Archeage

# Archeage Performance Analysis: AMD Ryzen AI Max+ 395 + NVIDIA GeForce RTX 5060

Resolution Scaling

The measured FPS data for Archeage with this hardware combination reveals a clear and predictable scaling pattern as resolution increases from 1920x1080 to 3840x2160. At 1080p, the system delivers 132 FPS on Low settings, which drops to 89 FPS at 1440p and further to 51 FPS at 4K. This represents a 61% reduction in frame rate from 1080p to 4K on Low settings, indicating that the GPU is becoming progressively more stressed as pixel count rises.

The scaling pattern becomes more pronounced when examining the High preset. At 1080p High, the system produces 80 FPS, falling to 54 FPS at 1440p and 31 FPS at 4K. The drop from 1080p to 1440p is 32.5%, while the drop from 1440p to 4K is 42.6%. This non-linear scaling suggests that at higher resolutions, the rendering workload increases faster than the linear pixel count would suggest, which is typical for games with complex shading and post-processing effects.

The Medium settings show similar trends with 118 FPS at 1080p, 79 FPS at 1440p, and 45 FPS at 4K. The 4K Medium result includes measured minimum and maximum values of 38 and 52 FPS respectively, showing a relatively tight frame time distribution. At 1440p Medium, the minimum is 67 FPS and maximum is 91 FPS, while at 1080p Medium, the range extends from 100 to 135 FPS.

Ultra settings produce the most dramatic scaling, with 54 FPS at 1080p, 37 FPS at 1440p, and 21 FPS at 4K. The 4K Ultra result is barely playable by most standards, while 1080p Ultra remains fluid. The gap between Low and Ultra at each resolution is substantial: at 1080p, the difference is 78 FPS (132 vs 54); at 1440p, it is 52 FPS (89 vs 37); and at 4K, it is 30 FPS (51 vs 21). This indicates that the game's quality settings have a compounding effect on GPU load when combined with higher resolutions.

The data suggests that the GPU is the primary limiting factor in this combination. The CPU's strong multi-threaded performance, evidenced by its Cinebench R23 multi-core score of 35314, is unlikely to bottleneck at any of these resolutions. Instead, the RTX 5060's 8 GB of GDDR7 memory and 448.0 GB/s bandwidth become the constraining resources as resolution increases, particularly at 4K where the pixel throughput demands exceed what the GPU can efficiently deliver.

CPU Role

The AMD Ryzen AI Max+ 395 is a 16-core, 32-thread processor based on the Zen 5 architecture, built on TSMC's 4 nm process node. It operates with a base clock of 3.00 GHz and a boost clock of 5.10 GHz, with 64 MB of shared L3 cache. This processor is designed for mobile platforms, using the AMD Socket FP11 with LPDDR5X memory support across a quad-channel interface delivering 256.0 GB/s of bandwidth.

In the context of Archeage, an MMORPG originally released on 2014-01-14, the CPU's role is primarily to handle game logic, network processing, and the many concurrent entities typical of massively multiplayer environments. The Ryzen AI Max+ 395's 32 threads provide substantial headroom for these workloads, and its strong single-thread performance — reflected in a Geekbench single-core score of 2464 and a Cinebench R23 single-core score of 2044 — ensures that the game's main thread can execute efficiently.

The CPU's benchmark results place it in the 95th percentile among all tested processors, with an average benchmark score of 77740. Its closest rivals include the AMD Ryzen Threadripper PRO 9945WX (1.6% higher score), the AMD EPYC Embedded 8224P (1.6% higher), and the Intel Core i9-14900K (1.7% lower). The AMD Ryzen 9 8945HX trails by 2%. These margins are tight, indicating that the Ryzen AI Max+ 395 performs competitively with high-end desktop and workstation processors despite its mobile market segment designation.

For Archeage specifically, the CPU's capabilities are more than sufficient for the frame rates observed in the measured data. Even at 1080p Low, where the system achieves 132 FPS, the CPU is unlikely to be the bottleneck given its multi-threaded performance. The PassMark multi-thread score of 54934 and the Cinebench R23 multi-core score of 35314 demonstrate that the processor can handle significant parallel workloads, which is beneficial for MMORPG environments with many players, NPCs, and dynamic objects.

The processor's 55 W TDP is notably efficient for a 16-core part, which may be relevant for sustained performance in thermally constrained mobile chassis. The LPDDR5X memory support with quad-channel configuration provides 256.0 GB/s of memory bandwidth, which helps feed both the CPU and the integrated Radeon 8060S graphics (though the discrete RTX 5060 handles the game rendering in this configuration).

