Archeage

The AMD Ryzen 9 9900X paired with the NVIDIA GeForce RTX 5050 delivers a performance profile in Archeage that is heavily dictated by resolution and preset selection. The dataset shows a system that can achieve high refresh rates at 1080p with moderate settings, but which struggles to maintain playable frame rates at 4K Ultra. Analysis of the measured FPS rows reveals a clear pattern: the RTX 5050’s 8 GB VRAM and 128-bit memory interface become limiting factors as resolution scales, while the 12-core Ryzen 9 9900X provides ample headroom for the game’s CPU demands.

Resolution Scaling

The measured FPS data shows a steep performance drop as resolution increases from 1920x1080 to 3840x2160. At Low settings, the average frame rate falls from 136 FPS at 1080p to 91 FPS at 1440p, then to 52 FPS at 4K. This represents a 61.8% reduction from 1080p to 4K. The scaling pattern is consistent across all presets: High settings drop from 82 FPS (1080p) to 55 FPS (1440p) to 32 FPS (4K), while Medium settings drop from 121 FPS to 81 FPS to 47 FPS across the same resolution steps.

The most dramatic scaling occurs at Ultra settings, where the average frame rate plummets from 56 FPS at 1080p to 38 FPS at 1440p, and finally to 22 FPS at 4K. This 60.7% drop from 1080p to 4K at Ultra is nearly identical to the Low preset’s relative decline, suggesting that the GPU’s rendering pipeline is the primary bottleneck across all settings. The RTX 5050’s 8 GB VRAM capacity is likely exceeded at 4K Ultra, causing the frame rate to collapse below the 30 FPS threshold generally considered minimum for playability.

The resolution scaling data indicates that the limiting component shifts with resolution. At 1080p, the CPU’s performance ceiling appears to allow frame rates exceeding 130 FPS at Low settings, suggesting the GPU is not fully saturated. However, by 1440p, the GPU’s fill rate and memory bandwidth become more significant, and at 4K, the GPU is clearly the dominant constraint. The RTX 5050’s 320.0 GB/s memory bandwidth and 128-bit bus width are modest for 4K workloads, explaining why the frame rate drops to 22 FPS at Ultra.

FAQ

Q: What is the highest average FPS recorded in the measured data?

A: The highest average FPS is 136, achieved at 1920x1080 resolution with Low settings. This is followed by 121 FPS at the same resolution with Medium settings, and 91 FPS at 2560x1440 with Low settings.

Q: How does the system perform at 4K Ultra settings?

A: At 3840x2160 with Ultra settings, the average FPS drops to 22, which is below the threshold for smooth gameplay. This is the lowest average FPS recorded across all tested configurations.

Q: What is the frame time consistency at Medium settings?

A: At Medium settings, the dataset includes minimum and maximum FPS values. At 1920x1080, the range is 103 to 139 FPS (average 121). At 2560x1440, the range is 69 to 93 FPS (average 81). At 3840x2160, the range is 40 to 53 FPS (average 47). The spread widens proportionally as resolution increases.

Q: Which preset offers the best balance of visual quality and performance at 1440p?

A: At 2560x1440, Medium settings provide an average of 81 FPS, which is 47% higher than High settings (55 FPS) and more than double the Ultra preset’s 38 FPS. Low settings reach 91 FPS but at reduced visual fidelity.

Q: How does the combo rank among all tested configurations in Archeage?

A: The AMD Ryzen 9 9900X + NVIDIA GeForce RTX 5050 combination ranks 2279 out of 3708 tested combos, placing it in the lower 38.5% of all configurations for this game. This rank reflects the GPU’s limitations at higher resolutions.

Q: What is the minimum FPS recorded at 4K Medium settings?

A: At 3840x2160 with Medium settings, the minimum FPS is 40, with a maximum of 53. This provides an average of 47 FPS, which is the only 4K configuration that maintains an average above 45 FPS.

CPU Role

The AMD Ryzen 9 9900X is a 12-core, 24-thread processor based on the Zen 5 architecture, built on a 4 nm process at TSMC. It has a base clock of 4.40 GHz and a boost clock of 5.60 GHz, with 64 MB of L3 cache. The CPU’s benchmark scores indicate substantial single-thread and multi-thread capability: it achieves 1286 in 3DMark single-thread and 13929 in 3DMark max threads, with a Geekbench single-core score of 3010 and multi-core score of 22174.

