Control

Control

AVERAGE FPS
25
limited

This combination may struggle with this title, averaging 25 FPS. Consider upgrading hardware or significantly lowering settings.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 14 18 17 22
1440p QHD 21 24 26 34
1080p Full HD 26 27 30 43

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 22
3840x2160 High 18
3840x2160 Medium 17
3840x2160 Ultra 14
2560x1440 Low 34
2560x1440 Medium 26
2560x1440 High 24
2560x1440 Ultra 21
1920x1080 Low 43
1920x1080 Medium 30
1920x1080 High 27
1920x1080 Ultra 26

Control with AMD Ryzen 5 5600GT + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis

Control with the AMD Ryzen 5 5600GT and NVIDIA GeForce GTX 1050 Ti presents a dataset defined by severe GPU limitation. The measured frames per second across all resolutions and settings presets indicate that this combination, ranked 1618 out of 1636 tested combos in this game, is operating at the very bottom of the performance spectrum. The data shows a system where the graphics card is the overwhelming bottleneck, struggling to maintain playable frame rates even at the lowest settings and resolution.

Resolution Scaling

The performance degradation from 1920x1080 to 3840x2160 is stark and consistently demonstrates that the GPU is the limiting component. At High settings, the average frame rate drops from 27.2 FPS at 1080p to 24.1 FPS at 1440p, and finally to 17.9 FPS at 4K. This represents a decline of roughly 11% from 1080p to 1440p, and a further 26% drop from 1440p to 4K. The scaling pattern is not linear, indicating that the GPU's compute and memory resources are being exhausted at higher pixel counts.

Looking at Low settings, the scaling behavior reveals an even more pronounced GPU bottleneck. The average FPS at 1080p is 43.3, which falls to 33.6 at 1440p—a 22% reduction—and then plummets to 22.1 at 4K, a further 34% decline. The frame rate at 4K Low (22.1 FPS) is actually lower than the frame rate at 1080p High (27.2 FPS), which strongly suggests that the pixel fill rate and memory bandwidth of the GTX 1050 Ti are the primary constraints. The 4 GB of GDDR5 memory on a 128-bit bus, providing 112.1 GB/s of bandwidth, is insufficient for 4K rendering in this title.

The difference between High and Low settings at the same resolution is also telling. At 1080p, the gap between Low (43.3 FPS) and High (27.2 FPS) is 16.1 FPS, or about 37%. At 1440p, that gap narrows to 9.5 FPS (33.6 vs 24.1), and at 4K it shrinks to just 4.2 FPS (22.1 vs 17.9). This compression of performance difference at higher resolutions is a classic symptom of a GPU that is fully saturated; when the pixel workload becomes the dominant cost, reducing other settings like shadows and textures has diminishing returns.

How This Combo Ranks

The benchmark results place this combo at rank 1618 out of 1636 tested combinations, putting it in the bottom 1% of all systems tested for Control. This is a decisive indicator that this pairing is not suitable for the game under any tested configuration. The rank is not a reflection of the CPU, which performs adequately in synthetic tests, but rather a direct consequence of the GPU's low standing. The GTX 1050 Ti has an average benchmark score of 5316 and sits in the 30th percentile of all GPUs, and its nearest rivals in that scoring are the NVIDIA GeForce 930A (5317, 0% delta), the NVIDIA GeForce 940M (5297, 0.4% delta), and the AMD Radeon R7 240 (5280, 0.7% delta). These are all entry-level or mobile-class parts, confirming that the GPU is in the lowest performance tier.

In contrast, the Ryzen 5 5600GT has an average benchmark score of 20740 and is in the 78th percentile of all CPUs. Its nearest rivals are the Intel Core i7-10700 (20746, 0% delta) and the AMD Ryzen 5 5600X (20680, 0.3% delta), which are solid mid-range processors. The massive disparity between the CPU's percentile (78th) and the combo's ranking (1618th out of 1636) illustrates that the graphics card is holding the entire system back. The data suggests that pairing this CPU with a much stronger GPU would yield a dramatically better result, as the processor has ample headroom that is currently unused.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is the definitive performance limiter in this configuration. Its specifications paint a clear picture of constrained capabilities: it features 768 shading units, 48 texture mapping units, and 32 raster output units. The GPU operates at a base clock of 1291 MHz and a boost clock of 1392 MHz, with memory running at 1752 MHz (7 Gbps effective). The 4 GB of GDDR5 memory on a 128-bit bus yields a bandwidth of 112.1 GB/s, which is modest by modern standards. The GPU's FP32 performance is rated at 2.138 TFLOPS, and its pixel rate is 44.54 GPixel/s with a texture rate of 66.82 GTexel/s.

These specifications directly explain the measured frame rates. In Control, a game with heavy visual effects and complex environments, the GTX 1050 Ti struggles to maintain 30 FPS at any resolution. At 1080p Ultra, the average FPS is 26.3, and at 1080p High it is 27.2. The slight increase from Ultra to High suggests that the GPU is not just fill-rate limited but also compute limited, as reducing some settings has minimal impact. The synthetic benchmarks for the GPU also show its low standing: it scores 6340 in Passmark G3D and 2652 in Passmark GPU Compute, with a percentile rank of 30th among all GPUs.

The GPU's memory configuration is particularly detrimental at higher resolutions. At 4K, the average FPS ranges from 14.0 at Ultra to 22.1 at Low. The 4 GB VRAM capacity is likely exceeded at 4K, causing the GPU to fall back on slower memory handling, which exacerbates the already low bandwidth. The data shows that the GPU is not just slow; it is fundamentally mismatched for the demands of Control at anything above the lowest settings.