GPU Role

The NVIDIA GeForce RTX 5060 is based on the Blackwell 2.0 architecture with the GB206 chip, manufactured on TSMC's 5 nm process. It features 3840 shading units, 120 TMUs, and 48 ROPs, with 30 RT cores and 120 tensor cores. The GPU operates at a base clock of 2280 MHz and a boost clock of 2497 MHz, with memory running at 1750 MHz (28 Gbps effective) across a 128-bit bus for 448.0 GB/s of bandwidth.

The 8 GB of GDDR7 memory is a critical specification for Archeage at higher resolutions. The measured FPS data shows that 4K Ultra produces only 21 FPS average, which suggests the GPU is severely constrained at that configuration. The 8 GB capacity may be insufficient for Ultra settings at 4K in this game, potentially causing texture thrashing or reduced texture quality. At 1080p, the GPU delivers 54 FPS on Ultra, indicating that the memory capacity is less of a limiting factor at lower pixel counts.

The GPU's benchmark results place it in the 72nd percentile among all tested graphics cards, with an average benchmark score of 26331. Its nearest rivals are the AMD Radeon 860M (0.3% higher), NVIDIA GeForce MX550 (0.3% higher), and AMD Radeon RX 5700 XT 50th Anniversary (0.8% higher). The AMD Radeon RX 6750 XT scores 1.2% lower. These extremely close margins suggest the RTX 5060 performs at a similar level to these competing products in synthetic benchmarks.

For Archeage, the GPU's role is dominant in determining frame rates across all tested configurations. The scaling from 1080p to 4K shows a clear GPU-bound pattern, with the frame rate dropping by more than half on most settings when moving to 4K. The 19.18 TFLOPS FP32 performance and 299.6 GTexel/s texture rate provide adequate throughput for 1080p gaming, but the 4K results indicate the GPU is overextended at that resolution, particularly on Ultra settings.

The RTX 5060's 145 W TDP and dual-slot design suggest it is a mainstream-oriented GPU, and its performance in Archeage reflects that positioning. The 3DMark Steel Nomad DX12 score of 3628 and Geekbench Vulkan score of 113321 provide additional context for its overall graphics capability, though the game-specific measured FPS data is more directly relevant for this analysis.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates across all settings. Low settings produce 132 FPS average, Medium produces 118 FPS with a range of 100 to 135 FPS, High produces 80 FPS, and Ultra produces 54 FPS. The progression from Low to Ultra shows a 59% reduction in frame rate, with each step up in quality exacting a significant toll. The gap between Medium and High is particularly large at 38 FPS, suggesting that High enables more demanding visual effects.

At 2560x1440, frame rates decrease across all settings. Low delivers 89 FPS, Medium produces 79 FPS with a range of 67 to 91 FPS, High produces 54 FPS, and Ultra drops to 37 FPS. The relative differences between settings remain similar to 1080p, though the absolute gaps narrow. The difference between Low and Ultra at 1440p is 52 FPS, compared to 78 FPS at 1080p, indicating that resolution scaling compresses the performance spread between quality presets.

At 3840x2160, the system struggles to maintain high frame rates. Low settings produce 51 FPS, Medium produces 45 FPS with a range of 38 to 52 FPS, High produces 31 FPS, and Ultra drops to 21 FPS. Only the Low preset approaches playable territory at 4K, and even then, the 51 FPS average is below the 60 FPS threshold many players prefer. Medium at 4K might be acceptable for less demanding players, but High and Ultra are not viable for smooth gameplay.

The Medium settings are the only ones with complete min/max data across all resolutions, providing insight into frame time consistency. At 1080p Medium, the 100-135 FPS range shows reasonable stability. At 1440p Medium, the 67-91 FPS range indicates good consistency. At 4K Medium, the 38-52 FPS range shows a tighter spread relative to the average, suggesting the GPU is consistently delivering around 45 FPS rather than experiencing severe frame time spikes.

The data reveals that the RTX 5060 can handle Archeage at 1080p with any settings, achieving at least 54 FPS even on Ultra. At 1440p, High and below remain playable, but Ultra drops to 37 FPS. At 4K, only Low and Medium exceed 30 FPS, with Medium's 45 FPS average being the most playable option at that resolution.

How This Combo Ranks

This specific combination of AMD Ryzen AI Max+ 395 and NVIDIA GeForce RTX 5060 ranks 2465 out of 3708 tested combos for Archeage, placing it in the 33rd percentile of all tested system configurations. This ranking reflects the GPU's mid-range positioning rather than the CPU's high-end capabilities, as the RTX 5060 is the limiting factor in most gaming scenarios.

The combo rank suggests that while the CPU is exceptionally strong — sitting in the 95th percentile of all processors — the overall gaming performance is constrained by the GPU's 72nd percentile standing. This mismatch is typical for configurations pairing high-end CPUs with mid-range GPUs, and Archeage's performance data confirms this dynamic. The system's ranking would likely improve with a more powerful GPU, but as configured, it represents a balanced mainstream gaming system.

