Archeage

Archeage

AVERAGE FPS
99
good

This combination provides smooth gameplay with an average of 99 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 32 46 68 76
1440p QHD 55 81 119 134
1080p Full HD 82 120 177 198

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 76
3840x2160 Medium 68
3840x2160 High 46
3840x2160 Ultra 32
2560x1440 Low 134
2560x1440 Medium 119
2560x1440 High 81
2560x1440 Ultra 55
1920x1080 Low 198
1920x1080 Medium 177
1920x1080 High 120
1920x1080 Ultra 82

Archeage with Intel Core Ultra 5 225 + AMD Radeon RX 9070, In-Depth Analysis

The Intel Core Ultra 5 225 pairs a 10-core, 10-thread Arrow Lake design with a 3.30 GHz base clock and a 4.90 GHz boost clock. This configuration places it in the 85th percentile of all CPUs tested, with an average benchmark score of 36938. Its nearest rival, the AMD Ryzen 5 5600F, scores nearly identically at 36945, a delta of 0%, suggesting the two processors deliver essentially the same aggregate compute performance. The data also shows a slight edge over the AMD Ryzen 5 5500X3D, which trails by 0.2%, and the Intel Core i9-12900T, which is 0.5% behind. For a game like Archeage, an MMORPG from 2014, the single-thread performance is often the primary driver, and the Ultra 5 225’s Cinebench R23 single-core score of 3655 reflects a strong showing for that metric.

CPU Role — cores, clocks, and how they relate to this game's results

Archeage is an older MMORPG, and its engine tends to be sensitive to single-threaded performance rather than raw multi-core throughput. The Core Ultra 5 225’s 10 cores and 10 threads—with no hyper-threading—mean the operating system sees 10 logical processors. The boost clock of 4.90 GHz is the key figure here, as the game’s primary simulation and render threads will often run on one or two cores that can hit that ceiling. In synthetic tests, the CPU’s PassMark single-thread score is 4412, which is a strong indicator for this kind of workload. The multi-threaded PassMark score of 30459 shows the chip can handle background tasks, but the game’s performance scaling will be capped by how well the engine distributes work across those 10 threads.

Looking at the measured FPS data, the difference between the Low and High settings at 1080p is stark: 198 FPS at Low versus 120 FPS at High. This suggests that at Low settings, the CPU is feeding the GPU enough frames to reach a very high refresh rate, but the CPU is still the limiting factor. The fact that the Ultra preset drops to 82 FPS at 1080p indicates a significant increase in draw calls and object counts, which taxes the CPU’s single-thread capabilities. The L3 cache is 20 MB shared, which is ample for the game’s data sets, but the lack of extra threads (compared to a 16-thread chip) might cause minor hitches in crowded towns or large-scale PvP battles, even if the average FPS remains playable.

The CPU’s Cinebench R20 multi-core score of 6317 is modest, but the single-core score of 891 is more relevant. In the measured rows, the gap between Medium and High at 1440p is 38 FPS (119 vs 81), showing that the CPU’s ability to process game logic becomes more strained as the settings increase. The 10-core configuration is a balanced choice for a 2014 MMORPG, providing enough parallelism for modern OS overhead while maintaining high clock speeds for legacy code paths. The data implies that the Core Ultra 5 225 is not a bottleneck at 1080p Low (198 FPS), but it becomes the primary constraint at Ultra settings, where the frame rate nearly halves to 82 FPS, confirming the engine’s dependency on fast single-thread execution.

Settings Recommendations — which preset gives the best experience per the measured rows

The measured FPS rows provide a clear hierarchy, and the best experience depends on the target resolution. At 1080p, the Medium preset delivers 177 FPS on average, with a minimum of 150 FPS and a maximum of 203 FPS. This is a smooth, high-refresh-rate experience that avoids the frame-time spikes that could occur at Ultra (82 FPS). The High preset at 120 FPS is also excellent, but Medium offers a 57 FPS advantage over High while still looking substantially better than Low (198 FPS). For a 144Hz monitor, Medium is the sweet spot at 1080p, as it stays above the refresh rate nearly all the time.

Moving to 1440p, the Medium preset again stands out with an average of 119 FPS, a minimum of 101 FPS, and a maximum of 137 FPS. This is the only setting tested at 1440p that consistently stays above 100 FPS. High drops to 81 FPS, which is playable but not ideal for fast-paced combat, while Low at 134 FPS is faster but sacrifices visual fidelity. At 4K, the situation changes: Medium averages 68 FPS with a minimum of 58 FPS and a maximum of 78 FPS. This is the only 4K preset that maintains a frame rate above 60 FPS on average, making it the recommended choice for a 60Hz display. Ultra at 4K is unplayable at 32 FPS, and High at 46 FPS is borderline.

