Archeage

The Intel Core i7-13700K paired with the NVIDIA GeForce RTX 4070 lands at rank 405 out of 1,727 tested combos in ArcheAge. That placement places this setup in the top 23% of all configurations tested, which is a strong standing for a game that launched in 2014 and relies on both CPU-heavy MMO logic and GPU rendering. The data indicates this combo is not at the very top, but it sits comfortably above the median, making it a balanced pick for players who want high refresh rates at common resolutions without chasing absolute flagship hardware.

How This Combo Ranks

The combo's rank of 405 out of 1,727 tested configurations puts it in the upper quartile of all pairings in this database. To contextualize, the CPU itself performs at the 93rd percentile against all processors, while the GPU sits at the 81st percentile against all graphics cards. The gap between those two percentiles suggests the RTX 4070 is the limiting factor in this pairing, but not by a dramatic margin. The measured FPS data supports this: at 1920x1080, the system delivers 130 FPS on High settings and 214.1 FPS on Low, which shows the GPU can push well past 144Hz territory at lower loads. However, at 3840x2160 Ultra, the frame rate drops to 33.1 FPS, revealing that 4K Ultra is beyond this combo's comfort zone. The rank reflects a system that excels at 1080p and handles 1440p well, but struggles to maintain playable rates at 4K with maxed settings.

GPU Role

The NVIDIA GeForce RTX 4070 brings 12 GB of GDDR6X memory on a 192-bit bus, delivering 504.2 GB/s of bandwidth. Its boost clock runs at 2475 MHz, and the card is built on the 5 nm Ada Lovelace architecture with 5,888 shading units. In ArcheAge, a title that does not heavily stress modern GPU features, the RTX 4070's raw rasterization power is what matters most. The data shows a clear pattern: at 1920x1080, the card produces 214.1 FPS on Low and 186.3 FPS on Medium, indicating that the GPU is not the bottleneck at these settings. Moving to 2560x1440, the card still delivers 143.5 FPS on Low and 126.9 FPS on Medium, which are excellent numbers for a competitive MMO. The 12 GB VRAM is more than sufficient for this game's textures, as evidenced by the fact that even at 4K High, the card manages 49.1 FPS without any reported frame drops. The GPU's 81st percentile ranking against all graphics cards aligns with its performance here: it is a capable mid-to-high-end card that handles this game's demands with headroom at most settings.

FAQ

Q: Can this combo run ArcheAge at 144Hz on a 1440p monitor?

A: Yes, but only at lower settings. At 2560x1440, the system achieves 143.5 FPS on Low and 126.9 FPS on Medium. High settings drop to 88.5 FPS, which is below 144Hz but still smooth.

Q: What is the best resolution for this pairing in ArcheAge?

A: The data shows 1920x1080 is the sweet spot. At this resolution, the combo delivers 130 FPS on High and 85 FPS on Ultra, both of which are playable. At 2560x1440, High produces 88.5 FPS, which is also good but not as consistently high.

Q: How does the CPU compare to its closest rivals?

A: The Intel Core i7-13700K has an average benchmark score of 47,282, which is effectively tied with the Intel Core i7-13700KF at 47,334 (a -0.1% delta) and the AMD EPYC 4364P at 47,131 (a +0.3% delta). It sits just 0.4% above the Intel Core i9-12900F's score of 47,081.

Q: Is the RTX 4070's 12 GB VRAM enough for ArcheAge?

A: Yes. The measured results show no VRAM-related performance issues even at 3840x2160 Ultra, where the card still produces 33.1 FPS. The game's textures and draw distances do not appear to exceed the 12 GB capacity.

Q: What GPU scores are closest to the RTX 4070?

A: The RTX 4070 has an average benchmark score of 37,283. Its nearest rival is the AMD Radeon RX Vega 56 at 37,507 (-0.6% delta), followed by the NVIDIA GeForce MX570 A at 38,008 (-1.9% delta) and the NVIDIA GeForce RTX 4080 Mobile at 38,135 (-2.2% delta).

Q: Should I use High or Ultra settings at 1080p?

A: The data suggests High is the better choice. At 1920x1080, High produces 130 FPS while Ultra drops to 85 FPS. The 45 FPS difference is significant, and for an MMORPG with frequent combat and large groups, the higher frame rate on High offers a smoother experience.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest results. Low settings produce 214.1 FPS, Medium hits 186.3 FPS, High reaches 130 FPS, and Ultra drops to 85 FPS. This resolution shows the RTX 4070 has ample headroom; even Ultra stays above 60 FPS, and Low easily clears 200 FPS for high-refresh-rate monitors.

Moving to 2560x1440, the numbers remain solid but show more strain. Low settings yield 143.5 FPS, Medium produces 126.9 FPS, High manages 88.5 FPS, and Ultra falls to 56.9 FPS. The jump from High to Ultra at this resolution costs over 31 FPS, which is a steep price for marginal visual gains. The 1440p results indicate that Medium or High is the practical ceiling for maintaining smooth gameplay.

At 3840x2160, the GPU starts to struggle. Low settings still deliver 82.7 FPS, which is playable, but Medium drops to 72.3 FPS, High falls to 49.1 FPS, and Ultra bottoms out at 33.1 FPS. The 4K results clearly show that this combo is not designed for maxed-out 4K gaming in ArcheAge. The drop from Low to Ultra at 4K costs nearly 50 FPS, and even High fails to reach 60 FPS.

Settings Recommendations

For players using a 1080p monitor, High settings at 130 FPS is the best balance of visual quality and performance. Ultra at 85 FPS is still playable, but the 45 FPS drop is noticeable in a fast-paced MMO, especially in crowded areas. Medium at 186.3 FPS is excessive for most displays unless running a 240Hz panel, making High the recommended preset.

At 2560x1440, Medium settings at 126.9 FPS offers the best experience. High at 88.5 FPS is also viable, but the drop to 56.9 FPS on Ultra is too severe for consistent gameplay. The data shows that Medium provides a 38 FPS advantage over High while maintaining a smooth frame rate, making it the optimal choice for 1440p.

For 4K, Low settings at 82.7 FPS is the only option that provides a consistently smooth experience. Medium at 72.3 FPS is acceptable, but High and Ultra fall below 50 FPS, which can lead to stutter in group combat. Players with 4K displays should stick to Low or Medium to keep frame rates in a comfortable range.

CPU Role

The Intel Core i7-13700K features 16 cores and 24 threads, with a base clock of 3.40 GHz and a boost clock of 5.40 GHz. It has 30 MB of shared L3 cache and supports both DDR4 and DDR5 memory. In ArcheAge, a game that manages many entities and player actions, the CPU's multithreaded performance is crucial. The benchmark data shows a Cinebench R23 multicore score of 39,000 and a single-core score of 5,505, indicating strong performance in both scenarios. The 3DMark max-threads score of 12,412 and single-thread score of 1,136 further confirm its capability. Against its nearest rivals, the 13700K is essentially tied with the 13700KF (-0.1% delta) and the AMD EPYC 4364P (+0.3% delta), showing that this CPU provides consistent performance relative to its peers. The CPU's 93rd percentile ranking among all processors supports its role in this combo: it provides ample headroom for the RTX 4070, ensuring that the GPU is the primary determinant of frame rates in most scenarios. The data shows that at 1080p Low, the system hits 214.1 FPS, which suggests the CPU can feed the GPU quickly enough to avoid bottlenecking even at high frame rates.