Compared to other possible pairings, this combo's rank indicates that many other CPU-GPU combinations deliver better Archeage performance. The 3708 total combos represent a wide range of hardware configurations, and this system's 2465 position places it in the lower half of tested setups. However, the FPS data shows that the system is perfectly capable at 1080p and playable at 1440p for most settings, so the rank should be interpreted as a comparison against the entire test pool rather than an absolute measure of playability.

The rank also contextualizes the system's strengths and weaknesses. The CPU's high benchmark scores do not translate directly to gaming performance in Archeage, which is primarily GPU-bound at the tested resolutions. Players considering this combination should focus on the GPU's capabilities when evaluating expected performance, as the CPU will rarely bottleneck in this game.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution and the player's preference for visual quality versus frame rate smoothness.

For 1920x1080, Ultra settings are viable with 54 FPS average, though players seeking higher refresh rates may prefer High at 80 FPS or Medium at 118 FPS. The Medium setting offers the best balance of visual quality and performance at 1080p, with its 118 FPS average and 100-135 FPS range providing smooth gameplay on standard 60 Hz and 144 Hz displays. Low at 132 FPS is unnecessary unless maximum frame rates are desired.

For 2560x1440, High settings produce 54 FPS, which is acceptable for slower-paced MMORPG gameplay but may feel less fluid in combat-heavy situations. Medium at 79 FPS is the recommended choice for most players, offering a significant improvement over High's frame rate while maintaining reasonable visual fidelity. The 67-91 FPS range for Medium ensures consistent performance. Ultra at 37 FPS is not recommended for comfortable play, and Low at 89 FPS sacrifices too much visual quality for the modest gain over Medium.

For 3840x2160, the options are limited. Medium at 45 FPS is the highest quality setting that maintains a playable frame rate, though its 38-52 FPS range may dip below ideal smoothness in busy scenes. Low at 51 FPS provides a slightly higher average but with reduced visual quality. High at 31 FPS and Ultra at 21 FPS are not recommended for gameplay. Players targeting 4K should consider Medium as the maximum viable setting for this hardware combination.

Overall, Medium settings provide the best experience across all resolutions, delivering 118 FPS at 1080p, 79 FPS at 1440p, and 45 FPS at 4K. This preset offers a balanced compromise between visual fidelity and performance, making it the recommended choice for most players with this hardware.

FAQ

Q: What is the best resolution for this hardware combination in Archeage?

A: The data shows that 1920x1080 delivers the highest frame rates, with 132 FPS on Low, 118 FPS on Medium, 80 FPS on High, and 54 FPS on Ultra. At 2560x1440, the best result is 89 FPS on Low, while at 3840x2160, the maximum is 51 FPS on Low. For the best balance of visual quality and performance, 1440p Medium at 79 FPS is a strong option.

Q: Can this system run Archeage at 4K?

A: Yes, but only at lower settings. At 4K, Low produces 51 FPS and Medium produces 45 FPS with a range of 38 to 52 FPS. High drops to 31 FPS and Ultra to 21 FPS, which are not recommended for smooth gameplay. Medium is the highest viable setting at 4K.

Q: How does the CPU compare to its nearest rivals?

A: The AMD Ryzen AI Max+ 395 has an average benchmark score of 77740, placing it 1.6% behind the AMD Ryzen Threadripper PRO 9945WX, 1.6% behind the AMD EPYC Embedded 8224P, 1.7% ahead of the Intel Core i9-14900K, and 2% ahead of the AMD Ryzen 9 8945HX. It ranks in the 95th percentile of all CPUs.

Q: What is the GPU's performance ranking relative to other graphics cards?

A: The NVIDIA GeForce RTX 5060 has an average benchmark score of 26331, placing it in the 72nd percentile of all GPUs. Its nearest rivals include the AMD Radeon 860M (0.3% higher), NVIDIA GeForce MX550 (0.3% higher), AMD Radeon RX 5700 XT 50th Anniversary (0.8% higher), and AMD Radeon RX 6750 XT (1.2% lower).

Q: Why does the Ultra preset produce such low frame rates at 4K?

A: The 4K Ultra result of 21 FPS indicates that the RTX 5060's 8 GB of GDDR7 memory and 448.0 GB/s bandwidth are insufficient for the demands of Ultra settings at that resolution. The GPU's 19.18 TFLOPS FP32 performance is also stretched thin by the high pixel count and increased visual complexity.

Q: Should players use Low, Medium, High, or Ultra settings?

A: The data consistently shows Medium as the best choice across all resolutions. At 1080p, Medium delivers 118 FPS; at 1440p, it delivers 79 FPS; and at 4K, it delivers 45 FPS. Medium provides the best balance of visual quality and frame rate, while High and Ultra offer diminishing returns for significant performance losses.