The data suggests that Medium is the universal recommendation across all three resolutions. It provides the best balance of visual quality and frame rate, with the 1440p Medium row showing the most consistent performance (101-137 FPS range). Low settings are only advisable for competitive play at 1080p, where the 198 FPS average can push high-refresh monitors, but the visual downgrade is significant. High is a compromise that works at 1080p (120 FPS) but becomes suboptimal at 1440p (81 FPS) and 4K (46 FPS). The Ultra preset is only viable at 1080p (82 FPS) for those who prioritize maximum eye candy over smoothness.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

Analyzing the frame rate scaling across resolutions at the Medium preset reveals the workload distribution. At 1080p Medium, the average FPS is 177. At 1440p Medium, it drops to 119 FPS, a reduction of 33%. At 4K Medium, it falls to 68 FPS, another 43% drop from 1440p. This scaling pattern is typical for a GPU-bound scenario at higher resolutions. However, the CPU’s role becomes evident when looking at the Low preset: 1080p Low yields 198 FPS, 1440p Low yields 134 FPS (a 32% drop), and 4K Low yields 76 FPS (a 43% drop from 1440p). The consistent percentage drops across Low and Medium suggest that the GPU is the primary limiter at all resolutions, but the CPU sets the ceiling at lower resolutions.

The data implies that at 1080p Low, the CPU can push 198 FPS, but the GPU cannot maintain that frame rate at 4K Low, where it drops to 76 FPS. This is a 62% reduction in FPS from 1080p to 4K, which is a larger drop than the 61% seen at Medium (177 to 68 FPS). The slightly larger drop at Low suggests that the GPU is working harder relative to the CPU at 4K Low, as the lower settings reduce CPU overhead, allowing the GPU to become the sole bottleneck. Conversely, at Ultra preset, the 1080p average is 82 FPS, and the 4K average is 32 FPS, a 61% drop, indicating that the CPU is still contributing to the bottleneck even at 4K Ultra, as the heavy draw calls limit the GPU’s ability to scale.

The frame rate drops suggest that the Core Ultra 5 225 is sufficient for the game’s CPU demands at 1080p and 1440p, as the FPS scaling aligns with the pixel count increase. However, at 4K, the GPU’s limits are exposed, and the RX 9070’s performance becomes the dominant factor. The 1440p Medium to 4K Medium drop of 43% is close to the theoretical 2.25x pixel increase, implying that the GPU is scaling near-ideally, and the CPU is not adding significant overhead. This indicates a balanced combo where the CPU is not severely limiting the GPU until Ultra settings, where the CPU’s single-thread performance becomes a constraint.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combo of the Intel Core Ultra 5 225 and AMD Radeon RX 9070 ranks 801st out of 2761 tested combinations in Archeage. This places it in the top 29% of all combos tested, which is a solid mid-to-upper tier ranking. The percentile position suggests that while this combination is not at the absolute top, it outperforms the majority of systems tested. The rank of 801 indicates that there are 800 other combos that achieve higher average frame rates in this specific game, which likely include more powerful CPUs or GPUs, or configurations with better optimization for Archeage’s engine.

The combo’s rank should be interpreted relative to the measured FPS. At 1080p Medium, the 177 FPS average is high, but many gaming-focused combos with top-tier CPUs might push past 200 FPS. The fact that this combo sits at 801 suggests that the CPU’s 10-thread limitation might hold back performance in certain scenarios, such as large-scale battles where multiple cores are engaged. However, the GPU’s 16 GB of VRAM and high bandwidth ensure that texture streaming is not an issue, which is crucial for an MMORPG with expansive environments.

The ranking also implies that the RX 9070 is not the bottleneck in most cases, as its performance percentile is 69th among all GPUs, while the CPU is in the 85th percentile. The combo rank is lower than either component’s individual percentile, which indicates that the pairing is slightly suboptimal for this specific game. This could be due to the CPU’s lack of multi-threading, as Archeage might not scale well across 10 threads, or it could be that the GPU’s raw power is not fully utilized at lower resolutions where the CPU is the limit. The data suggests that for this game, a CPU with higher single-thread performance might push this combo higher, but the current rank of 801 is respectable given the hardware’s price points.

GPU Role — VRAM, clocks, and how they relate to this game's results

The AMD Radeon RX 9070 features 16 GB of GDDR6 memory on a 256-bit bus, providing a bandwidth of 644.6 GB/s. This is a substantial amount of VRAM for a 2014 MMORPG, ensuring that even at 4K Ultra, texture data resides entirely in fast memory. The boost clock of 2520 MHz and the game clock of 2070 MHz are high for the RDNA 4 architecture, and the 3584 shading units provide a strong compute foundation. In synthetic benchmarks, the GPU scores 25381 in PassMark G3D, placing it in the 69th percentile. Its nearest rival, the NVIDIA GeForce GTX TITAN Z, scores 23736, a delta of 0.6%, meaning the RX 9070 is slightly ahead of that older flagship.

In the measured game data, the GPU’s role becomes evident at higher resolutions. At 4K Medium, the RX 9070 delivers 68 FPS, which is a playable experience, but at 4K Ultra, it drops to 32 FPS. This 36 FPS difference between Medium and Ultra at 4K highlights the GPU’s limitations with maxed-out settings, likely due to the heavy shading and post-processing effects in Archeage. The GPU’s 128 ROPs and 224 TMUs are sufficient for the game’s draw calls, but the pixel rate of 322.6 GPixel/s is a bottleneck at 4K Ultra, where the fill rate requirement exceeds the GPU’s capacity.

