Downfall
This combination provides smooth gameplay with an average of 100 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 36 | 57 | 70 | 85 |
| 1440p QHD | 57 | 92 | 112 | 137 |
| 1080p Full HD | 80 | 129 | 157 | 192 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Downfall with Intel Core i5-13400F + AMD Radeon RX 7600, In-Depth Analysis
The Intel Core i5-13400F paired with the AMD Radeon RX 7600 delivers a highly playable experience in Downfall, but the data reveals a system that is clearly balanced around 1080p and 1440p gaming rather than 4K. The measured frames per second (FPS) show a steep performance cliff as resolution increases, with the gap between settings narrowing at higher resolutions, indicating where the bottleneck shifts.
Resolution Scaling
The FPS drop from 1080p to 4K is dramatic and tells a clear story about the limiting component. At Low settings, the average frame rate falls from 192 FPS at 1920x1080 to 137 FPS at 2560x1440, and then to 85 FPS at 3840x2160. This represents a 29% reduction from 1080p to 1440p, and a further 38% reduction from 1440p to 4K. The scaling is not linear; the penalty for moving to 4K is disproportionately large, which is a classic sign that the GPU is becoming the primary constraint.
The High settings row tells a similar story. The average FPS drops from 129 at 1080p to 92 at 1440p (a 29% drop), then to 57 at 4K (a 38% drop from 1440p). This consistent pattern across Low and High presets confirms that the Radeon RX 7600’s rendering capabilities are the limiting factor at higher resolutions. The CPU has enough headroom to feed the GPU at 1080p, but as pixel count increases, the GPU’s workload grows faster than the CPU’s, shifting the bottleneck.
Interestingly, the gap between Low and High settings shrinks as resolution rises. At 1080p, the difference between Low (192 FPS) and High (129 FPS) is 63 FPS. At 1440p, that gap narrows to 45 FPS (137 vs 92). At 4K, the gap is just 28 FPS (85 vs 57). This compression indicates that at 4K, the GPU is so saturated that raising settings from Low to High has less impact on the final frame rate because the pixel fill rate dominates the cost. The data suggests that 4K gaming with this combo is only viable at Low settings, where 85 FPS is still smooth, but anything above Medium will dip below the 60 FPS threshold.
GPU Role
The AMD Radeon RX 7600 is built on the RDNA 3.0 architecture with a Navi 33 chip, and its 8 GB of GDDR6 memory on a 128-bit bus provides 288.0 GB/s of bandwidth. The GPU’s boost clock is rated at 2655 MHz, with a game clock of 2250 MHz, and it offers 2048 shading units. In the benchmark database, the RX 7600 scores 16634 in Passmark G3D and 88051 in Geekbench OpenCL, placing it in the 57th percentile of all GPUs. Its average benchmark score of 15171 puts it within 0.2% of the NVIDIA GeForce RTX 3050 OEM (15199), effectively a tie, and 0.7% ahead of the AMD Radeon Pro 560X (15063).
The GPU’s role in Downfall is clearly dominant at 4K. At Ultra settings, the combo only manages 36 FPS at 3840x2160, which is barely above a slideshow. The 8 GB VRAM capacity is likely a factor here, as Downfall is a horror title from 2016 that may not be heavily optimized for modern high-resolution textures. The 288.0 GB/s bandwidth is sufficient for 1080p and 1440p, as evidenced by the strong frame rates, but the 4K Ultra result of 36 FPS suggests the GPU is running out of memory bandwidth or raw compute headroom. The Passmark DirectX 12 score of 58 and DirectX 11 score of 172 indicate solid API support, but the raw throughput is limited.
At 1080p Medium, the combo hits 157 FPS with a minimum of 133 FPS, showing that the GPU has plenty of headroom when the pixel count is low. The 1440p Medium result of 112 FPS with a 95 FPS minimum is also excellent. The data indicates that the RX 7600 is a capable 1080p and 1440p card for this game, but its 4K performance is only acceptable on Low settings (85 FPS). The 57th percentile ranking versus all GPUs underscores that this is a mid-range part, and the measured results align with that positioning.
CPU Role
The Intel Core i5-13400F is a 10-core, 16-thread processor from the Raptor Lake-S architecture, with a base clock of 2.50 GHz and a boost clock of 4.60 GHz. It features 20 MB of shared L3 cache and supports DDR4 and DDR5 memory. In synthetic benchmarks, the CPU scores 22604 in Cinebench R23 multicore and 3191 in single-core, with a Passmark multithread score of 25032. It ranks in the 77th percentile of all CPUs, and its average benchmark score of 25292 is within 0.3% of the AMD Ryzen 9 6900HS (25284) and 0.4% ahead of the AMD Ryzen 7 6800H (25201).
The CPU’s role in Downfall is secondary to the GPU at higher resolutions, but it becomes more relevant at 1080p. At 1080p Low, the combo achieves 192 FPS, which is a high frame rate that requires a capable CPU to feed the GPU. The single-core performance, as measured by the 960 score in 3DMark single-thread, is strong enough to avoid bottlenecking the RX 7600 at 1080p. However, the data shows that the FPS ceiling at 1080p Low (192) is not limited by the CPU, as the GPU is still able to push well beyond 144 FPS.
At 1440p and 4K, the CPU’s workload does not scale with resolution, so the 13400F remains largely idle. The 16 threads provide ample parallelism for the game’s engine, which is a horror title from 2016 that likely does not use more than a few cores. The 65W TDP is modest, and the 10-core configuration ensures that background tasks do not interfere with frame pacing. The benchmark results indicate that this CPU has more than enough headroom for Downfall, and the limiting factor at 4K is unambiguously the GPU. The deltaPct against rivals shows a near-tie with the Ryzen 9 6900HS (0% delta), confirming that the 13400F is a solid mid-range performer that will not hold back the RX 7600 in this title.
