Archeage

The Intel Core i5-10400F and NVIDIA GeForce RTX 3070 combination places in the 799th position out of 1727 tested combos for Archeage, a mid-pack result that reflects a pairing of a capable but not top-tier CPU with a strong mainstream GPU. This ranking—roughly the 46th percentile—suggests the combo is competitive in the broader database, but the benchmark results reveal that the experience is highly sensitive to settings and resolution, with the GPU often being the primary constraint at higher loads.

How This Combo Ranks

The combo’s rank of 799 out of 1727 places it squarely in the middle of the field, indicating a balanced yet unexceptional standing for this MMORPG. The RTX 3070, which sits in the 72nd percentile among all GPUs, is the stronger component; its nearest rivals include the AMD Radeon RX 6600 XT (0.9% higher average score) and the NVIDIA GeForce GTX 980 Ti (1% higher), showing the card is closely matched with those alternatives in synthetic tests. The i5-10400F, in the 73rd percentile among CPUs, is similarly positioned, with rivals like the AMD Ryzen 3 7320C (0.8% lower) and Intel Core i5-8500 (1.1% lower) indicating tight competition at this performance tier.

This mid-pack ranking is consistent with the measured FPS data, which shows the combo can deliver smooth gameplay at lower settings but struggles to maintain high frame rates at Ultra presets. The data suggests the system is not a top performer for Archeage, but it is far from inadequate—it sits in a zone where tweaking settings yields substantial gains. The GPU’s percentile rank (72) is nearly identical to the CPU’s (73), implying neither component is a glaring weak link in isolation, yet their combined performance in this game lands them just below the upper quartile of tested systems.

Settings Recommendations

The measured FPS data makes a clear case for Medium settings as the sweet spot for this combo across most resolutions. At 1080p, Medium delivers 157.9 FPS, which is 11.2% higher than High’s 106.1 FPS and only 5.6% lower than Low’s 166.7 FPS, offering a substantial visual upgrade over Low while maintaining a frame rate well above the 60 FPS threshold. At 1440p, Medium produces 103.4 FPS, which is 45.6% faster than High’s 71 FPS and still comfortably smooth, whereas Low reaches 119.2 FPS but with diminished visuals. The pattern holds at 4K: Medium yields 59.7 FPS, just under the 60 FPS mark, while High drops to 41.7 FPS and Low hits 65.4 FPS—Medium is the only preset that balances playability and fidelity at this resolution.

Ultra settings are not recommended for this combo. At 1080p, Ultra produces 70.9 FPS, which is 55.1% slower than Medium and represents a steep performance penalty for marginal visual gains. At 1440p, Ultra falls to 45.8 FPS, and at 4K it plummets to 25.7 FPS, making it unplayable at higher resolutions. The data indicates that the jump from High to Ultra is disproportionately costly, with the RTX 3070’s 8 GB VRAM and 448.0 GB/s bandwidth likely hitting a wall. For the best experience, Medium is the default recommendation, with Low as a fallback for 4K users who prioritize frame rate over detail.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and reveals a GPU-bound scenario at higher resolutions. At High settings, the average frame rate falls from 106.1 FPS at 1080p to 71.0 FPS at 1440p—a 33.1% reduction—and then to 41.7 FPS at 4K, a 60.7% drop from the 1080p baseline. This pattern is consistent across all presets: Low goes from 166.7 FPS at 1080p to 119.2 FPS at 1440p (28.5% lower) and 65.4 FPS at 4K (60.8% lower), while Medium drops from 157.9 to 103.4 (34.5% lower) and then to 59.7 (62.2% lower). Ultra shows the most dramatic scaling, falling from 70.9 to 45.8 (35.4% lower) and then to 25.7 (63.8% lower).

The scaling behavior indicates the RTX 3070 is the limiting component as pixel count rises. The GPU’s 8 GB VRAM and 256-bit memory bus with 448.0 GB/s bandwidth are sufficient for 1080p and 1440p, but at 4K the card’s 20.31 TFLOPS of FP32 compute is taxed heavily, especially on Ultra where the 25.7 FPS result suggests the card is overwhelmed. The CPU’s role becomes less significant at higher resolutions, as the i5-10400F’s 6 cores and 12 threads are likely able to feed the GPU adequately at 1080p, but the consistent 60%+ drop from 1080p to 4K across all presets points squarely at GPU limitations rather than CPU bottlenecks.

FAQ

Q: What is the best preset for this combo at 1440p?

