Archeage

Resolution Scaling

The measured FPS data for Archeage with the Intel Core i5-14600KF and AMD Radeon RX 6750 XT shows a clear pattern: performance scales significantly as resolution drops, but the shape of that scaling varies with the selected graphics preset. At Ultra settings, the average frame rate moves from 28.6 FPS at 4K (3840x2160) to 44 FPS at 1440p (2560x1440), and finally to 68.2 FPS at 1080p (1920x1080). That represents a 138% improvement from 4K to 1080p on the Ultra preset, which indicates that the GPU is the dominant limiting factor when every visual feature is enabled.

The Low preset tells a different story. At 4K Low, the system delivers 62 FPS; at 1440p Low, it jumps to 110 FPS; and at 1080p Low, it reaches 162.6 FPS. The jump from 4K to 1440p is a 77% increase, while the jump from 1440p to 1080p is a 48% increase. This non-linear scaling suggests that at lower settings, the CPU begins to play a more substantial role, particularly at 1080p where the frame rate is high enough that per-frame CPU work becomes more relevant. The gap between 1440p Low (110 FPS) and 1080p Low (162.6 FPS) is smaller in relative terms than the gap between 4K Low (62 FPS) and 1440p Low (110 FPS), hinting that the Core i5-14600KF is approaching its practical ceiling for this game at lower resolutions.

Medium settings show a similar pattern: 52.4 FPS at 4K, 94.3 FPS at 1440p, and 143.7 FPS at 1080p. The High preset produces 41 FPS at 4K, 65.4 FPS at 1440p, and 99.2 FPS at 1080p. Across all presets, the largest absolute gains come from moving from 4K to 1440p, while the move from 1440p to 1080p yields smaller absolute but still meaningful improvements. This indicates that 4K is heavily GPU-bound for this combination, with the RX 6750 XT's 12 GB of GDDR6 memory and 432.0 GB/s bandwidth being taxed by the pixel count, whereas 1080p allows the CPU's single-thread strength to surface.

The data also reveals that the gap between presets narrows at higher resolutions. At 4K, the difference between Low (62 FPS) and Ultra (28.6 FPS) is 33.4 FPS. At 1080p, the difference between Low (162.6 FPS) and Ultra (68.2 FPS) is 94.4 FPS. This widening gap at lower resolutions reinforces that the GPU is the primary constraint at 4K, while at 1080p, the CPU's capability to feed frames becomes more apparent, allowing the preset selection to have a larger impact on the final frame rate.

CPU Role

The Intel Core i5-14600KF brings 14 cores and 20 threads to this benchmark, with a base clock of 3.50 GHz and a boost clock of 5.30 GHz. The processor belongs to the Raptor Lake-R architecture, built on Intel's 10 nm process, and it carries 24 MB of shared L3 cache. In synthetic benchmarks, the CPU achieves a Cinebench R23 multi-core score of 32889 and a single-core score of 4643, with a Geekbench single-core score of 2778. These numbers place the chip in the 93rd percentile among all CPUs tested, according to the database.

For Archeage, an MMORPG that launched in 2014, the CPU's single-thread performance is particularly relevant. The game's engine tends to rely on a limited number of threads for core simulation and rendering tasks, which means the 5.30 GHz boost clock and strong single-core scores are more indicative of real-world performance than the raw multi-core throughput. The measured FPS data supports this: at 1080p Low, the system hits 162.6 FPS, which is well above the 1440p Low result of 110 FPS. If the GPU were the only limiting factor, the 1080p result would scale more predictably from the 1440p number, but the smaller relative gain (48% versus 77% from 4K to 1440p) suggests the CPU is starting to cap the frame rate.

The CPU's nearest rivals in the database are the Intel Core i5-14600K (0.4% ahead), the AMD EPYC 4345P (0.5% behind), the AMD Ryzen 9 5950X (0.6% ahead), and the Intel Xeon Gold 5318H (1.4% ahead) in average benchmark score. These are all close competitors, which means the i5-14600KF's performance in this game is unlikely to be a bottleneck relative to other high-end desktop parts. However, the data shows that even with this capable CPU, the Ultra preset at 1080p only reaches 68.2 FPS, which is a significant drop from the Low preset's 162.6 FPS. This indicates that the GPU's 13.31 TFLOPS of FP32 compute and 160 TMUs are the limiting factor when all settings are maxed out, rather than the CPU.

The processor's 125 W TDP and support for DDR4 and DDR5 memory suggest it is designed for high-performance desktop builds, but the benchmark results in Archeage show that its role shifts depending on the settings. At 4K Ultra, the CPU is likely underutilized as the GPU struggles to maintain 28.6 FPS. At 1080p Low, the CPU's single-thread speed becomes more critical, and the data indicates it can support frame rates above 160 FPS in this scenario.

FAQ

Q: What is the best resolution for this CPU and GPU combo in Archeage?

A: The data shows that 1440p Medium delivers 94.3 FPS, which is a strong balance between visual quality and smoothness. At 1440p High, the average drops to 65.4 FPS, still playable but less fluid. 1080p Medium reaches 143.7 FPS, but the visual fidelity at 1440p is generally preferred for an MMORPG.

Q: How does the Ultra preset compare to High at the same resolution?

A: At 1080p, Ultra averages 68.2 FPS versus 99.2 FPS on High, a 31 FPS difference. At 1440p, Ultra averages 44 FPS versus 65.4 FPS on High, a 21.4 FPS difference. At 4K, Ultra averages 28.6 FPS versus 41 FPS on High, a 12.4 FPS difference. The Ultra preset imposes a consistent penalty across resolutions.

Q: Is the RX 6750 XT sufficient for 4K gaming in Archeage?