How This Combo Ranks
The Intel Core i5-13400F and AMD Radeon RX 7600 combination ranks 2566 out of 3716 tested combos in Downfall, placing it in the 31st percentile of all tested systems. This ranking reflects the GPU’s mid-range positioning (57th percentile) more than the CPU’s (77th percentile), which confirms that the graphics card is the limiting factor in this pairing. The combo rank is lower than the individual component percentiles might suggest, which indicates that other systems with weaker CPUs but stronger GPUs are achieving better frame rates in this game.
The rank of 2566 out of 3716 means there are 1150 combos that perform worse, but a significant 2565 that perform better. This is not a top-tier gaming rig by any means, but the measured FPS data shows it is far from a weak one. At 1080p High, the combo delivers 129 FPS, which is above the 120 FPS threshold for high-refresh-rate monitors. At 1440p High, it hits 92 FPS, which is still smooth for most players. The 4K Low result of 85 FPS is respectable, but the 4K Ultra result of 36 FPS drags down the overall ranking.
The ranking suggests that this combo is best suited for 1080p or 1440p gaming, where it performs well above average. The data shows a clear sweet spot at 1440p Medium (112 FPS) and 1080p Ultra (80 FPS), both of which offer a good balance of visual quality and performance. The combo’s position in the bottom 31% of tested systems is likely due to the prevalence of higher-end GPUs in the database, not because the RX 7600 is inadequate for Downfall specifically.
Settings Recommendations
Based on the measured FPS rows, the best experience for this combo depends on the target resolution and refresh rate. At 1920x1080, the Medium preset delivers 157 FPS with a minimum of 133 FPS, which is an excellent choice for high-refresh-rate displays. The High preset at 129 FPS is also viable, but Medium offers a 22% performance boost with minimal visual difference in a horror game where atmosphere matters more than fine detail. The Ultra preset at 80 FPS is playable but not ideal for fast-paced scenes, and the drop from Medium to Ultra is a 49% performance loss.
At 2560x1440, the Medium preset is the clear winner, delivering 112 FPS with a minimum of 95 FPS. This is above the 90 FPS threshold for smooth gameplay and provides a comfortable margin above the 60 FPS minimum. The High preset at 92 FPS is also acceptable, but Medium offers a 22% improvement over High, making it the better trade-off. The Ultra preset at 57 FPS is just below the 60 FPS standard and should be avoided unless the player values visual fidelity over frame rate.
At 3840x2160, the Low preset is the only sensible option, delivering 85 FPS. The Medium preset drops to 70 FPS with a minimum of 59 FPS, which is borderline, and the High preset at 57 FPS is too close to the minimum playable threshold. The Ultra preset at 36 FPS is unplayable and should be ignored. For 4K, the data strongly recommends Low settings to maintain a smooth experience. The 1440p Medium preset offers the best overall balance for most players, with 112 FPS and a minimum of 95 FPS, providing both quality and performance.
FAQ
*Q: Can this combo run Downfall at 4K 60 FPS?*
A: No. The measured data shows that at 3840x2160, the High preset delivers 57 FPS and Medium delivers 70 FPS, but Ultra drops to 36 FPS. Only the Low preset at 85 FPS exceeds 60 FPS, so 4K 60 FPS requires Low settings.
Q: What is the best resolution for this setup?
A: The data indicates that 2560x1440 on Medium settings is the sweet spot, with an average FPS of 112 and a minimum of 95. This provides a high frame rate with better visual quality than 1080p.
Q: How does the RX 7600 compare to its nearest rival in this game?
A: The GPU’s average benchmark score of 15171 is 0.2% lower than the NVIDIA GeForce RTX 3050 OEM (15199), but 0.6% higher than the AMD Radeon Pro 560X (15082). In Downfall, the measured FPS shows it is a capable 1080p/1440p card.
Q: Is the i5-13400F a bottleneck for the RX 7600?
A: No. The CPU ranks in the 77th percentile of all CPUs, and its average score of 25292 is nearly identical to the AMD Ryzen 9 6900HS (25284, 0% delta). The FPS data shows the GPU is the limiting factor at higher resolutions.
Q: What settings should I use for 1080p gaming?
A: The Medium preset at 1920x1080 delivers 157 FPS with a minimum of 133 FPS, which is the best balance. The High preset at 129 FPS is also good, but Medium offers a significant performance advantage.
Q: Why does performance drop so much at 4K?
A: The 4K resolution increases the pixel count by 4x compared to 1080p, which heavily taxes the GPU’s 8 GB VRAM and 288.0 GB/s bandwidth. The data shows a 38% FPS drop from 1440p to 4K, confirming the GPU is the bottleneck.
Hardware Specifications
Intel Core i5-13400F
AMD Radeon RX 7600
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-13400F + AMD Radeon RX 7600 in Downfall
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 85.0 |
| 3840x2160 | Medium | 70.0 |
| 3840x2160 | High | 57.0 |
| 3840x2160 | Ultra | 36.0 |
| 2560x1440 | Low | 137.0 |
| 2560x1440 | Medium | 112.0 |
| 2560x1440 | High | 92.0 |
| 2560x1440 | Ultra | 57.0 |
| 1920x1080 | Low | 192.0 |
| 1920x1080 | Medium | 157.0 |
| 1920x1080 | High | 129.0 |
| 1920x1080 | Ultra | 80.0 |
Downfall with ii5-13400F + Other GPUs
See how Downfall performs with the same CPU but different graphics cards.
Downfall with RX 7600 + Other CPUs
See how Downfall performs with the same GPU but different processors.
Other Games with ii5-13400F + RX 7600
Explore FPS benchmarks for other games using this same hardware combination.