. Users with high-refresh 1080p monitors can leverage the High preset to achieve 96.9 FPS, which is suitable for fast-paced combat sequences. The system's 8 GB VRAM is adequate for all presets at 1080p and 1440p, but 4K users should expect reduced texture quality at playable frame rates.