The GPU’s 16 GB VRAM is never a limiting factor in this game, as the highest measured FPS at any resolution is 198 FPS at 1080p Low, which would not stress the memory capacity. The bandwidth of 644.6 GB/s is more than enough to feed the GPU at 4K, as evidenced by the 76 FPS at 4K Low. The data shows that the GPU is the primary scaling component from 1080p to 4K, with the frame rates dropping consistently as resolution increases. The RX 9070’s performance at 1440p Medium (119 FPS) is strong, suggesting that the GPU is well-suited for high-refresh-rate gaming at that resolution, but the CPU’s limitations prevent it from reaching even higher frame rates at 1080p.

FAQ

Q: What is the best resolution for this combo in Archeage?

A: Based on the measured data, 1440p with Medium settings offers the best balance, delivering an average of 119 FPS with a minimum of 101 FPS and a maximum of 137 FPS, which is ideal for high-refresh monitors.

Q: Is the CPU or GPU the bottleneck at 1080p Ultra?

A: The data shows that at 1080p Ultra, the average FPS is 82, which is significantly lower than the 198 FPS at 1080p Low. This indicates that the CPU’s single-thread performance is the limiting factor, as the GPU has enough headroom to render more frames if the CPU could provide them.

Q: How does the GPU’s VRAM affect performance at 4K?

A: The 16 GB of VRAM is not a constraint in Archeage, as even at 4K Ultra, the average FPS is 32. The bottleneck is the GPU’s compute and fill rate, not memory capacity, as the 644.6 GB/s bandwidth is sufficient for the game’s textures.

Q: What is the combo’s rank among all tested systems?

A: The combo ranks 801st out of 2761 tested combinations, placing it in the top 29% of all systems tested for Archeage.

Q: Which settings preset offers the highest minimum FPS at 1080p?

A: The Medium preset at 1080p has a minimum FPS of 150, which is higher than the minimums for other presets, ensuring a smoother experience during frame drops.

Q: Does the CPU’s boost clock help in this game?

A: Yes, the 4.90 GHz boost clock is critical for Archeage’s single-threaded engine, as evidenced by the high FPS at Low settings (198 FPS at 1080p), which relies on fast single-core execution.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

At 1920x1080, the measured average FPS values are: Low at 198 FPS, Medium at 177 FPS (min 150, max 203), High at 120 FPS, and Ultra at 82 FPS. The data shows a clear degradation as settings increase, with the largest drop occurring between High and Ultra, a 38 FPS reduction. The Medium preset’s minimum of 150 FPS ensures that even in the most demanding scenes, the frame rate stays above 144 FPS, making it the most consistent choice for high-refresh displays.

At 2560x1440, the average FPS values are: Low at 134 FPS, Medium at 119 FPS (min 101, max 137), High at 81 FPS, and Ultra at 55 FPS. The drop from Low to Medium is only 15 FPS, indicating that the GPU can handle the increased resolution well, but the jump from Medium to High is 38 FPS, suggesting a significant increase in shading complexity. The Ultra preset at 55 FPS is barely above the 30 FPS playable threshold, but the Medium preset’s minimum of 101 FPS makes it the only viable option for competitive play at 1440p.

At 3840x2160, the average FPS values are: Low at 76 FPS, Medium at 68 FPS (min 58, max 78), High at 46 FPS, and Ultra at 32 FPS. The Medium preset is the only one that averages above 60 FPS, making it the recommended setting for 4K gaming. The High preset at 46 FPS is playable on a 60Hz monitor but may suffer from noticeable stutter, while Ultra at 32 FPS is below the standard playability threshold. The data indicates that the GPU’s performance at 4K is sufficient for Medium settings, but the CPU’s limitations at Ultra settings prevent higher frame rates, as the 4K Ultra average is only 10 FPS higher than the 1080p Ultra average of 32 FPS.

Hardware Specifications

Intel Core Ultra 5 225

Cores / Threads 10 / 10
Base Clock 3300 MHz
Boost Clock 4900 MHz
TDP 65W
Socket Intel Socket 1851
View Full CPU Details →

AMD Radeon RX 9070

VRAM 16 GB GDDR6
Base Clock —
Boost Clock 2520 MHz MHz
TDP 220 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 5 225 + AMD Radeon RX 9070 in Archeage

Resolution Settings Avg FPS
3840x2160 Low 76.0
3840x2160 Medium 68.0
3840x2160 High 46.0
3840x2160 Ultra 32.0
2560x1440 Low 134.0
2560x1440 Medium 119.0
2560x1440 High 81.0
2560x1440 Ultra 55.0
1920x1080 Low 198.0
1920x1080 Medium 177.0
1920x1080 High 120.0
1920x1080 Ultra 82.0

Archeage with iUltra 5 225 + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with RX 9070 + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with iUltra 5 225 + RX 9070

Explore FPS benchmarks for other games using this same hardware combination.