In Archeage, an MMORPG, the CPU’s role is significant because the game relies on handling many entities, player characters, and server-side calculations. The Ryzen 9 9900X’s high single-thread performance (Cinebench R23 single-core score of 2253) ensures that the game’s main thread, which is often the bottleneck in MMOs, can process frame updates efficiently. The data supports this: at 1080p Low settings, the system reaches 136 FPS, indicating that the CPU can feed the GPU with enough draw calls and state updates to exceed typical 144 Hz monitor refresh rates.

The 12-core configuration provides headroom for background processes and the game’s auxiliary threads. However, the benchmark results show that the CPU is not the primary constraint in most tested scenarios. The frame rate drops at higher resolutions are consistent with GPU-bound behavior, as the CPU’s performance does not degrade with resolution. The Ryzen 9 9900X’s percentile rank of 92 (vs. all CPUs) and its average benchmark score of 57498 place it in the top tier of processors, with nearest rivals including the AMD EPYC 9015 (deltaPct -0.1%) and Intel Core i9-14900 (deltaPct -1.1%).

At 1080p, the CPU’s capability is evident in the ability to sustain 136 FPS at Low settings. The gap between Low (136 FPS) and Ultra (56 FPS) at 1080p highlights that even with a strong CPU, the GPU’s rasterization throughput limits Ultra preset performance. The CPU’s 24 threads ensure that any multi-threaded game logic, including physics and AI updates, does not become a bottleneck, allowing the GPU to be the sole performance limiter at higher resolutions.

Settings Recommendations

For the best measured experience, Medium settings at 1920x1080 provide an average of 121 FPS, with a minimum of 103 FPS and maximum of 139 FPS. This configuration offers a 47.6% improvement over High settings (82 FPS) while maintaining a frame rate well above 100 FPS for smooth gameplay. The minimum FPS of 103 ensures that even in busy scenes, the frame rate does not drop below the 100 FPS threshold, making this the most consistent high-performance option.

At 2560x1440, Medium settings deliver an average of 81 FPS, which is the recommended balance for higher resolution. The minimum FPS of 69 indicates that occasional drops to 69 FPS may occur, but the overall experience remains fluid. Low settings at 1440p achieve 91 FPS average, but the visual quality reduction may not be worth the 12.3% FPS gain over Medium. Ultra settings at 1440p (38 FPS) are not recommended due to the sub-60 FPS average.

For 4K gameplay, the data shows that only Medium settings maintain an average above 45 FPS, with 47 FPS average and a minimum of 40 FPS. Low settings at 4K reach 52 FPS average, which is the highest 4K result, but the visual compromise is significant. High settings at 4K (32 FPS) and Ultra settings at 4K (22 FPS) are below playable thresholds and should be avoided. The RTX 5050’s 8 GB VRAM and 320.0 GB/s bandwidth are insufficient for high-fidelity 4K rendering in Archeage.

The optimal preset depends on resolution priorities. For 1080p users, Medium settings offer the best combination of visual quality and performance, with High settings (82 FPS) also viable for those prioritizing image quality. At 1440p, Medium is the clear choice. At 4K, users must either accept Low settings (52 FPS) or Medium settings (47 FPS) for playable frame rates, acknowledging that neither provides a high-refresh experience.

How This Combo Ranks

The AMD Ryzen 9 9900X + NVIDIA GeForce RTX 5050 combination ranks 2279 out of 3708 tested combos in Archeage. This places the system in the lower 61.5% percentile of all configurations tested, indicating that while it is not a bottom-tier performer, it falls significantly short of high-end combinations. The rank reflects the GPU’s mid-range positioning (66th percentile vs. all GPUs) and the CPU’s high-end capabilities (92nd percentile vs. all CPUs), with the GPU acting as the limiting factor.

The combo’s rank of 2279 suggests that many other GPU+CPU pairings achieve higher frame rates in Archeage. The RTX 5050’s nearest rivals in GPU benchmark scores include the AMD Radeon RX Vega M GL (deltaPct -0.6%) and the AMD Radeon RX 5600 XT (deltaPct 1.6%), indicating that the RTX 5050 is positioned among mid-range GPUs. The CPU’s nearest rivals (AMD EPYC 9015, AMD EPYC 7313, Intel Core i9-14900) are all high-core-count processors, but their performance parity with the Ryzen 9 9900X (within ±1.4%) suggests that CPU choice is not the differentiator in this ranking.