A: Medium settings provide the best balance, yielding 103.4 FPS at 1440p. High drops to 71.0 FPS, while Low reaches 119.2 FPS but sacrifices visual quality, and Ultra falls to 45.8 FPS.

Q: Can this combo handle 4K gaming in Archeage?

A: Yes, but only at Low or Medium settings. Low produces 65.4 FPS and Medium hits 59.7 FPS, while High and Ultra drop to 41.7 FPS and 25.7 FPS respectively, which are not smooth experiences.

Q: How does the RTX 3070 compare to its nearest rivals in this context?

A: The RTX 3070’s average benchmark score is 28238, placing it 0.9% ahead of the AMD Radeon RX 6600 XT and 1.0% ahead of the NVIDIA GeForce GTX 980 Ti, but 0.6% behind the AMD FirePro S7150 and 1.1% behind the AMD Radeon R9 M295X.

Q: Is the i5-10400F a bottleneck for the RTX 3070 in this game?

A: The data does not indicate a severe CPU bottleneck. At 1080p Low, the combo reaches 166.7 FPS, suggesting the CPU can keep up. The 60%+ FPS drop from 1080p to 4K across all presets points to GPU limits rather than CPU constraints.

Q: What frame rate can I expect at 1080p on Ultra settings?

A: The measured average is 70.9 FPS at 1080p Ultra. This is playable, but Medium offers 157.9 FPS, which is a 122.7% improvement and likely a better trade-off for most users.

Q: How much faster is Low vs. High at 4K?

A: Low at 4K produces 65.4 FPS, which is 56.8% faster than High’s 41.7 FPS. This makes Low the only preset at 4K that exceeds the 60 FPS threshold.

GPU Role

The NVIDIA GeForce RTX 3070 is the dominant component in this combo, and its role becomes more pronounced at higher resolutions and settings. The GPU features 5888 shading units, 184 texture mapping units, and 96 raster output pipelines, with a boost clock of 1725 MHz and a base clock of 1500 MHz. Its memory configuration—8 GB of GDDR6 on a 256-bit bus with 448.0 GB/s bandwidth—is adequate for 1080p and 1440p, but the measured FPS at 4K Ultra (25.7 FPS) shows the VRAM capacity and bandwidth are stretched thin when rendering full detail at that pixel count.

The GPU’s 72nd percentile rank among all GPUs is reflected in its average benchmark score of 28238, which places it in competition with the RX 6600 XT and GTX 980 Ti. In Archeage, the RTX 3070’s 20.31 TFLOPS of FP32 compute is the key driver of frame rates; the data shows that moving from Low to Ultra at 1080p reduces FPS from 166.7 to 70.9, a 57.5% drop, which correlates with the increased shading and texture work. The card’s 8 GB VRAM is sufficient for Medium settings at all resolutions tested, but the 4K Ultra result suggests that settings demanding more than this capacity cause a disproportionate performance hit. For this game, the GPU’s role is clear: it sets the ceiling for visual fidelity, and users should target Medium to stay within its comfort zone.

CPU Role

The Intel Core i5-10400F serves as the supporting component, providing 6 cores and 12 threads with a base clock of 2.90 GHz and a boost clock of 4.30 GHz. Its 12 MB of shared L3 cache and dual-channel DDR4 memory support (42.7 GB/s bandwidth) are standard for its class, and its benchmark scores—such as 10297 in Cinebench R23 multicore and 1453 in singlecore—place it in the 73rd percentile among all CPUs. In Archeage, the CPU’s role is primarily to feed the GPU with draw calls and game logic, and the data suggests it does this adequately at 1080p.

At 1080p Low, the combo achieves 166.7 FPS, which indicates the CPU is not a limiting factor at lower settings. However, the CPU’s influence wanes as resolution increases; the FPS drop from 1080p to 4K is nearly identical across all presets (60-64% reduction), which is a hallmark of GPU-bound performance. The i5-10400F’s nearest rivals include the AMD Ryzen 3 7320C (0.8% higher average score) and Intel Core i5-8500 (1.1% higher), showing it is competitive but not exceptional. For this game, the CPU’s 12 threads are likely sufficient for Archeage’s MMORPG workloads, which rarely scale beyond a handful of cores. The processor’s 65 W TDP and 14 nm process node are modest, but they do not appear to hinder performance in the measured scenarios. The data indicates the CPU is a stable foundation, but the GPU dictates the overall experience.