Measured FPS Breakdown

The measured FPS data provides a complete matrix of performance across resolutions and settings. At 1920x1080, the results are as follows: Low settings produce an average of 43.3 FPS, Medium produces 29.9 FPS, High produces 27.2 FPS, and Ultra produces 26.3 FPS. The jump from Low to Medium is a significant 13.4 FPS drop, indicating that Medium settings introduce a substantial workload increase. The difference between Medium, High, and Ultra is relatively small, with only a 3.6 FPS spread, suggesting that the GPU is already saturated at Medium and additional settings have diminishing returns.

At 2560x1440, the frame rates decline across the board. Low averages 33.6 FPS, Medium averages 26.0 FPS, High averages 24.1 FPS, and Ultra averages 21.2 FPS. The gap between Low and Ultra at this resolution is 12.4 FPS, which is proportionally larger than at 1080p, again highlighting the GPU's struggle with pixel count. None of these averages reach the 30 FPS threshold, making 1440p largely unplayable for a smooth experience.

At 3840x2160, the performance becomes marginal at best. Low averages 22.1 FPS, High averages 17.9 FPS, Medium averages 17.1 FPS, and Ultra averages 14.0 FPS. The spread between the lowest and highest settings is only 8.1 FPS, and even the best case (Low) is below the threshold for comfortable play. The data shows a consistent trend: as resolution increases, the absolute frame rates drop, and the relative difference between settings compresses, confirming that the GPU is the sole limiting factor.

Settings Recommendations

Based on the measured rows, the only configuration that approaches a playable frame rate is 1920x1080 with Low settings, which achieves 43.3 FPS. This is the only tested setting that exceeds 40 FPS, and it is the recommended choice for any user attempting to play this game with this hardware. Medium at 1080p provides 29.9 FPS, which is borderline but may be acceptable for slower-paced sections; however, the 13.4 FPS loss from Low is substantial for a visual upgrade that may not be worth the performance cost in a game with fast action and destructible environments.

Moving to 1440p or 4K is not advisable. Even at Low settings, 1440p averages 33.6 FPS, which is below the 60 FPS target and just barely above the 30 FPS minimum for playability. The 4K Low result of 22.1 FPS is too low for a responsive experience. The data suggests that users should stick to 1080p and prioritize frame rate over visual fidelity. The jump from Low to Medium at 1080p yields a 31% performance penalty, which is too steep given the GPU's limitations. Therefore, the optimal configuration is 1920x1080 with Low settings, as it provides the highest average FPS and the most headroom for demanding scenes.

For those who insist on higher settings, the data shows that High and Ultra at 1080p are nearly identical (27.2 vs 26.3 FPS), so there is no reason to choose Ultra over High if visual quality is a priority; the performance difference is negligible. However, neither is recommended as the primary setup.

CPU Role

The AMD Ryzen 5 5600GT plays a supporting role that is largely underutilized in this game. This CPU features 6 cores and 12 threads based on the Zen 3 architecture, with a base clock of 3.60 GHz and a boost clock of 4.60 GHz. It has a 16 MB L3 cache and supports DDR4 memory with a dual-channel bus, providing a memory bandwidth of 51.2 GB/s. The CPU's benchmarks are strong: it scores 17272 in Cinebench R23 multicore and 2438 in single-core, and it achieves a Geekbench multicore score of 7986 with a single-core score of 2035. Its Passmark multithread score is 20325, and it ranks in the 78th percentile of all CPUs.

Given the GPU's low frame rates, the CPU is never the bottleneck. At 1080p Low, where the game is most CPU-intensive relative to the GPU, the Ryzen 5 5600GT has more than enough headroom to feed the GTX 1050 Ti. The CPU's 12 threads are sufficient for Control's threading model, and its single-thread performance is more than adequate. The data shows no evidence of CPU limitation, as the frame rates scale with resolution and settings in a manner consistent with GPU-bound performance. In fact, the CPU is so much stronger than the GPU that it is effectively idle in many scenes, waiting for the graphics card to catch up.

The mismatch is clear when comparing the CPU's nearest rivals—the Intel Core i7-10700 and AMD Ryzen 5 5600X—which are both mid-to-high-end parts. The fact that this combo still ranks 1618th out of 1636 underscores that the CPU's capabilities are irrelevant to the final result. A user could swap in a much weaker CPU and see nearly identical frame rates in Control, as the GTX 1050 Ti will cap performance regardless. Conversely, upgrading the GPU while keeping this CPU would provide a massive uplift, as the processor is ready to handle a significantly faster graphics card. The data indicates that this CPU is a wasted resource in this pairing for this specific title.

Hardware Specifications

AMD Ryzen 5 5600GT

Cores / Threads 6 / 12
Base Clock 3600 MHz
Boost Clock 4600 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce GTX 1050 Ti

VRAM 4 GB GDDR5
Base Clock —
Boost Clock 1392 MHz MHz
TDP 75 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5600GT + NVIDIA GeForce GTX 1050 Ti in Control

Resolution Settings Avg FPS
3840x2160 Low 22.1
3840x2160 High 17.9
3840x2160 Medium 17.1
3840x2160 Ultra 14.0
2560x1440 Low 33.6
2560x1440 Medium 26.0
2560x1440 High 24.1
2560x1440 Ultra 21.2
1920x1080 Low 43.3
1920x1080 Medium 29.9
1920x1080 High 27.2
1920x1080 Ultra 26.3

Control with Ryzen 5 5600GT + Other GPUs

See how Control performs with the same CPU but different graphics cards.

Control with GTX 1050 Ti + Other CPUs

See how Control performs with the same GPU but different processors.

Other Games with Ryzen 5 5600GT + GTX 1050 Ti

Explore FPS benchmarks for other games using this same hardware combination.