Archeage

The Intel Core i5-10400F paired with the AMD Radeon RX 7600 ranks 1155th out of 1727 tested combos in ArcheAge, placing it in the lower-middle tier of the database. This ranking reflects a combination that can handle the game at playable frame rates in most scenarios but struggles to deliver a consistently smooth experience at the highest settings and resolutions. The data indicates a system where the graphics card is the primary performance driver, but the CPU’s older architecture holds back high-refresh-rate potential at lower resolutions.

How This Combo Ranks

Out of 1727 tested combinations, this pairing sits at rank 1155, which places it in the 34th percentile of all systems measured. This is not a top-tier configuration for ArcheAge, but it is far from the bottom of the barrel. The rank suggests that while the combo can run the game, it will not excel in demanding 4K Ultra scenarios. The overall position is dragged down by the 4K Ultra result, which falls below 20 frames per second, a figure that is not competitive with higher-ranked systems. In contrast, the combo performs more respectably at 1080p, where its rank would be considerably higher if only that resolution were considered. The data shows that the pairing is best suited for 1080p or 1440p gaming, with the 4K results being a significant weak point.

CPU Role

The Intel Core i5-10400F is a 6-core, 12-thread processor from the Comet Lake architecture, with a base clock of 2.90 GHz and a boost clock of 4.30 GHz. Its benchmark scores show a strong multi-threaded capability, with a Cinebench R23 multi-core score of 10297 and a Passmark multithread score of 12115. The single-thread performance is also respectable, with a Geekbench single-core score of 1454. In ArcheAge, an MMORPG, the game’s engine often relies on a few primary threads for game logic and rendering commands. The CPU’s single-core performance, as indicated by the 3dmark_single_thread score of 688, is adequate to feed the GPU in most situations. However, the processor’s percentile rank of 73.0 versus all CPUs means it is not a top performer, and in CPU-bound scenarios, such as large player gatherings common in MMORPGs, it may become the limiting factor. The 12 MB of shared L3 cache and 42.7 GB/s memory bandwidth are sufficient for the game’s data demands, but the architecture is older, and its performance is close to rivals like the AMD Ryzen 3 7320C, which is 0.8% slower, and the Intel Core i5-8500, which is 1.1% faster.

GPU Role

The AMD Radeon RX 7600 is the stronger component in this pairing. It features 8 GB of GDDR6 memory on a 128-bit bus, delivering 288.0 GB/s of bandwidth. The GPU’s boost clock of 2655 MHz and 2048 shading units give it a Passmark G3D score of 16634, which places it in the 63rd percentile of all GPUs. Its performance is nearly identical to the Radeon RX 7600 XT, which is only 0.6% faster, and the Radeon RX 460, which is 0.8% slower. The RX 7600’s 8 GB of VRAM is a key consideration for ArcheAge at higher resolutions; the data shows that 4K Ultra is not viable, likely due to both VRAM capacity and raw compute limits. At 1080p and 1440p, the GPU has ample power to drive high frame rates, as evidenced by the 132.4 average FPS at 1080p Low settings. The GPU’s 21.75 TFLOPS of FP32 compute is more than enough for this 2014 title, meaning the GPU is rarely the bottleneck at lower resolutions.

Measured FPS Breakdown

The measured frame rates show a clear pattern of performance scaling with resolution and settings. At 1080p, the combo delivers excellent results: Low settings average 132.4 FPS, Medium averages 115 FPS, and High averages 79.1 FPS. Only Ultra at 1080p drops below 60 FPS, with an average of 53.4 FPS. Moving to 1440p, the frame rates remain playable but drop significantly: Low averages 88.4 FPS, Medium averages 80.3 FPS, High averages 54.9 FPS, and Ultra falls to 37.4 FPS. At 4K, the performance collapses: Low averages 47.9 FPS, Medium averages 44.1 FPS, High averages 32.1 FPS, and Ultra is unplayable at 19.5 FPS. These numbers indicate that the sweet spot for this combo is 1080p with High settings, or 1440p with Medium settings, both of which maintain frame rates well above 60 FPS.

Resolution Scaling

The performance drop from 1080p to 4K is steep and reveals the limiting component. From 1080p High to 1440p High, the frame rate drops by 24.2 FPS (from 79.1 to 54.9), a 30.6% reduction. From 1440p High to 4K High, the drop is another 22.8 FPS (from 54.9 to 32.1), a 41.5% reduction. This pattern suggests that as resolution increases, the GPU becomes the primary bottleneck, with its 8 GB VRAM and 128-bit memory bus struggling to feed the higher pixel counts. The CPU, however, shows its limits at lower resolutions. The difference between 1080p Low (132.4 FPS) and 1080p Ultra (53.4 FPS) is a massive 79 FPS, indicating that the CPU can push high frame rates when the GPU is not stressed, but the GPU cannot maintain them at higher settings. The scaling data indicates a balanced system at 1440p, where neither component is fully saturated, but at 1080p Low, the CPU is the limit, and at 4K Ultra, the GPU is the limit.

FAQ

Q: Can this combo run ArcheAge at 4K?

A: Yes, but only at Low settings, where it averages 47.9 FPS. At 4K High and Medium, the frame rates drop to 32.1 FPS and 44.1 FPS, respectively, and at 4K Ultra, the average is 19.5 FPS, which is not playable.

Q: What is the best resolution for this pairing?

A: The data shows that 1080p provides the most consistent experience, with all settings except Ultra averaging above 79 FPS. At 1440p, Medium settings are viable at 80.3 FPS, but High and Ultra drop below 55 FPS.

Q: Is the CPU or GPU the bottleneck?

A: The bottleneck shifts depending on settings. At 1080p Low, the high frame rate of 132.4 FPS suggests the CPU is the limiting factor. At 4K Ultra, the low frame rate of 19.5 FPS clearly indicates the GPU is the constraint.

Q: How does the RX 7600 compare to its nearest rivals?

A: The RX 7600’s average benchmark score of 20258 is nearly identical to the Radeon RX 7600 XT, which is 0.6% higher, and the Radeon RX 460, which is 0.8% higher. It is also slightly faster than the NVIDIA GeForce RTX 3070 Mobile, which is 1.3% slower.

Q: How does the i5-10400F compare to similar CPUs?

A: The i5-10400F’s average benchmark score of 14168 is 0.4% higher than the AMD EPYC 7552 and 1.1% higher than the Intel Core i5-8500. It is slightly slower than the AMD Ryzen 3 7320C, which is 0.8% faster.

Q: What is the performance gap between Low and Ultra settings at 1440p?

A: At 1440p, the difference is substantial. Low averages 88.4 FPS, while Ultra averages only 37.4 FPS, a reduction of 51 FPS, or roughly 58% lower performance.

Settings Recommendations

The measured data points to a clear best experience for this combo: 1080p with High settings, which delivers an average of 79.1 FPS. This provides a smooth, visually rich experience without the frame rate penalty of Ultra. For users with a 1440p monitor, Medium settings are the recommended choice, as the average of 80.3 FPS is ideal for competitive or immersive play. High at 1440p is acceptable at 54.9 FPS, but it is less consistent. Ultra settings should be avoided at any resolution, as the 1080p Ultra average of 53.4 FPS is below the 60 FPS threshold, and 1440p Ultra drops to 37.4 FPS. At 4K, only Low settings are advisable, but even then, the 47.9 FPS average is not ideal for a game that benefits from high responsiveness. The data suggests that prioritizing frame rate over maximum visual fidelity is the correct approach for this hardware combination.