A: The data indicates that 4K is playable only on Low settings, where the average FPS is 62. At 4K Medium, it drops to 52.4 FPS, and at 4K High, it falls to 41 FPS. For 4K Ultra, the average is 28.6 FPS, which is below typical playability thresholds.

Q: Does the CPU limit performance at 1080p?

A: The evidence suggests some CPU limitation at 1080p Low, where the frame rate reaches 162.6 FPS. The jump from 1440p Low (110 FPS) to 1080p Low (162.6 FPS) is 48%, which is smaller than the 77% jump from 4K Low (62 FPS) to 1440p Low. This compression indicates the CPU is nearing its limit.

Q: What is the difference between Low and Medium settings at 1440p?

A: At 1440p, Low averages 110 FPS while Medium averages 94.3 FPS, a difference of 15.7 FPS. The Medium preset likely adds visual features that cost some performance but still remain above 90 FPS.

Q: How does this combo rank among all tested combinations?

A: The combo ranks 849 out of 1727 tested combos for Archeage, placing it in the middle of the pack. This rank reflects the balance of the i5-14600KF and RX 6750 XT, which is neither top-tier nor entry-level for this title.

How This Combo Ranks

The Intel Core i5-14600KF paired with the AMD Radeon RX 6750 XT ranks 849 out of 1727 tested combos in Archeage. This places it slightly below the median of all tested systems, which is a notable finding given the individual components' standings. The CPU alone sits in the 93rd percentile of all CPUs, and the GPU sits in the 79th percentile of all GPUs, but the combination for this specific game yields a mid-pack ranking.

This discrepancy suggests that Archeage's performance profile does not fully utilize the strengths of either component. The game's age, having released in 2014, means it likely does not scale well with modern multi-core CPUs or take full advantage of newer GPU features. The RX 6750 XT's 40 ray tracing cores and DirectX 12 Ultimate support are largely irrelevant for this title, and the CPU's 14 cores are probably underutilized. The rank of 849 out of 1727 implies that many other combinations, potentially with older or less powerful parts, achieve similar or better frame rates in this specific workload.

The nearest rivals for the CPU include the Intel Core i5-14600K (0.4% ahead in average score) and the AMD Ryzen 9 5950X (0.6% ahead), while the GPU's nearest rivals include the AMD Radeon RX 5600M (0.2% ahead) and the NVIDIA GeForce RTX 3080 (1.3% behind). These deltas are small, which means the combo's mid-pack ranking is not due to a weak component but rather to the game's idiosyncrasies. In other titles, this same combination might rank much higher, but in Archeage, the measured data shows it lands near the middle of the field.

Measured FPS Breakdown

At 4K (3840x2160), the measured average FPS values are as follows: Low settings produce 62 FPS, Medium produces 52.4 FPS, High produces 41 FPS, and Ultra produces 28.6 FPS. This represents a full range of 33.4 FPS between the lowest and highest presets. None of these 4K results reach 60 FPS except for the Low preset, which barely exceeds that threshold at 62 FPS.

At 1440p (2560x1440), the results improve substantially. Low settings average 110 FPS, Medium averages 94.3 FPS, High averages 65.4 FPS, and Ultra averages 44 FPS. The range here is 66 FPS between Low and Ultra. The Low and Medium presets both exceed 90 FPS, while High stays above 60 FPS. Only Ultra falls below the 60 FPS threshold.

At 1080p (1920x1080), the data shows the highest frame rates. Low settings reach 162.6 FPS, Medium averages 143.7 FPS, High averages 99.2 FPS, and Ultra averages 68.2 FPS. The range is 94.4 FPS between Low and Ultra. Every preset except Ultra exceeds 90 FPS, and the Low preset is well above 144 Hz, which would suit a high-refresh-rate monitor.

The progression across resolutions for each preset is consistent: Low always delivers the highest FPS, followed by Medium, then High, with Ultra last. The relative gaps between presets grow as resolution decreases, confirming that the GPU becomes more of a bottleneck at higher resolutions while the CPU's contribution increases at lower resolutions.

Settings Recommendations

Based on the measured FPS data, the optimal preset for this combo in Archeage depends on the target resolution and desired frame rate. For 4K users, the Low preset is the only option that stays above 60 FPS, averaging 62 FPS. The Medium preset at 52.4 FPS is borderline playable but may feel less smooth during heavy combat scenarios common in MMORPGs. The High and Ultra presets at 41 FPS and 28.6 FPS, respectively, are not recommended for 4K given the data.

For 1440p, the Medium preset offers the best balance, delivering 94.3 FPS with presumably improved visuals over Low. The High preset at 65.4 FPS is also acceptable for players who prioritize visual fidelity over maximum frame rate, but the Ultra preset at 44 FPS is too low for consistent smoothness. The Low preset at 110 FPS is the best choice for competitive play or for users with high-refresh-rate 1440p monitors, though it sacrifices visual quality.

For 1080p, the Medium preset is the standout recommendation, achieving 143.7 FPS while likely providing a substantial visual upgrade over Low. The High preset at 99.2 FPS is also excellent for players who want a richer visual experience without dropping below 90 FPS. The Ultra preset at 68.2 FPS is playable but represents a significant performance cost for marginal visual gains over High. The Low preset at 162.6 FPS is ideal for esports-style play or for maximizing frame rate on a 144 Hz or 165 Hz monitor.

In summary, the data suggests that Medium settings provide the best overall experience at both 1440p and 1080p, while Low is the only viable preset at 4K. Players who prefer higher visual fidelity should choose High at 1080p or 1440p, but should avoid Ultra at any resolution unless they are willing to accept frame rates below 70 FPS.