The 3708 total combos represent a wide range of hardware configurations, and the 2279 rank places this combo in the third quartile of performance. This is consistent with the measured FPS data, which shows the system capable of 136 FPS at 1080p Low but only 22 FPS at 4K Ultra. The ranking likely reflects the average performance across all resolutions and settings, where the GPU’s 4K limitations pull the overall score down. For users targeting 1080p or 1440p gameplay, the combo performs adequately, but for 4K enthusiasts, it falls short of the top 50% of tested systems.

Measured FPS Breakdown

At 1920x1080, the measured average FPS values are: Low 136, Medium 121 (min 103, max 139), High 82, and Ultra 56. The Medium preset provides the most complete data with minimum and maximum values, showing a 36 FPS spread between the lowest and highest frames. The progression from Low to Ultra shows a 58.8% reduction in average FPS (from 136 to 56), with the largest single-step drop occurring between High (82) and Ultra (56), a 31.7% decrease.

At 2560x1440, the average FPS values are: Low 91, Medium 81 (min 69, max 93), High 55, and Ultra 38. The Medium preset’s frame range (69 to 93) shows a 24 FPS spread, which is proportionally larger than at 1080p. The drop from Low to Ultra is 58.2%, nearly identical to the 1080p scaling. The transition from High (55) to Ultra (38) again shows the largest single-step drop at 30.9%.

At 3840x2160, the average FPS values are: Low 52, Medium 47 (min 40, max 53), High 32, and Ultra 22. The Medium preset shows a 13 FPS range (40 to 53), which is the narrowest absolute spread across all resolutions. The scaling from Low to Ultra is 57.7%, consistent with the other resolutions. The High to Ultra drop (32 to 22) is 31.3%, maintaining the pattern of a significant penalty when enabling Ultra.

The data reveals that the relative performance scaling from Low to Ultra is remarkably consistent across resolutions (57-59% reduction), suggesting that the presets themselves impose a fixed rendering workload ratio. The absolute FPS values show that only 1080p Low (136 FPS) and 1080p Medium (121 FPS) exceed 120 FPS, while 1440p Low (91 FPS) and 1080p High (82 FPS) are the next tier. The sub-60 FPS results at 4K (all presets) and 1440p Ultra (38 FPS) indicate that these configurations are not suited for competitive or high-refresh gameplay.

GPU Role

The NVIDIA GeForce RTX 5050 is built on the Blackwell 2.0 architecture, using the GB207 chip on a 5 nm process at TSMC. It features 8 GB of GDDR6 memory on a 128-bit bus, providing 320.0 GB/s of memory bandwidth. The GPU has 2560 shading units, 80 TMUs, and 32 ROPs, with base and boost clocks of 2317 MHz and 2572 MHz respectively. Its 13.17 TFLOPS FP32 performance and 82.30 GPixel/s pixel rate define its rasterization capabilities.

In Archeage, the GPU’s role becomes increasingly dominant as resolution increases. At 1080p, the GPU’s 8 GB VRAM is sufficient for the game’s textures and geometry, allowing frame rates up to 136 FPS. However, at 4K, the memory capacity and bandwidth become critical. The 8 GB VRAM is likely to be fully utilized at 4K Ultra, leading to texture swapping and the observed 22 FPS average. The 128-bit memory interface, which delivers 320.0 GB/s, is a significant constraint for 4K rendering where each frame requires substantially more memory transactions.

The GPU’s benchmark scores indicate its mid-range positioning: a PassMark G3D score of 17326 and a 3DMark Steel Nomad DX12 score of 2502. Its percentile rank of 66 (vs. all GPUs) places it in the upper two-thirds of GPUs, but its nearest rivals include the AMD Radeon RX 5600 XT (deltaPct 1.6%) and the AMD Radeon HD 8970M (deltaPct -1%), showing it competes with older and lower-tier cards. The RTX 5050’s 20 RT cores and 80 tensor cores provide hardware support for ray tracing and DLSS features, but Archeage’s measured FPS data does not indicate these features are heavily utilized at lower resolutions.

The GPU’s 130 W TDP and dual-slot design suggest it is a power-efficient mid-range card. The 8 GB VRAM is the most significant limitation for 4K performance, as evidenced by the 47 FPS at 4K Medium versus 81 FPS at 1440p Medium. This 42% drop from 1440p to 4K at the same settings highlights the memory bandwidth and capacity constraints. At 1080p, the GPU is less stressed, and the CPU’s high performance allows the system to reach frame rates that would be considered excellent for an MMORPG. The data shows that the RTX 5050 is best suited for 1080p and 1440p gaming, with 4K requiring significant settings reductions to maintain playable frame rates.